#include <linux/types.h>

Include dependency graph for nl80211-new.h:

This graph shows which files directly or indirectly include this file:

Classes
struct	nl80211_sta_flag_update

struct	nl80211_txrate_vht

struct	nl80211_pattern_support

struct	nl80211_wowlan_tcp_data_seq

struct	nl80211_wowlan_tcp_data_token

struct	nl80211_wowlan_tcp_data_token_feature

struct	nl80211_coalesce_rule_support

struct	nl80211_vendor_cmd_info

struct	nl80211_bss_select_rssi_adjust

Macros
#define	NL80211_GENL_NAME "nl80211"

#define	NL80211_MULTICAST_GROUP_CONFIG "config"

#define	NL80211_MULTICAST_GROUP_SCAN "scan"

#define	NL80211_MULTICAST_GROUP_REG "regulatory"

#define	NL80211_MULTICAST_GROUP_MLME "mlme"

#define	NL80211_MULTICAST_GROUP_VENDOR "vendor"

#define	NL80211_MULTICAST_GROUP_NAN "nan"

#define	NL80211_MULTICAST_GROUP_TESTMODE "testmode"

#define	NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS

#define	NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE

#define	NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE

#define	NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE

#define	NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE

#define	NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE

#define	NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE

#define	NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT

#define	NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS

#define	NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG

#define	NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG

#define	NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE

#define	NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION

#define	NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG

#define	NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER

#define	NL80211_CMD_CONNECT NL80211_CMD_CONNECT

#define	NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY

#define	NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES

#define	NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS

#define	NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ

#define	NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE

#define	NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE

#define	NL80211_ATTR_IE NL80211_ATTR_IE

#define	NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR

#define	NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE

#define	NL80211_ATTR_FRAME NL80211_ATTR_FRAME

#define	NL80211_ATTR_SSID NL80211_ATTR_SSID

#define	NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE

#define	NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE

#define	NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE

#define	NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP

#define	NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS

#define	NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES

#define	NL80211_ATTR_KEY NL80211_ATTR_KEY

#define	NL80211_ATTR_KEYS NL80211_ATTR_KEYS

#define	NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS

#define	NL80211_MAX_SUPP_RATES 32

#define	NL80211_MAX_SUPP_HT_RATES 77

#define	NL80211_MAX_SUPP_REG_RULES 64

#define	NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0

#define	NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16

#define	NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24

#define	NL80211_HT_CAPABILITY_LEN 26

#define	NL80211_VHT_CAPABILITY_LEN 12

#define	NL80211_MAX_NR_CIPHER_SUITES 5

#define	NL80211_MAX_NR_AKM_SUITES 2

#define	NL80211_MIN_REMAIN_ON_CHANNEL_TIME 10

#define	NL80211_SCAN_RSSI_THOLD_OFF -300

#define	NL80211_CQM_TXE_MAX_INTVL 1800

#define	NL80211_STA_FLAG_MAX_OLD_API NL80211_STA_FLAG_TDLS_PEER

#define	NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA

#define	NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER

#define	NL80211_FREQUENCY_ATTR_PASSIVE_SCAN NL80211_FREQUENCY_ATTR_NO_IR

#define	NL80211_FREQUENCY_ATTR_NO_IBSS NL80211_FREQUENCY_ATTR_NO_IR

#define	NL80211_FREQUENCY_ATTR_NO_IR NL80211_FREQUENCY_ATTR_NO_IR

#define	NL80211_FREQUENCY_ATTR_GO_CONCURRENT NL80211_FREQUENCY_ATTR_IR_CONCURRENT

#define	NL80211_ATTR_SCHED_SCAN_MATCH_SSID NL80211_SCHED_SCAN_MATCH_ATTR_SSID

#define	NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR

#define	NL80211_RRF_NO_IBSS NL80211_RRF_NO_IR

#define	NL80211_RRF_NO_IR NL80211_RRF_NO_IR

#define	NL80211_RRF_NO_HT40

#define	NL80211_RRF_GO_CONCURRENT NL80211_RRF_IR_CONCURRENT

#define	NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR \| __NL80211_RRF_NO_IBSS)

#define	NL80211_SURVEY_INFO_CHANNEL_TIME NL80211_SURVEY_INFO_TIME

#define	NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY NL80211_SURVEY_INFO_TIME_BUSY

#define	NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY NL80211_SURVEY_INFO_TIME_EXT_BUSY

#define	NL80211_SURVEY_INFO_CHANNEL_TIME_RX NL80211_SURVEY_INFO_TIME_RX

#define	NL80211_SURVEY_INFO_CHANNEL_TIME_TX NL80211_SURVEY_INFO_TIME_TX

#define	NL80211_TXQ_ATTR_QUEUE NL80211_TXQ_ATTR_AC

#define	NL80211_TXQ_Q_VO NL80211_AC_VO

#define	NL80211_TXQ_Q_VI NL80211_AC_VI

#define	NL80211_TXQ_Q_BE NL80211_AC_BE

#define	NL80211_TXQ_Q_BK NL80211_AC_BK

#define	NL80211_TXRATE_MCS NL80211_TXRATE_HT

#define	NL80211_VHT_NSS_MAX 8

#define	__NL80211_WOWLAN_PKTPAT_INVALID __NL80211_PKTPAT_INVALID

#define	NL80211_WOWLAN_PKTPAT_MASK NL80211_PKTPAT_MASK

#define	NL80211_WOWLAN_PKTPAT_PATTERN NL80211_PKTPAT_PATTERN

#define	NL80211_WOWLAN_PKTPAT_OFFSET NL80211_PKTPAT_OFFSET

#define	NUM_NL80211_WOWLAN_PKTPAT NUM_NL80211_PKTPAT

#define	MAX_NL80211_WOWLAN_PKTPAT MAX_NL80211_PKTPAT

#define	nl80211_wowlan_pattern_support nl80211_pattern_support

#define	NL80211_KCK_LEN 16

#define	NL80211_KEK_LEN 16

#define	NL80211_REPLAY_CTR_LEN 8

#define	NL80211_CRIT_PROTO_MAX_DURATION 5000 /* msec */

#define	NL80211_VENDOR_ID_IS_LINUX 0x80000000

#define	NL80211_NAN_FUNC_SERVICE_ID_LEN 6

#define	NL80211_NAN_FUNC_SERVICE_SPEC_INFO_MAX_LEN 0xff

#define	NL80211_NAN_FUNC_SRF_MAX_LEN 0xff

Enumerations
enum	nl80211_commands { NL80211_CMD_UNSPEC, NL80211_CMD_GET_WIPHY, NL80211_CMD_SET_WIPHY, NL80211_CMD_NEW_WIPHY, NL80211_CMD_DEL_WIPHY, NL80211_CMD_GET_INTERFACE, NL80211_CMD_SET_INTERFACE, NL80211_CMD_NEW_INTERFACE, NL80211_CMD_DEL_INTERFACE, NL80211_CMD_GET_KEY, NL80211_CMD_SET_KEY, NL80211_CMD_NEW_KEY, NL80211_CMD_DEL_KEY, NL80211_CMD_GET_BEACON, NL80211_CMD_SET_BEACON, NL80211_CMD_START_AP, NL80211_CMD_NEW_BEACON = NL80211_CMD_START_AP, NL80211_CMD_STOP_AP, NL80211_CMD_DEL_BEACON = NL80211_CMD_STOP_AP, NL80211_CMD_GET_STATION, NL80211_CMD_SET_STATION, NL80211_CMD_NEW_STATION, NL80211_CMD_DEL_STATION, NL80211_CMD_GET_MPATH, NL80211_CMD_SET_MPATH, NL80211_CMD_NEW_MPATH, NL80211_CMD_DEL_MPATH, NL80211_CMD_SET_BSS, NL80211_CMD_SET_REG, NL80211_CMD_REQ_SET_REG, NL80211_CMD_GET_MESH_CONFIG, NL80211_CMD_SET_MESH_CONFIG, NL80211_CMD_SET_MGMT_EXTRA_IE, NL80211_CMD_GET_REG, NL80211_CMD_GET_SCAN, NL80211_CMD_TRIGGER_SCAN, NL80211_CMD_NEW_SCAN_RESULTS, NL80211_CMD_SCAN_ABORTED, NL80211_CMD_REG_CHANGE, NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE, NL80211_CMD_DEAUTHENTICATE, NL80211_CMD_DISASSOCIATE, NL80211_CMD_MICHAEL_MIC_FAILURE, NL80211_CMD_REG_BEACON_HINT, NL80211_CMD_JOIN_IBSS, NL80211_CMD_LEAVE_IBSS, NL80211_CMD_TESTMODE, NL80211_CMD_CONNECT, NL80211_CMD_ROAM, NL80211_CMD_DISCONNECT, NL80211_CMD_SET_WIPHY_NETNS, NL80211_CMD_GET_SURVEY, NL80211_CMD_NEW_SURVEY_RESULTS, NL80211_CMD_SET_PMKSA, NL80211_CMD_DEL_PMKSA, NL80211_CMD_FLUSH_PMKSA, NL80211_CMD_REMAIN_ON_CHANNEL, NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL, NL80211_CMD_SET_TX_BITRATE_MASK, NL80211_CMD_REGISTER_FRAME, NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME, NL80211_CMD_FRAME, NL80211_CMD_ACTION = NL80211_CMD_FRAME, NL80211_CMD_FRAME_TX_STATUS, NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS, NL80211_CMD_SET_POWER_SAVE, NL80211_CMD_GET_POWER_SAVE, NL80211_CMD_SET_CQM, NL80211_CMD_NOTIFY_CQM, NL80211_CMD_SET_CHANNEL, NL80211_CMD_SET_WDS_PEER, NL80211_CMD_FRAME_WAIT_CANCEL, NL80211_CMD_JOIN_MESH, NL80211_CMD_LEAVE_MESH, NL80211_CMD_UNPROT_DEAUTHENTICATE, NL80211_CMD_UNPROT_DISASSOCIATE, NL80211_CMD_NEW_PEER_CANDIDATE, NL80211_CMD_GET_WOWLAN, NL80211_CMD_SET_WOWLAN, NL80211_CMD_START_SCHED_SCAN, NL80211_CMD_STOP_SCHED_SCAN, NL80211_CMD_SCHED_SCAN_RESULTS, NL80211_CMD_SCHED_SCAN_STOPPED, NL80211_CMD_SET_REKEY_OFFLOAD, NL80211_CMD_PMKSA_CANDIDATE, NL80211_CMD_TDLS_OPER, NL80211_CMD_TDLS_MGMT, NL80211_CMD_UNEXPECTED_FRAME, NL80211_CMD_PROBE_CLIENT, NL80211_CMD_REGISTER_BEACONS, NL80211_CMD_UNEXPECTED_4ADDR_FRAME, NL80211_CMD_SET_NOACK_MAP, NL80211_CMD_CH_SWITCH_NOTIFY, NL80211_CMD_START_P2P_DEVICE, NL80211_CMD_STOP_P2P_DEVICE, NL80211_CMD_CONN_FAILED, NL80211_CMD_SET_MCAST_RATE, NL80211_CMD_SET_MAC_ACL, NL80211_CMD_RADAR_DETECT, NL80211_CMD_GET_PROTOCOL_FEATURES, NL80211_CMD_UPDATE_FT_IES, NL80211_CMD_FT_EVENT, NL80211_CMD_CRIT_PROTOCOL_START, NL80211_CMD_CRIT_PROTOCOL_STOP, NL80211_CMD_GET_COALESCE, NL80211_CMD_SET_COALESCE, NL80211_CMD_CHANNEL_SWITCH, NL80211_CMD_VENDOR, NL80211_CMD_SET_QOS_MAP, NL80211_CMD_ADD_TX_TS, NL80211_CMD_DEL_TX_TS, NL80211_CMD_GET_MPP, NL80211_CMD_JOIN_OCB, NL80211_CMD_LEAVE_OCB, NL80211_CMD_CH_SWITCH_STARTED_NOTIFY, NL80211_CMD_TDLS_CHANNEL_SWITCH, NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH, NL80211_CMD_WIPHY_REG_CHANGE, NL80211_CMD_ABORT_SCAN, NL80211_CMD_START_NAN, NL80211_CMD_STOP_NAN, NL80211_CMD_ADD_NAN_FUNCTION, NL80211_CMD_DEL_NAN_FUNCTION, NL80211_CMD_CHANGE_NAN_CONFIG, NL80211_CMD_NAN_MATCH, __NL80211_CMD_AFTER_LAST, NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1 }

enum	nl80211_attrs { NL80211_ATTR_UNSPEC, NL80211_ATTR_WIPHY, NL80211_ATTR_WIPHY_NAME, NL80211_ATTR_IFINDEX, NL80211_ATTR_IFNAME, NL80211_ATTR_IFTYPE, NL80211_ATTR_MAC, NL80211_ATTR_KEY_DATA, NL80211_ATTR_KEY_IDX, NL80211_ATTR_KEY_CIPHER, NL80211_ATTR_KEY_SEQ, NL80211_ATTR_KEY_DEFAULT, NL80211_ATTR_BEACON_INTERVAL, NL80211_ATTR_DTIM_PERIOD, NL80211_ATTR_BEACON_HEAD, NL80211_ATTR_BEACON_TAIL, NL80211_ATTR_STA_AID, NL80211_ATTR_STA_FLAGS, NL80211_ATTR_STA_LISTEN_INTERVAL, NL80211_ATTR_STA_SUPPORTED_RATES, NL80211_ATTR_STA_VLAN, NL80211_ATTR_STA_INFO, NL80211_ATTR_WIPHY_BANDS, NL80211_ATTR_MNTR_FLAGS, NL80211_ATTR_MESH_ID, NL80211_ATTR_STA_PLINK_ACTION, NL80211_ATTR_MPATH_NEXT_HOP, NL80211_ATTR_MPATH_INFO, NL80211_ATTR_BSS_CTS_PROT, NL80211_ATTR_BSS_SHORT_PREAMBLE, NL80211_ATTR_BSS_SHORT_SLOT_TIME, NL80211_ATTR_HT_CAPABILITY, NL80211_ATTR_SUPPORTED_IFTYPES, NL80211_ATTR_REG_ALPHA2, NL80211_ATTR_REG_RULES, NL80211_ATTR_MESH_CONFIG, NL80211_ATTR_BSS_BASIC_RATES, NL80211_ATTR_WIPHY_TXQ_PARAMS, NL80211_ATTR_WIPHY_FREQ, NL80211_ATTR_WIPHY_CHANNEL_TYPE, NL80211_ATTR_KEY_DEFAULT_MGMT, NL80211_ATTR_MGMT_SUBTYPE, NL80211_ATTR_IE, NL80211_ATTR_MAX_NUM_SCAN_SSIDS, NL80211_ATTR_SCAN_FREQUENCIES, NL80211_ATTR_SCAN_SSIDS, NL80211_ATTR_GENERATION, NL80211_ATTR_BSS, NL80211_ATTR_REG_INITIATOR, NL80211_ATTR_REG_TYPE, NL80211_ATTR_SUPPORTED_COMMANDS, NL80211_ATTR_FRAME, NL80211_ATTR_SSID, NL80211_ATTR_AUTH_TYPE, NL80211_ATTR_REASON_CODE, NL80211_ATTR_KEY_TYPE, NL80211_ATTR_MAX_SCAN_IE_LEN, NL80211_ATTR_CIPHER_SUITES, NL80211_ATTR_FREQ_BEFORE, NL80211_ATTR_FREQ_AFTER, NL80211_ATTR_FREQ_FIXED, NL80211_ATTR_WIPHY_RETRY_SHORT, NL80211_ATTR_WIPHY_RETRY_LONG, NL80211_ATTR_WIPHY_FRAG_THRESHOLD, NL80211_ATTR_WIPHY_RTS_THRESHOLD, NL80211_ATTR_TIMED_OUT, NL80211_ATTR_USE_MFP, NL80211_ATTR_STA_FLAGS2, NL80211_ATTR_CONTROL_PORT, NL80211_ATTR_TESTDATA, NL80211_ATTR_PRIVACY, NL80211_ATTR_DISCONNECTED_BY_AP, NL80211_ATTR_STATUS_CODE, NL80211_ATTR_CIPHER_SUITES_PAIRWISE, NL80211_ATTR_CIPHER_SUITE_GROUP, NL80211_ATTR_WPA_VERSIONS, NL80211_ATTR_AKM_SUITES, NL80211_ATTR_REQ_IE, NL80211_ATTR_RESP_IE, NL80211_ATTR_PREV_BSSID, NL80211_ATTR_KEY, NL80211_ATTR_KEYS, NL80211_ATTR_PID, NL80211_ATTR_4ADDR, NL80211_ATTR_SURVEY_INFO, NL80211_ATTR_PMKID, NL80211_ATTR_MAX_NUM_PMKIDS, NL80211_ATTR_DURATION, NL80211_ATTR_COOKIE, NL80211_ATTR_WIPHY_COVERAGE_CLASS, NL80211_ATTR_TX_RATES, NL80211_ATTR_FRAME_MATCH, NL80211_ATTR_ACK, NL80211_ATTR_PS_STATE, NL80211_ATTR_CQM, NL80211_ATTR_LOCAL_STATE_CHANGE, NL80211_ATTR_AP_ISOLATE, NL80211_ATTR_WIPHY_TX_POWER_SETTING, NL80211_ATTR_WIPHY_TX_POWER_LEVEL, NL80211_ATTR_TX_FRAME_TYPES, NL80211_ATTR_RX_FRAME_TYPES, NL80211_ATTR_FRAME_TYPE, NL80211_ATTR_CONTROL_PORT_ETHERTYPE, NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, NL80211_ATTR_SUPPORT_IBSS_RSN, NL80211_ATTR_WIPHY_ANTENNA_TX, NL80211_ATTR_WIPHY_ANTENNA_RX, NL80211_ATTR_MCAST_RATE, NL80211_ATTR_OFFCHANNEL_TX_OK, NL80211_ATTR_BSS_HT_OPMODE, NL80211_ATTR_KEY_DEFAULT_TYPES, NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION, NL80211_ATTR_MESH_SETUP, NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX, NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX, NL80211_ATTR_SUPPORT_MESH_AUTH, NL80211_ATTR_STA_PLINK_STATE, NL80211_ATTR_WOWLAN_TRIGGERS, NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, NL80211_ATTR_SCHED_SCAN_INTERVAL, NL80211_ATTR_INTERFACE_COMBINATIONS, NL80211_ATTR_SOFTWARE_IFTYPES, NL80211_ATTR_REKEY_DATA, NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS, NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN, NL80211_ATTR_SCAN_SUPP_RATES, NL80211_ATTR_HIDDEN_SSID, NL80211_ATTR_IE_PROBE_RESP, NL80211_ATTR_IE_ASSOC_RESP, NL80211_ATTR_STA_WME, NL80211_ATTR_SUPPORT_AP_UAPSD, NL80211_ATTR_ROAM_SUPPORT, NL80211_ATTR_SCHED_SCAN_MATCH, NL80211_ATTR_MAX_MATCH_SETS, NL80211_ATTR_PMKSA_CANDIDATE, NL80211_ATTR_TX_NO_CCK_RATE, NL80211_ATTR_TDLS_ACTION, NL80211_ATTR_TDLS_DIALOG_TOKEN, NL80211_ATTR_TDLS_OPERATION, NL80211_ATTR_TDLS_SUPPORT, NL80211_ATTR_TDLS_EXTERNAL_SETUP, NL80211_ATTR_DEVICE_AP_SME, NL80211_ATTR_DONT_WAIT_FOR_ACK, NL80211_ATTR_FEATURE_FLAGS, NL80211_ATTR_PROBE_RESP_OFFLOAD, NL80211_ATTR_PROBE_RESP, NL80211_ATTR_DFS_REGION, NL80211_ATTR_DISABLE_HT, NL80211_ATTR_HT_CAPABILITY_MASK, NL80211_ATTR_NOACK_MAP, NL80211_ATTR_INACTIVITY_TIMEOUT, NL80211_ATTR_RX_SIGNAL_DBM, NL80211_ATTR_BG_SCAN_PERIOD, NL80211_ATTR_WDEV, NL80211_ATTR_USER_REG_HINT_TYPE, NL80211_ATTR_CONN_FAILED_REASON, NL80211_ATTR_SAE_DATA, NL80211_ATTR_VHT_CAPABILITY, NL80211_ATTR_SCAN_FLAGS, NL80211_ATTR_CHANNEL_WIDTH, NL80211_ATTR_CENTER_FREQ1, NL80211_ATTR_CENTER_FREQ2, NL80211_ATTR_P2P_CTWINDOW, NL80211_ATTR_P2P_OPPPS, NL80211_ATTR_LOCAL_MESH_POWER_MODE, NL80211_ATTR_ACL_POLICY, NL80211_ATTR_MAC_ADDRS, NL80211_ATTR_MAC_ACL_MAX, NL80211_ATTR_RADAR_EVENT, NL80211_ATTR_EXT_CAPA, NL80211_ATTR_EXT_CAPA_MASK, NL80211_ATTR_STA_CAPABILITY, NL80211_ATTR_STA_EXT_CAPABILITY, NL80211_ATTR_PROTOCOL_FEATURES, NL80211_ATTR_SPLIT_WIPHY_DUMP, NL80211_ATTR_DISABLE_VHT, NL80211_ATTR_VHT_CAPABILITY_MASK, NL80211_ATTR_MDID, NL80211_ATTR_IE_RIC, NL80211_ATTR_CRIT_PROT_ID, NL80211_ATTR_MAX_CRIT_PROT_DURATION, NL80211_ATTR_PEER_AID, NL80211_ATTR_COALESCE_RULE, NL80211_ATTR_CH_SWITCH_COUNT, NL80211_ATTR_CH_SWITCH_BLOCK_TX, NL80211_ATTR_CSA_IES, NL80211_ATTR_CSA_C_OFF_BEACON, NL80211_ATTR_CSA_C_OFF_PRESP, NL80211_ATTR_RXMGMT_FLAGS, NL80211_ATTR_STA_SUPPORTED_CHANNELS, NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES, NL80211_ATTR_HANDLE_DFS, NL80211_ATTR_SUPPORT_5_MHZ, NL80211_ATTR_SUPPORT_10_MHZ, NL80211_ATTR_OPMODE_NOTIF, NL80211_ATTR_VENDOR_ID, NL80211_ATTR_VENDOR_SUBCMD, NL80211_ATTR_VENDOR_DATA, NL80211_ATTR_VENDOR_EVENTS, NL80211_ATTR_QOS_MAP, NL80211_ATTR_MAC_HINT, NL80211_ATTR_WIPHY_FREQ_HINT, NL80211_ATTR_MAX_AP_ASSOC_STA, NL80211_ATTR_TDLS_PEER_CAPABILITY, NL80211_ATTR_SOCKET_OWNER, NL80211_ATTR_CSA_C_OFFSETS_TX, NL80211_ATTR_MAX_CSA_COUNTERS, NL80211_ATTR_TDLS_INITIATOR, NL80211_ATTR_USE_RRM, NL80211_ATTR_WIPHY_DYN_ACK, NL80211_ATTR_TSID, NL80211_ATTR_USER_PRIO, NL80211_ATTR_ADMITTED_TIME, NL80211_ATTR_SMPS_MODE, NL80211_ATTR_OPER_CLASS, NL80211_ATTR_MAC_MASK, NL80211_ATTR_WIPHY_SELF_MANAGED_REG, NL80211_ATTR_EXT_FEATURES, NL80211_ATTR_SURVEY_RADIO_STATS, NL80211_ATTR_NETNS_FD, NL80211_ATTR_SCHED_SCAN_DELAY, NL80211_ATTR_REG_INDOOR, NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS, NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL, NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS, NL80211_ATTR_SCHED_SCAN_PLANS, NL80211_ATTR_PBSS, NL80211_ATTR_BSS_SELECT, NL80211_ATTR_STA_SUPPORT_P2P_PS, NL80211_ATTR_PAD, NL80211_ATTR_IFTYPE_EXT_CAPA, NL80211_ATTR_MU_MIMO_GROUP_DATA, NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR, NL80211_ATTR_SCAN_START_TIME_TSF, NL80211_ATTR_SCAN_START_TIME_TSF_BSSID, NL80211_ATTR_MEASUREMENT_DURATION, NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY, NL80211_ATTR_MESH_PEER_AID, NL80211_ATTR_NAN_MASTER_PREF, NL80211_ATTR_NAN_DUAL, NL80211_ATTR_NAN_FUNC, NL80211_ATTR_NAN_MATCH, __NL80211_ATTR_AFTER_LAST, NUM_NL80211_ATTR = __NL80211_ATTR_AFTER_LAST, NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 }

enum	nl80211_iftype { NL80211_IFTYPE_UNSPECIFIED, NL80211_IFTYPE_ADHOC, NL80211_IFTYPE_STATION, NL80211_IFTYPE_AP, NL80211_IFTYPE_AP_VLAN, NL80211_IFTYPE_WDS, NL80211_IFTYPE_MONITOR, NL80211_IFTYPE_MESH_POINT, NL80211_IFTYPE_P2P_CLIENT, NL80211_IFTYPE_P2P_GO, NL80211_IFTYPE_P2P_DEVICE, NL80211_IFTYPE_OCB, NL80211_IFTYPE_NAN, NUM_NL80211_IFTYPES, NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1 }

enum	nl80211_sta_flags { __NL80211_STA_FLAG_INVALID, NL80211_STA_FLAG_AUTHORIZED, NL80211_STA_FLAG_SHORT_PREAMBLE, NL80211_STA_FLAG_WME, NL80211_STA_FLAG_MFP, NL80211_STA_FLAG_AUTHENTICATED, NL80211_STA_FLAG_TDLS_PEER, NL80211_STA_FLAG_ASSOCIATED, __NL80211_STA_FLAG_AFTER_LAST, NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1 }

enum	nl80211_sta_p2p_ps_status { NL80211_P2P_PS_UNSUPPORTED = 0, NL80211_P2P_PS_SUPPORTED, NUM_NL80211_P2P_PS_STATUS }

enum	nl80211_rate_info { __NL80211_RATE_INFO_INVALID, NL80211_RATE_INFO_BITRATE, NL80211_RATE_INFO_MCS, NL80211_RATE_INFO_40_MHZ_WIDTH, NL80211_RATE_INFO_SHORT_GI, NL80211_RATE_INFO_BITRATE32, NL80211_RATE_INFO_VHT_MCS, NL80211_RATE_INFO_VHT_NSS, NL80211_RATE_INFO_80_MHZ_WIDTH, NL80211_RATE_INFO_80P80_MHZ_WIDTH, NL80211_RATE_INFO_160_MHZ_WIDTH, NL80211_RATE_INFO_10_MHZ_WIDTH, NL80211_RATE_INFO_5_MHZ_WIDTH, __NL80211_RATE_INFO_AFTER_LAST, NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1 }

enum	nl80211_sta_bss_param { __NL80211_STA_BSS_PARAM_INVALID, NL80211_STA_BSS_PARAM_CTS_PROT, NL80211_STA_BSS_PARAM_SHORT_PREAMBLE, NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME, NL80211_STA_BSS_PARAM_DTIM_PERIOD, NL80211_STA_BSS_PARAM_BEACON_INTERVAL, __NL80211_STA_BSS_PARAM_AFTER_LAST, NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1 }

enum	nl80211_sta_info { __NL80211_STA_INFO_INVALID, NL80211_STA_INFO_INACTIVE_TIME, NL80211_STA_INFO_RX_BYTES, NL80211_STA_INFO_TX_BYTES, NL80211_STA_INFO_LLID, NL80211_STA_INFO_PLID, NL80211_STA_INFO_PLINK_STATE, NL80211_STA_INFO_SIGNAL, NL80211_STA_INFO_TX_BITRATE, NL80211_STA_INFO_RX_PACKETS, NL80211_STA_INFO_TX_PACKETS, NL80211_STA_INFO_TX_RETRIES, NL80211_STA_INFO_TX_FAILED, NL80211_STA_INFO_SIGNAL_AVG, NL80211_STA_INFO_RX_BITRATE, NL80211_STA_INFO_BSS_PARAM, NL80211_STA_INFO_CONNECTED_TIME, NL80211_STA_INFO_STA_FLAGS, NL80211_STA_INFO_BEACON_LOSS, NL80211_STA_INFO_T_OFFSET, NL80211_STA_INFO_LOCAL_PM, NL80211_STA_INFO_PEER_PM, NL80211_STA_INFO_NONPEER_PM, NL80211_STA_INFO_RX_BYTES64, NL80211_STA_INFO_TX_BYTES64, NL80211_STA_INFO_CHAIN_SIGNAL, NL80211_STA_INFO_CHAIN_SIGNAL_AVG, NL80211_STA_INFO_EXPECTED_THROUGHPUT, NL80211_STA_INFO_RX_DROP_MISC, NL80211_STA_INFO_BEACON_RX, NL80211_STA_INFO_BEACON_SIGNAL_AVG, NL80211_STA_INFO_TID_STATS, NL80211_STA_INFO_RX_DURATION, NL80211_STA_INFO_PAD, __NL80211_STA_INFO_AFTER_LAST, NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1 }

enum	nl80211_tid_stats { __NL80211_TID_STATS_INVALID, NL80211_TID_STATS_RX_MSDU, NL80211_TID_STATS_TX_MSDU, NL80211_TID_STATS_TX_MSDU_RETRIES, NL80211_TID_STATS_TX_MSDU_FAILED, NL80211_TID_STATS_PAD, NUM_NL80211_TID_STATS, NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 1 }

enum	nl80211_mpath_flags { NL80211_MPATH_FLAG_ACTIVE = 1<<0, NL80211_MPATH_FLAG_RESOLVING = 1<<1, NL80211_MPATH_FLAG_SN_VALID = 1<<2, NL80211_MPATH_FLAG_FIXED = 1<<3, NL80211_MPATH_FLAG_RESOLVED = 1<<4 }

enum	nl80211_mpath_info { __NL80211_MPATH_INFO_INVALID, NL80211_MPATH_INFO_FRAME_QLEN, NL80211_MPATH_INFO_SN, NL80211_MPATH_INFO_METRIC, NL80211_MPATH_INFO_EXPTIME, NL80211_MPATH_INFO_FLAGS, NL80211_MPATH_INFO_DISCOVERY_TIMEOUT, NL80211_MPATH_INFO_DISCOVERY_RETRIES, __NL80211_MPATH_INFO_AFTER_LAST, NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1 }

enum	nl80211_band_attr { __NL80211_BAND_ATTR_INVALID, NL80211_BAND_ATTR_FREQS, NL80211_BAND_ATTR_RATES, NL80211_BAND_ATTR_HT_MCS_SET, NL80211_BAND_ATTR_HT_CAPA, NL80211_BAND_ATTR_HT_AMPDU_FACTOR, NL80211_BAND_ATTR_HT_AMPDU_DENSITY, NL80211_BAND_ATTR_VHT_MCS_SET, NL80211_BAND_ATTR_VHT_CAPA, __NL80211_BAND_ATTR_AFTER_LAST, NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 }

enum	nl80211_frequency_attr { __NL80211_FREQUENCY_ATTR_INVALID, NL80211_FREQUENCY_ATTR_FREQ, NL80211_FREQUENCY_ATTR_DISABLED, NL80211_FREQUENCY_ATTR_NO_IR, __NL80211_FREQUENCY_ATTR_NO_IBSS, NL80211_FREQUENCY_ATTR_RADAR, NL80211_FREQUENCY_ATTR_MAX_TX_POWER, NL80211_FREQUENCY_ATTR_DFS_STATE, NL80211_FREQUENCY_ATTR_DFS_TIME, NL80211_FREQUENCY_ATTR_NO_HT40_MINUS, NL80211_FREQUENCY_ATTR_NO_HT40_PLUS, NL80211_FREQUENCY_ATTR_NO_80MHZ, NL80211_FREQUENCY_ATTR_NO_160MHZ, NL80211_FREQUENCY_ATTR_DFS_CAC_TIME, NL80211_FREQUENCY_ATTR_INDOOR_ONLY, NL80211_FREQUENCY_ATTR_IR_CONCURRENT, NL80211_FREQUENCY_ATTR_NO_20MHZ, NL80211_FREQUENCY_ATTR_NO_10MHZ, __NL80211_FREQUENCY_ATTR_AFTER_LAST, NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1 }

enum	nl80211_bitrate_attr { __NL80211_BITRATE_ATTR_INVALID, NL80211_BITRATE_ATTR_RATE, NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE, __NL80211_BITRATE_ATTR_AFTER_LAST, NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1 }

enum	nl80211_reg_initiator { NL80211_REGDOM_SET_BY_CORE, NL80211_REGDOM_SET_BY_USER, NL80211_REGDOM_SET_BY_DRIVER, NL80211_REGDOM_SET_BY_COUNTRY_IE }

enum	nl80211_reg_type { NL80211_REGDOM_TYPE_COUNTRY, NL80211_REGDOM_TYPE_WORLD, NL80211_REGDOM_TYPE_CUSTOM_WORLD, NL80211_REGDOM_TYPE_INTERSECTION }

enum	nl80211_reg_rule_attr { __NL80211_REG_RULE_ATTR_INVALID, NL80211_ATTR_REG_RULE_FLAGS, NL80211_ATTR_FREQ_RANGE_START, NL80211_ATTR_FREQ_RANGE_END, NL80211_ATTR_FREQ_RANGE_MAX_BW, NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN, NL80211_ATTR_POWER_RULE_MAX_EIRP, NL80211_ATTR_DFS_CAC_TIME, __NL80211_REG_RULE_ATTR_AFTER_LAST, NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1 }

enum	nl80211_sched_scan_match_attr { __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID, NL80211_SCHED_SCAN_MATCH_ATTR_SSID, NL80211_SCHED_SCAN_MATCH_ATTR_RSSI, __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, NL80211_SCHED_SCAN_MATCH_ATTR_MAX }

enum	nl80211_reg_rule_flags { NL80211_RRF_NO_OFDM = 1<<0, NL80211_RRF_NO_CCK = 1<<1, NL80211_RRF_NO_INDOOR = 1<<2, NL80211_RRF_NO_OUTDOOR = 1<<3, NL80211_RRF_DFS = 1<<4, NL80211_RRF_PTP_ONLY = 1<<5, NL80211_RRF_PTMP_ONLY = 1<<6, NL80211_RRF_NO_IR = 1<<7, __NL80211_RRF_NO_IBSS = 1<<8, NL80211_RRF_AUTO_BW = 1<<11, NL80211_RRF_IR_CONCURRENT = 1<<12, NL80211_RRF_NO_HT40MINUS = 1<<13, NL80211_RRF_NO_HT40PLUS = 1<<14, NL80211_RRF_NO_80MHZ = 1<<15, NL80211_RRF_NO_160MHZ = 1<<16 }

enum	nl80211_dfs_regions { NL80211_DFS_UNSET = 0, NL80211_DFS_FCC = 1, NL80211_DFS_ETSI = 2, NL80211_DFS_JP = 3 }

enum	nl80211_user_reg_hint_type { NL80211_USER_REG_HINT_USER = 0, NL80211_USER_REG_HINT_CELL_BASE = 1, NL80211_USER_REG_HINT_INDOOR = 2 }

enum	nl80211_survey_info { __NL80211_SURVEY_INFO_INVALID, NL80211_SURVEY_INFO_FREQUENCY, NL80211_SURVEY_INFO_NOISE, NL80211_SURVEY_INFO_IN_USE, NL80211_SURVEY_INFO_TIME, NL80211_SURVEY_INFO_TIME_BUSY, NL80211_SURVEY_INFO_TIME_EXT_BUSY, NL80211_SURVEY_INFO_TIME_RX, NL80211_SURVEY_INFO_TIME_TX, NL80211_SURVEY_INFO_TIME_SCAN, NL80211_SURVEY_INFO_PAD, __NL80211_SURVEY_INFO_AFTER_LAST, NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1 }

enum	nl80211_mntr_flags { __NL80211_MNTR_FLAG_INVALID, NL80211_MNTR_FLAG_FCSFAIL, NL80211_MNTR_FLAG_PLCPFAIL, NL80211_MNTR_FLAG_CONTROL, NL80211_MNTR_FLAG_OTHER_BSS, NL80211_MNTR_FLAG_COOK_FRAMES, NL80211_MNTR_FLAG_ACTIVE, __NL80211_MNTR_FLAG_AFTER_LAST, NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1 }

enum	nl80211_mesh_power_mode { NL80211_MESH_POWER_UNKNOWN, NL80211_MESH_POWER_ACTIVE, NL80211_MESH_POWER_LIGHT_SLEEP, NL80211_MESH_POWER_DEEP_SLEEP, __NL80211_MESH_POWER_AFTER_LAST, NL80211_MESH_POWER_MAX = __NL80211_MESH_POWER_AFTER_LAST - 1 }

enum	nl80211_meshconf_params { __NL80211_MESHCONF_INVALID, NL80211_MESHCONF_RETRY_TIMEOUT, NL80211_MESHCONF_CONFIRM_TIMEOUT, NL80211_MESHCONF_HOLDING_TIMEOUT, NL80211_MESHCONF_MAX_PEER_LINKS, NL80211_MESHCONF_MAX_RETRIES, NL80211_MESHCONF_TTL, NL80211_MESHCONF_AUTO_OPEN_PLINKS, NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, NL80211_MESHCONF_PATH_REFRESH_TIME, NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, NL80211_MESHCONF_HWMP_ROOTMODE, NL80211_MESHCONF_ELEMENT_TTL, NL80211_MESHCONF_HWMP_RANN_INTERVAL, NL80211_MESHCONF_GATE_ANNOUNCEMENTS, NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL, NL80211_MESHCONF_FORWARDING, NL80211_MESHCONF_RSSI_THRESHOLD, NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR, NL80211_MESHCONF_HT_OPMODE, NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, NL80211_MESHCONF_HWMP_ROOT_INTERVAL, NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, NL80211_MESHCONF_POWER_MODE, NL80211_MESHCONF_AWAKE_WINDOW, NL80211_MESHCONF_PLINK_TIMEOUT, __NL80211_MESHCONF_ATTR_AFTER_LAST, NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1 }

enum	nl80211_mesh_setup_params { __NL80211_MESH_SETUP_INVALID, NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL, NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC, NL80211_MESH_SETUP_IE, NL80211_MESH_SETUP_USERSPACE_AUTH, NL80211_MESH_SETUP_USERSPACE_AMPE, NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC, NL80211_MESH_SETUP_USERSPACE_MPM, NL80211_MESH_SETUP_AUTH_PROTOCOL, __NL80211_MESH_SETUP_ATTR_AFTER_LAST, NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1 }

enum	nl80211_txq_attr { __NL80211_TXQ_ATTR_INVALID, NL80211_TXQ_ATTR_AC, NL80211_TXQ_ATTR_TXOP, NL80211_TXQ_ATTR_CWMIN, NL80211_TXQ_ATTR_CWMAX, NL80211_TXQ_ATTR_AIFS, __NL80211_TXQ_ATTR_AFTER_LAST, NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1 }

enum	nl80211_ac { NL80211_AC_VO, NL80211_AC_VI, NL80211_AC_BE, NL80211_AC_BK, NL80211_NUM_ACS }

enum	nl80211_channel_type { NL80211_CHAN_NO_HT, NL80211_CHAN_HT20, NL80211_CHAN_HT40MINUS, NL80211_CHAN_HT40PLUS }

enum	nl80211_chan_width { NL80211_CHAN_WIDTH_20_NOHT, NL80211_CHAN_WIDTH_20, NL80211_CHAN_WIDTH_40, NL80211_CHAN_WIDTH_80, NL80211_CHAN_WIDTH_80P80, NL80211_CHAN_WIDTH_160, NL80211_CHAN_WIDTH_5, NL80211_CHAN_WIDTH_10 }

enum	nl80211_bss_scan_width { NL80211_BSS_CHAN_WIDTH_20, NL80211_BSS_CHAN_WIDTH_10, NL80211_BSS_CHAN_WIDTH_5 }

enum	nl80211_bss { __NL80211_BSS_INVALID, NL80211_BSS_BSSID, NL80211_BSS_FREQUENCY, NL80211_BSS_TSF, NL80211_BSS_BEACON_INTERVAL, NL80211_BSS_CAPABILITY, NL80211_BSS_INFORMATION_ELEMENTS, NL80211_BSS_SIGNAL_MBM, NL80211_BSS_SIGNAL_UNSPEC, NL80211_BSS_STATUS, NL80211_BSS_SEEN_MS_AGO, NL80211_BSS_BEACON_IES, NL80211_BSS_CHAN_WIDTH, NL80211_BSS_BEACON_TSF, NL80211_BSS_PRESP_DATA, NL80211_BSS_LAST_SEEN_BOOTTIME, NL80211_BSS_PAD, NL80211_BSS_PARENT_TSF, NL80211_BSS_PARENT_BSSID, __NL80211_BSS_AFTER_LAST, NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1 }

enum	nl80211_bss_status { NL80211_BSS_STATUS_AUTHENTICATED, NL80211_BSS_STATUS_ASSOCIATED, NL80211_BSS_STATUS_IBSS_JOINED }

enum	nl80211_auth_type { NL80211_AUTHTYPE_OPEN_SYSTEM, NL80211_AUTHTYPE_SHARED_KEY, NL80211_AUTHTYPE_FT, NL80211_AUTHTYPE_NETWORK_EAP, NL80211_AUTHTYPE_SAE, __NL80211_AUTHTYPE_NUM, NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1, NL80211_AUTHTYPE_AUTOMATIC }

enum	nl80211_key_type { NL80211_KEYTYPE_GROUP, NL80211_KEYTYPE_PAIRWISE, NL80211_KEYTYPE_PEERKEY, NUM_NL80211_KEYTYPES }

enum	nl80211_mfp { NL80211_MFP_NO, NL80211_MFP_REQUIRED }

enum	nl80211_wpa_versions { NL80211_WPA_VERSION_1 = 1 << 0, NL80211_WPA_VERSION_2 = 1 << 1 }

enum	nl80211_key_default_types { __NL80211_KEY_DEFAULT_TYPE_INVALID, NL80211_KEY_DEFAULT_TYPE_UNICAST, NL80211_KEY_DEFAULT_TYPE_MULTICAST, NUM_NL80211_KEY_DEFAULT_TYPES }

enum	nl80211_key_attributes { __NL80211_KEY_INVALID, NL80211_KEY_DATA, NL80211_KEY_IDX, NL80211_KEY_CIPHER, NL80211_KEY_SEQ, NL80211_KEY_DEFAULT, NL80211_KEY_DEFAULT_MGMT, NL80211_KEY_TYPE, NL80211_KEY_DEFAULT_TYPES, __NL80211_KEY_AFTER_LAST, NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1 }

enum	nl80211_tx_rate_attributes { __NL80211_TXRATE_INVALID, NL80211_TXRATE_LEGACY, NL80211_TXRATE_HT, NL80211_TXRATE_VHT, NL80211_TXRATE_GI, __NL80211_TXRATE_AFTER_LAST, NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1 }

enum	nl80211_txrate_gi { NL80211_TXRATE_DEFAULT_GI, NL80211_TXRATE_FORCE_SGI, NL80211_TXRATE_FORCE_LGI }

enum	nl80211_band { NL80211_BAND_2GHZ, NL80211_BAND_5GHZ, NL80211_BAND_60GHZ, NUM_NL80211_BANDS }

enum	nl80211_ps_state { NL80211_PS_DISABLED, NL80211_PS_ENABLED }

enum	nl80211_attr_cqm { __NL80211_ATTR_CQM_INVALID, NL80211_ATTR_CQM_RSSI_THOLD, NL80211_ATTR_CQM_RSSI_HYST, NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT, NL80211_ATTR_CQM_PKT_LOSS_EVENT, NL80211_ATTR_CQM_TXE_RATE, NL80211_ATTR_CQM_TXE_PKTS, NL80211_ATTR_CQM_TXE_INTVL, NL80211_ATTR_CQM_BEACON_LOSS_EVENT, __NL80211_ATTR_CQM_AFTER_LAST, NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1 }

enum	nl80211_cqm_rssi_threshold_event { NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, NL80211_CQM_RSSI_BEACON_LOSS_EVENT }

enum	nl80211_tx_power_setting { NL80211_TX_POWER_AUTOMATIC, NL80211_TX_POWER_LIMITED, NL80211_TX_POWER_FIXED }

enum	nl80211_packet_pattern_attr { __NL80211_PKTPAT_INVALID, NL80211_PKTPAT_MASK, NL80211_PKTPAT_PATTERN, NL80211_PKTPAT_OFFSET, NUM_NL80211_PKTPAT, MAX_NL80211_PKTPAT = NUM_NL80211_PKTPAT - 1 }

enum	nl80211_wowlan_triggers { __NL80211_WOWLAN_TRIG_INVALID, NL80211_WOWLAN_TRIG_ANY, NL80211_WOWLAN_TRIG_DISCONNECT, NL80211_WOWLAN_TRIG_MAGIC_PKT, NL80211_WOWLAN_TRIG_PKT_PATTERN, NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED, NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE, NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST, NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE, NL80211_WOWLAN_TRIG_RFKILL_RELEASE, NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211, NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN, NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023, NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN, NL80211_WOWLAN_TRIG_TCP_CONNECTION, NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH, NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST, NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS, NL80211_WOWLAN_TRIG_NET_DETECT, NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS, NUM_NL80211_WOWLAN_TRIG, MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1 }

enum	nl80211_wowlan_tcp_attrs { __NL80211_WOWLAN_TCP_INVALID, NL80211_WOWLAN_TCP_SRC_IPV4, NL80211_WOWLAN_TCP_DST_IPV4, NL80211_WOWLAN_TCP_DST_MAC, NL80211_WOWLAN_TCP_SRC_PORT, NL80211_WOWLAN_TCP_DST_PORT, NL80211_WOWLAN_TCP_DATA_PAYLOAD, NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ, NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN, NL80211_WOWLAN_TCP_DATA_INTERVAL, NL80211_WOWLAN_TCP_WAKE_PAYLOAD, NL80211_WOWLAN_TCP_WAKE_MASK, NUM_NL80211_WOWLAN_TCP, MAX_NL80211_WOWLAN_TCP = NUM_NL80211_WOWLAN_TCP - 1 }

enum	nl80211_attr_coalesce_rule { __NL80211_COALESCE_RULE_INVALID, NL80211_ATTR_COALESCE_RULE_DELAY, NL80211_ATTR_COALESCE_RULE_CONDITION, NL80211_ATTR_COALESCE_RULE_PKT_PATTERN, NUM_NL80211_ATTR_COALESCE_RULE, NL80211_ATTR_COALESCE_RULE_MAX = NUM_NL80211_ATTR_COALESCE_RULE - 1 }

enum	nl80211_coalesce_condition { NL80211_COALESCE_CONDITION_MATCH, NL80211_COALESCE_CONDITION_NO_MATCH }

enum	nl80211_iface_limit_attrs { NL80211_IFACE_LIMIT_UNSPEC, NL80211_IFACE_LIMIT_MAX, NL80211_IFACE_LIMIT_TYPES, NUM_NL80211_IFACE_LIMIT, MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1 }

enum	nl80211_if_combination_attrs { NL80211_IFACE_COMB_UNSPEC, NL80211_IFACE_COMB_LIMITS, NL80211_IFACE_COMB_MAXNUM, NL80211_IFACE_COMB_STA_AP_BI_MATCH, NL80211_IFACE_COMB_NUM_CHANNELS, NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS, NL80211_IFACE_COMB_RADAR_DETECT_REGIONS, NUM_NL80211_IFACE_COMB, MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1 }

enum	nl80211_plink_state { NL80211_PLINK_LISTEN, NL80211_PLINK_OPN_SNT, NL80211_PLINK_OPN_RCVD, NL80211_PLINK_CNF_RCVD, NL80211_PLINK_ESTAB, NL80211_PLINK_HOLDING, NL80211_PLINK_BLOCKED, NUM_NL80211_PLINK_STATES, MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1 }

enum	plink_actions { NL80211_PLINK_ACTION_NO_ACTION, NL80211_PLINK_ACTION_OPEN, NL80211_PLINK_ACTION_BLOCK, NUM_NL80211_PLINK_ACTIONS }

enum	nl80211_rekey_data { __NL80211_REKEY_DATA_INVALID, NL80211_REKEY_DATA_KEK, NL80211_REKEY_DATA_KCK, NL80211_REKEY_DATA_REPLAY_CTR, NUM_NL80211_REKEY_DATA, MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1 }

enum	nl80211_hidden_ssid { NL80211_HIDDEN_SSID_NOT_IN_USE, NL80211_HIDDEN_SSID_ZERO_LEN, NL80211_HIDDEN_SSID_ZERO_CONTENTS }

enum	nl80211_sta_wme_attr { __NL80211_STA_WME_INVALID, NL80211_STA_WME_UAPSD_QUEUES, NL80211_STA_WME_MAX_SP, __NL80211_STA_WME_AFTER_LAST, NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1 }

enum	nl80211_pmksa_candidate_attr { __NL80211_PMKSA_CANDIDATE_INVALID, NL80211_PMKSA_CANDIDATE_INDEX, NL80211_PMKSA_CANDIDATE_BSSID, NL80211_PMKSA_CANDIDATE_PREAUTH, NUM_NL80211_PMKSA_CANDIDATE, MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1 }

enum	nl80211_tdls_operation { NL80211_TDLS_DISCOVERY_REQ, NL80211_TDLS_SETUP, NL80211_TDLS_TEARDOWN, NL80211_TDLS_ENABLE_LINK, NL80211_TDLS_DISABLE_LINK }

enum	nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, NL80211_FEATURE_HT_IBSS = 1 << 1, NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2, NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3, NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4, NL80211_FEATURE_SAE = 1 << 5, NL80211_FEATURE_LOW_PRIORITY_SCAN = 1 << 6, NL80211_FEATURE_SCAN_FLUSH = 1 << 7, NL80211_FEATURE_AP_SCAN = 1 << 8, NL80211_FEATURE_VIF_TXPOWER = 1 << 9, NL80211_FEATURE_NEED_OBSS_SCAN = 1 << 10, NL80211_FEATURE_P2P_GO_CTWIN = 1 << 11, NL80211_FEATURE_P2P_GO_OPPPS = 1 << 12, NL80211_FEATURE_ADVERTISE_CHAN_LIMITS = 1 << 14, NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15, NL80211_FEATURE_USERSPACE_MPM = 1 << 16, NL80211_FEATURE_ACTIVE_MONITOR = 1 << 17, NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE = 1 << 18, NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES = 1 << 19, NL80211_FEATURE_WFA_TPC_IE_IN_PROBES = 1 << 20, NL80211_FEATURE_QUIET = 1 << 21, NL80211_FEATURE_TX_POWER_INSERTION = 1 << 22, NL80211_FEATURE_ACKTO_ESTIMATION = 1 << 23, NL80211_FEATURE_STATIC_SMPS = 1 << 24, NL80211_FEATURE_DYNAMIC_SMPS = 1 << 25, NL80211_FEATURE_SUPPORTS_WMM_ADMISSION = 1 << 26, NL80211_FEATURE_MAC_ON_CREATE = 1 << 27, NL80211_FEATURE_TDLS_CHANNEL_SWITCH = 1 << 28, NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR = 1 << 29, NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR = 1 << 30, NL80211_FEATURE_ND_RANDOM_MAC_ADDR = 1 << 31 }

enum	nl80211_ext_feature_index { NL80211_EXT_FEATURE_VHT_IBSS, NL80211_EXT_FEATURE_RRM, NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER, NL80211_EXT_FEATURE_SCAN_START_TIME, NL80211_EXT_FEATURE_BSS_PARENT_TSF, NL80211_EXT_FEATURE_SET_SCAN_DWELL, NL80211_EXT_FEATURE_BEACON_RATE_LEGACY, NL80211_EXT_FEATURE_BEACON_RATE_HT, NL80211_EXT_FEATURE_BEACON_RATE_VHT, NUM_NL80211_EXT_FEATURES, MAX_NL80211_EXT_FEATURES = NUM_NL80211_EXT_FEATURES - 1 }

enum	nl80211_probe_resp_offload_support_attr { NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS = 1<<0, NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 = 1<<1, NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P = 1<<2, NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U = 1<<3 }

enum	nl80211_connect_failed_reason { NL80211_CONN_FAIL_MAX_CLIENTS, NL80211_CONN_FAIL_BLOCKED_CLIENT }

enum	nl80211_scan_flags { NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, NL80211_SCAN_FLAG_FLUSH = 1<<1, NL80211_SCAN_FLAG_AP = 1<<2, NL80211_SCAN_FLAG_RANDOM_ADDR = 1<<3 }

enum	nl80211_acl_policy { NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED, NL80211_ACL_POLICY_DENY_UNLESS_LISTED }

enum	nl80211_smps_mode { NL80211_SMPS_OFF, NL80211_SMPS_STATIC, NL80211_SMPS_DYNAMIC, __NL80211_SMPS_AFTER_LAST, NL80211_SMPS_MAX = __NL80211_SMPS_AFTER_LAST - 1 }

enum	nl80211_radar_event { NL80211_RADAR_DETECTED, NL80211_RADAR_CAC_FINISHED, NL80211_RADAR_CAC_ABORTED, NL80211_RADAR_NOP_FINISHED }

enum	nl80211_dfs_state { NL80211_DFS_USABLE, NL80211_DFS_UNAVAILABLE, NL80211_DFS_AVAILABLE }

enum	nl80211_protocol_features { NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP = 1 << 0 }

enum	nl80211_crit_proto_id { NL80211_CRIT_PROTO_UNSPEC, NL80211_CRIT_PROTO_DHCP, NL80211_CRIT_PROTO_EAPOL, NL80211_CRIT_PROTO_APIPA, NUM_NL80211_CRIT_PROTO }

enum	nl80211_rxmgmt_flags { NL80211_RXMGMT_FLAG_ANSWERED = 1 << 0 }

enum	nl80211_tdls_peer_capability { NL80211_TDLS_PEER_HT = 1<<0, NL80211_TDLS_PEER_VHT = 1<<1, NL80211_TDLS_PEER_WMM = 1<<2 }

enum	nl80211_sched_scan_plan { __NL80211_SCHED_SCAN_PLAN_INVALID, NL80211_SCHED_SCAN_PLAN_INTERVAL, NL80211_SCHED_SCAN_PLAN_ITERATIONS, __NL80211_SCHED_SCAN_PLAN_AFTER_LAST, NL80211_SCHED_SCAN_PLAN_MAX }

enum	nl80211_bss_select_attr { __NL80211_BSS_SELECT_ATTR_INVALID, NL80211_BSS_SELECT_ATTR_RSSI, NL80211_BSS_SELECT_ATTR_BAND_PREF, NL80211_BSS_SELECT_ATTR_RSSI_ADJUST, __NL80211_BSS_SELECT_ATTR_AFTER_LAST, NL80211_BSS_SELECT_ATTR_MAX = __NL80211_BSS_SELECT_ATTR_AFTER_LAST - 1 }

enum	nl80211_nan_dual_band_conf { NL80211_NAN_BAND_DEFAULT = 1 << 0, NL80211_NAN_BAND_2GHZ = 1 << 1, NL80211_NAN_BAND_5GHZ = 1 << 2 }

enum	nl80211_nan_function_type { NL80211_NAN_FUNC_PUBLISH, NL80211_NAN_FUNC_SUBSCRIBE, NL80211_NAN_FUNC_FOLLOW_UP, __NL80211_NAN_FUNC_TYPE_AFTER_LAST, NL80211_NAN_FUNC_MAX_TYPE = __NL80211_NAN_FUNC_TYPE_AFTER_LAST - 1 }

enum	nl80211_nan_publish_type { NL80211_NAN_SOLICITED_PUBLISH = 1 << 0, NL80211_NAN_UNSOLICITED_PUBLISH = 1 << 1 }

enum	nl80211_nan_func_term_reason { NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST, NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED, NL80211_NAN_FUNC_TERM_REASON_ERROR }

enum	nl80211_nan_func_attributes { __NL80211_NAN_FUNC_INVALID, NL80211_NAN_FUNC_TYPE, NL80211_NAN_FUNC_SERVICE_ID, NL80211_NAN_FUNC_PUBLISH_TYPE, NL80211_NAN_FUNC_PUBLISH_BCAST, NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE, NL80211_NAN_FUNC_FOLLOW_UP_ID, NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID, NL80211_NAN_FUNC_FOLLOW_UP_DEST, NL80211_NAN_FUNC_CLOSE_RANGE, NL80211_NAN_FUNC_TTL, NL80211_NAN_FUNC_SERVICE_INFO, NL80211_NAN_FUNC_SRF, NL80211_NAN_FUNC_RX_MATCH_FILTER, NL80211_NAN_FUNC_TX_MATCH_FILTER, NL80211_NAN_FUNC_INSTANCE_ID, NL80211_NAN_FUNC_TERM_REASON, NUM_NL80211_NAN_FUNC_ATTR, NL80211_NAN_FUNC_ATTR_MAX = NUM_NL80211_NAN_FUNC_ATTR - 1 }

enum	nl80211_nan_srf_attributes { __NL80211_NAN_SRF_INVALID, NL80211_NAN_SRF_INCLUDE, NL80211_NAN_SRF_BF, NL80211_NAN_SRF_BF_IDX, NL80211_NAN_SRF_MAC_ADDRS, NUM_NL80211_NAN_SRF_ATTR, NL80211_NAN_SRF_ATTR_MAX = NUM_NL80211_NAN_SRF_ATTR - 1 }

enum	nl80211_nan_match_attributes { __NL80211_NAN_MATCH_INVALID, NL80211_NAN_MATCH_FUNC_LOCAL, NL80211_NAN_MATCH_FUNC_PEER, NUM_NL80211_NAN_MATCH_ATTR, NL80211_NAN_MATCH_ATTR_MAX = NUM_NL80211_NAN_MATCH_ATTR - 1 }

Functions
struct nl80211_sta_flag_update	__attribute__ ((packed))

Variables
__u32	mask

__u32	set

enum nl80211_rate_info	__attribute__

__u32	max_patterns

__u32	min_pattern_len

__u32	max_pattern_len

__u32	max_pkt_offset

__u32	max_rules

struct nl80211_pattern_support	pat

__u32	max_delay

__u8	band

__s8	delta

Macro Definition Documentation

◆ __NL80211_WOWLAN_PKTPAT_INVALID

#define __NL80211_WOWLAN_PKTPAT_INVALID __NL80211_PKTPAT_INVALID

Definition at line 3973 of file nl80211-new.h.

◆ MAX_NL80211_WOWLAN_PKTPAT

#define MAX_NL80211_WOWLAN_PKTPAT MAX_NL80211_PKTPAT

Definition at line 3978 of file nl80211-new.h.

◆ NL80211_ATTR_AKM_SUITES

#define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES

Definition at line 2385 of file nl80211-new.h.

◆ NL80211_ATTR_AUTH_TYPE

#define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE

Definition at line 2380 of file nl80211-new.h.

◆ NL80211_ATTR_BSS_BASIC_RATES

#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES

Definition at line 2370 of file nl80211-new.h.

◆ NL80211_ATTR_CIPHER_SUITE_GROUP

#define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP

Definition at line 2383 of file nl80211-new.h.

◆ NL80211_ATTR_CIPHER_SUITES_PAIRWISE

#define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE

Definition at line 2382 of file nl80211-new.h.

◆ NL80211_ATTR_FEATURE_FLAGS [1/2]

#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS

Definition at line 2388 of file nl80211-new.h.

◆ NL80211_ATTR_FEATURE_FLAGS [2/2]

#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS

Definition at line 2388 of file nl80211-new.h.

◆ NL80211_ATTR_FRAME

#define NL80211_ATTR_FRAME NL80211_ATTR_FRAME

Definition at line 2378 of file nl80211-new.h.

◆ NL80211_ATTR_HT_CAPABILITY

#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY

Definition at line 2369 of file nl80211-new.h.

◆ NL80211_ATTR_IE

#define NL80211_ATTR_IE NL80211_ATTR_IE

Definition at line 2375 of file nl80211-new.h.

◆ NL80211_ATTR_IFACE_SOCKET_OWNER

#define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER

Definition at line 2362 of file nl80211-new.h.

◆ NL80211_ATTR_KEY

#define NL80211_ATTR_KEY NL80211_ATTR_KEY

Definition at line 2386 of file nl80211-new.h.

◆ NL80211_ATTR_KEYS

#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS

Definition at line 2387 of file nl80211-new.h.

◆ NL80211_ATTR_MESH_PARAMS

#define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG

Definition at line 2361 of file nl80211-new.h.

◆ NL80211_ATTR_MGMT_SUBTYPE

#define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE

Definition at line 2374 of file nl80211-new.h.

◆ NL80211_ATTR_REASON_CODE

#define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE

Definition at line 2381 of file nl80211-new.h.

◆ NL80211_ATTR_REG_INITIATOR

#define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR

Definition at line 2376 of file nl80211-new.h.

◆ NL80211_ATTR_REG_TYPE

#define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE

Definition at line 2377 of file nl80211-new.h.

◆ NL80211_ATTR_SCAN_GENERATION

#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION

Definition at line 2360 of file nl80211-new.h.

◆ NL80211_ATTR_SCHED_SCAN_MATCH_SSID

#define NL80211_ATTR_SCHED_SCAN_MATCH_SSID NL80211_SCHED_SCAN_MATCH_ATTR_SSID

Definition at line 3060 of file nl80211-new.h.

◆ NL80211_ATTR_SSID

#define NL80211_ATTR_SSID NL80211_ATTR_SSID

Definition at line 2379 of file nl80211-new.h.

◆ NL80211_ATTR_WIPHY_CHANNEL_TYPE

#define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE

Definition at line 2373 of file nl80211-new.h.

◆ NL80211_ATTR_WIPHY_FREQ

#define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ

Definition at line 2372 of file nl80211-new.h.

◆ NL80211_ATTR_WIPHY_TXQ_PARAMS

#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS

Definition at line 2371 of file nl80211-new.h.

◆ NL80211_ATTR_WPA_VERSIONS

#define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS

Definition at line 2384 of file nl80211-new.h.

◆ NL80211_BAND_ATTR_HT_CAPA

#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA

Definition at line 2829 of file nl80211-new.h.

◆ NL80211_CMD_ASSOCIATE

#define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE

Definition at line 1100 of file nl80211-new.h.

◆ NL80211_CMD_AUTHENTICATE

#define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE

Definition at line 1099 of file nl80211-new.h.

◆ NL80211_CMD_CONNECT

#define NL80211_CMD_CONNECT NL80211_CMD_CONNECT

Definition at line 2368 of file nl80211-new.h.

◆ NL80211_CMD_DEAUTHENTICATE

#define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE

Definition at line 1101 of file nl80211-new.h.

◆ NL80211_CMD_DISASSOCIATE

#define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE

Definition at line 1102 of file nl80211-new.h.

◆ NL80211_CMD_GET_MESH_PARAMS

#define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG

Definition at line 1108 of file nl80211-new.h.

◆ NL80211_CMD_REG_BEACON_HINT

#define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT

Definition at line 1103 of file nl80211-new.h.

◆ NL80211_CMD_REG_CHANGE

#define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE

Definition at line 1098 of file nl80211-new.h.

◆ NL80211_CMD_SET_BSS

#define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS

Definition at line 1096 of file nl80211-new.h.

◆ NL80211_CMD_SET_MESH_PARAMS

#define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG

Definition at line 1109 of file nl80211-new.h.

◆ NL80211_CMD_SET_MGMT_EXTRA_IE

#define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE

Definition at line 1097 of file nl80211-new.h.

◆ NL80211_CQM_TXE_MAX_INTVL

#define NL80211_CQM_TXE_MAX_INTVL 1800

Definition at line 2407 of file nl80211-new.h.

◆ NL80211_CRIT_PROTO_MAX_DURATION

#define NL80211_CRIT_PROTO_MAX_DURATION 5000 /* msec */

Definition at line 4840 of file nl80211-new.h.

◆ NL80211_FREQUENCY_ATTR_GO_CONCURRENT

#define NL80211_FREQUENCY_ATTR_GO_CONCURRENT NL80211_FREQUENCY_ATTR_IR_CONCURRENT

Definition at line 2918 of file nl80211-new.h.

◆ NL80211_FREQUENCY_ATTR_MAX_TX_POWER

#define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER

Definition at line 2914 of file nl80211-new.h.

◆ NL80211_FREQUENCY_ATTR_NO_IBSS

#define NL80211_FREQUENCY_ATTR_NO_IBSS NL80211_FREQUENCY_ATTR_NO_IR

Definition at line 2916 of file nl80211-new.h.

◆ NL80211_FREQUENCY_ATTR_NO_IR

#define NL80211_FREQUENCY_ATTR_NO_IR NL80211_FREQUENCY_ATTR_NO_IR

Definition at line 2917 of file nl80211-new.h.

◆ NL80211_FREQUENCY_ATTR_PASSIVE_SCAN

#define NL80211_FREQUENCY_ATTR_PASSIVE_SCAN NL80211_FREQUENCY_ATTR_NO_IR

Definition at line 2915 of file nl80211-new.h.

◆ NL80211_GENL_NAME

#define NL80211_GENL_NAME "nl80211"

Definition at line 57 of file nl80211-new.h.

◆ NL80211_HT_CAPABILITY_LEN

#define NL80211_HT_CAPABILITY_LEN 26

Definition at line 2396 of file nl80211-new.h.

◆ NL80211_KCK_LEN

#define NL80211_KCK_LEN 16

Definition at line 4386 of file nl80211-new.h.

◆ NL80211_KEK_LEN

#define NL80211_KEK_LEN 16

Definition at line 4387 of file nl80211-new.h.

◆ NL80211_MAX_NR_AKM_SUITES

#define NL80211_MAX_NR_AKM_SUITES 2

Definition at line 2400 of file nl80211-new.h.

◆ NL80211_MAX_NR_CIPHER_SUITES

#define NL80211_MAX_NR_CIPHER_SUITES 5

Definition at line 2399 of file nl80211-new.h.

◆ NL80211_MAX_SUPP_HT_RATES

#define NL80211_MAX_SUPP_HT_RATES 77

Definition at line 2391 of file nl80211-new.h.

◆ NL80211_MAX_SUPP_RATES

#define NL80211_MAX_SUPP_RATES 32

Definition at line 2390 of file nl80211-new.h.

◆ NL80211_MAX_SUPP_REG_RULES

#define NL80211_MAX_SUPP_REG_RULES 64

Definition at line 2392 of file nl80211-new.h.

◆ NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE

#define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE

Definition at line 1110 of file nl80211-new.h.

◆ NL80211_MIN_REMAIN_ON_CHANNEL_TIME

#define NL80211_MIN_REMAIN_ON_CHANNEL_TIME 10

Definition at line 2402 of file nl80211-new.h.

◆ NL80211_MULTICAST_GROUP_CONFIG

#define NL80211_MULTICAST_GROUP_CONFIG "config"

Definition at line 59 of file nl80211-new.h.

◆ NL80211_MULTICAST_GROUP_MLME

#define NL80211_MULTICAST_GROUP_MLME "mlme"

Definition at line 62 of file nl80211-new.h.

◆ NL80211_MULTICAST_GROUP_NAN

#define NL80211_MULTICAST_GROUP_NAN "nan"

Definition at line 64 of file nl80211-new.h.

◆ NL80211_MULTICAST_GROUP_REG

#define NL80211_MULTICAST_GROUP_REG "regulatory"

Definition at line 61 of file nl80211-new.h.

◆ NL80211_MULTICAST_GROUP_SCAN

#define NL80211_MULTICAST_GROUP_SCAN "scan"

Definition at line 60 of file nl80211-new.h.

◆ NL80211_MULTICAST_GROUP_TESTMODE

#define NL80211_MULTICAST_GROUP_TESTMODE "testmode"

Definition at line 65 of file nl80211-new.h.

◆ NL80211_MULTICAST_GROUP_VENDOR

#define NL80211_MULTICAST_GROUP_VENDOR "vendor"

Definition at line 63 of file nl80211-new.h.

◆ NL80211_NAN_FUNC_SERVICE_ID_LEN

#define NL80211_NAN_FUNC_SERVICE_ID_LEN 6

Definition at line 5019 of file nl80211-new.h.

◆ NL80211_NAN_FUNC_SERVICE_SPEC_INFO_MAX_LEN

#define NL80211_NAN_FUNC_SERVICE_SPEC_INFO_MAX_LEN 0xff

Definition at line 5020 of file nl80211-new.h.

◆ NL80211_NAN_FUNC_SRF_MAX_LEN

#define NL80211_NAN_FUNC_SRF_MAX_LEN 0xff

Definition at line 5021 of file nl80211-new.h.

◆ NL80211_REPLAY_CTR_LEN

#define NL80211_REPLAY_CTR_LEN 8

Definition at line 4388 of file nl80211-new.h.

◆ NL80211_RRF_GO_CONCURRENT

#define NL80211_RRF_GO_CONCURRENT NL80211_RRF_IR_CONCURRENT

Definition at line 3107 of file nl80211-new.h.

◆ NL80211_RRF_NO_HT40

#define NL80211_RRF_NO_HT40

Value:

(NL80211_RRF_NO_HT40MINUS |\

NL80211_RRF_NO_HT40PLUS)

NL80211_RRF_NO_HT40MINUS

Definition: nl80211-new.h:3096

Definition at line 3105 of file nl80211-new.h.

◆ NL80211_RRF_NO_IBSS

#define NL80211_RRF_NO_IBSS NL80211_RRF_NO_IR

Definition at line 3103 of file nl80211-new.h.

◆ NL80211_RRF_NO_IR

#define NL80211_RRF_NO_IR NL80211_RRF_NO_IR

Definition at line 3104 of file nl80211-new.h.

◆ NL80211_RRF_NO_IR_ALL

#define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS)

Definition at line 3110 of file nl80211-new.h.

◆ NL80211_RRF_PASSIVE_SCAN

#define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR

Definition at line 3102 of file nl80211-new.h.

◆ NL80211_SCAN_RSSI_THOLD_OFF

#define NL80211_SCAN_RSSI_THOLD_OFF -300

Definition at line 2405 of file nl80211-new.h.

◆ NL80211_STA_FLAG_MAX_OLD_API

#define NL80211_STA_FLAG_MAX_OLD_API NL80211_STA_FLAG_TDLS_PEER

Definition at line 2511 of file nl80211-new.h.

◆ NL80211_SURVEY_INFO_CHANNEL_TIME

#define NL80211_SURVEY_INFO_CHANNEL_TIME NL80211_SURVEY_INFO_TIME

Definition at line 3196 of file nl80211-new.h.

◆ NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY

#define NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY NL80211_SURVEY_INFO_TIME_BUSY

Definition at line 3197 of file nl80211-new.h.

◆ NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY

#define NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY NL80211_SURVEY_INFO_TIME_EXT_BUSY

Definition at line 3198 of file nl80211-new.h.

◆ NL80211_SURVEY_INFO_CHANNEL_TIME_RX

#define NL80211_SURVEY_INFO_CHANNEL_TIME_RX NL80211_SURVEY_INFO_TIME_RX

Definition at line 3199 of file nl80211-new.h.

◆ NL80211_SURVEY_INFO_CHANNEL_TIME_TX

#define NL80211_SURVEY_INFO_CHANNEL_TIME_TX NL80211_SURVEY_INFO_TIME_TX

Definition at line 3200 of file nl80211-new.h.

◆ NL80211_TKIP_DATA_OFFSET_ENCR_KEY

#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0

Definition at line 2393 of file nl80211-new.h.

◆ NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY

#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24

Definition at line 2395 of file nl80211-new.h.

◆ NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY

#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16

Definition at line 2394 of file nl80211-new.h.

◆ NL80211_TXQ_ATTR_QUEUE

#define NL80211_TXQ_ATTR_QUEUE NL80211_TXQ_ATTR_AC

Definition at line 3508 of file nl80211-new.h.

◆ NL80211_TXQ_Q_BE

#define NL80211_TXQ_Q_BE NL80211_AC_BE

Definition at line 3511 of file nl80211-new.h.

◆ NL80211_TXQ_Q_BK

#define NL80211_TXQ_Q_BK NL80211_AC_BK

Definition at line 3512 of file nl80211-new.h.

◆ NL80211_TXQ_Q_VI

#define NL80211_TXQ_Q_VI NL80211_AC_VI

Definition at line 3510 of file nl80211-new.h.

◆ NL80211_TXQ_Q_VO

#define NL80211_TXQ_Q_VO NL80211_AC_VO

Definition at line 3509 of file nl80211-new.h.

◆ NL80211_TXRATE_MCS

#define NL80211_TXRATE_MCS NL80211_TXRATE_HT

Definition at line 3807 of file nl80211-new.h.

◆ NL80211_VENDOR_ID_IS_LINUX

#define NL80211_VENDOR_ID_IS_LINUX 0x80000000

Definition at line 4858 of file nl80211-new.h.

◆ NL80211_VHT_CAPABILITY_LEN

#define NL80211_VHT_CAPABILITY_LEN 12

Definition at line 2397 of file nl80211-new.h.

◆ NL80211_VHT_NSS_MAX

#define NL80211_VHT_NSS_MAX 8

Definition at line 3808 of file nl80211-new.h.

◆ nl80211_wowlan_pattern_support

#define nl80211_wowlan_pattern_support nl80211_pattern_support

Definition at line 3979 of file nl80211-new.h.

◆ NL80211_WOWLAN_PKTPAT_MASK

#define NL80211_WOWLAN_PKTPAT_MASK NL80211_PKTPAT_MASK

Definition at line 3974 of file nl80211-new.h.

◆ NL80211_WOWLAN_PKTPAT_OFFSET

#define NL80211_WOWLAN_PKTPAT_OFFSET NL80211_PKTPAT_OFFSET

Definition at line 3976 of file nl80211-new.h.

◆ NL80211_WOWLAN_PKTPAT_PATTERN

#define NL80211_WOWLAN_PKTPAT_PATTERN NL80211_PKTPAT_PATTERN

Definition at line 3975 of file nl80211-new.h.

◆ NUM_NL80211_WOWLAN_PKTPAT

#define NUM_NL80211_WOWLAN_PKTPAT NUM_NL80211_PKTPAT

Definition at line 3977 of file nl80211-new.h.

Enumeration Type Documentation

◆ nl80211_ac

enum nl80211_ac

Enumerator
NL80211_AC_VO
NL80211_AC_VI
NL80211_AC_BE
NL80211_AC_BK
NL80211_NUM_ACS

Definition at line 3499 of file nl80211-new.h.

◆ nl80211_acl_policy

enum nl80211_acl_policy

enum nl80211_acl_policy - access control policy

Access control policy is applied on a MAC list set by NL80211_CMD_START_AP and NL80211_CMD_SET_MAC_ACL, to be used with NL80211_ATTR_ACL_POLICY.

: Deny stations which are listed in ACL, i.e. allow all the stations which are not listed in ACL to authenticate. : Allow the stations which are listed in ACL, i.e. deny all the stations which are not listed in ACL.

Enumerator
NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED
NL80211_ACL_POLICY_DENY_UNLESS_LISTED

Definition at line 4746 of file nl80211-new.h.

◆ nl80211_attr_coalesce_rule

enum nl80211_attr_coalesce_rule

enum nl80211_attr_coalesce_rule - coalesce rule attribute : invalid number for nested attribute : delay in msecs used for packet coalescing : condition for packet coalescence, see &enum nl80211_coalesce_condition. : packet offset, pattern is matched after these fixed number of bytes of received packet : number of attributes : max attribute number

Enumerator
__NL80211_COALESCE_RULE_INVALID
NL80211_ATTR_COALESCE_RULE_DELAY
NL80211_ATTR_COALESCE_RULE_CONDITION
NL80211_ATTR_COALESCE_RULE_PKT_PATTERN
NUM_NL80211_ATTR_COALESCE_RULE
NL80211_ATTR_COALESCE_RULE_MAX

Definition at line 4233 of file nl80211-new.h.

◆ nl80211_attr_cqm

enum nl80211_attr_cqm

enum nl80211_attr_cqm - connection quality monitor attributes : invalid : RSSI threshold in dBm. This value specifies the threshold for the RSSI level at which an event will be sent. Zero to disable. : RSSI hysteresis in dBm. This value specifies the minimum amount the RSSI level must change after an event before a new event may be issued (to reduce effects of RSSI oscillation). : RSSI threshold event : a u32 value indicating that this many consecutive packets were not acknowledged by the peer : TX error rate in %. Minimum % of TX failures during the given NL80211_ATTR_CQM_TXE_INTVL before an NL80211_CMD_NOTIFY_CQM with reported NL80211_ATTR_CQM_TXE_RATE and NL80211_ATTR_CQM_TXE_PKTS is generated. : number of attempted packets in a given NL80211_ATTR_CQM_TXE_INTVL before NL80211_ATTR_CQM_TXE_RATE is checked. : interval in seconds. Specifies the periodic interval in which NL80211_ATTR_CQM_TXE_PKTS and NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting. : flag attribute that's set in a beacon loss event : internal : highest key attribute

Enumerator
__NL80211_ATTR_CQM_INVALID
NL80211_ATTR_CQM_RSSI_THOLD
NL80211_ATTR_CQM_RSSI_HYST
NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT
NL80211_ATTR_CQM_PKT_LOSS_EVENT
NL80211_ATTR_CQM_TXE_RATE
NL80211_ATTR_CQM_TXE_PKTS
NL80211_ATTR_CQM_TXE_INTVL
NL80211_ATTR_CQM_BEACON_LOSS_EVENT
__NL80211_ATTR_CQM_AFTER_LAST
NL80211_ATTR_CQM_MAX

Definition at line 3878 of file nl80211-new.h.

◆ nl80211_attrs

enum nl80211_attrs

enum nl80211_attrs - nl80211 netlink attributes

: unspecified attribute to catch errors

: index of wiphy to operate on, cf. /sys/class/ieee80211/<phyname>/index : wiphy name (used for renaming) : a nested array of TX queue parameters : frequency of the selected channel in MHz, defines the channel together with the (deprecated) NL80211_ATTR_WIPHY_CHANNEL_TYPE attribute or the attributes NL80211_ATTR_CHANNEL_WIDTH and if needed NL80211_ATTR_CENTER_FREQ1 and NL80211_ATTR_CENTER_FREQ2 : u32 attribute containing one of the values of &enum nl80211_chan_width, describing the channel width. See the documentation of the enum for more information. : Center frequency of the first part of the channel, used for anything but 20 MHz bandwidth : Center frequency of the second part of the channel, used only for 80+80 MHz bandwidth : included with NL80211_ATTR_WIPHY_FREQ if HT20 or HT40 are to be used (i.e., HT disabled if not included): NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including this attribute) NL80211_CHAN_HT20 = HT20 only NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel This attribute is now deprecated. : TX retry limit for frames whose length is less than or equal to the RTS threshold; allowed range: 1..255; dot11ShortRetryLimit; u8 : TX retry limit for frames whose length is greater than the RTS threshold; allowed range: 1..255; dot11ShortLongLimit; u8 : fragmentation threshold, i.e., maximum length in octets for frames; allowed range: 256..8000, disable fragmentation with (u32)-1; dot11FragmentationThreshold; u32 : RTS threshold (TX frames with length larger than or equal to this use RTS/CTS handshake); allowed range: 0..65536, disable with (u32)-1; dot11RTSThreshold; u32 : Coverage Class as defined by IEEE 802.11 section 7.3.2.9; dot11CoverageClass; u8

: network interface index of the device to operate on : network interface name : type of virtual interface, see &enum nl80211_iftype

: wireless device identifier, used for pseudo-devices that don't have a netdev (u64)

: MAC address (various uses)

: (temporal) key data; for TKIP this consists of 16 bytes encryption key followed by 8 bytes each for TX and RX MIC keys : key ID (u8, 0-3) : key cipher suite (u32, as defined by IEEE 802.11 section 7.3.2.25.1, e.g. 0x000FAC04) : transmit key sequence number (IV/PN) for TKIP and CCMP keys, each six bytes in little endian : Flag attribute indicating the key is default key : Flag attribute indicating the key is the default management key : For crypto settings for connect or other commands, indicates which pairwise cipher suites are used : For crypto settings for connect or other commands, indicates which group cipher suite is used

: beacon interval in TU : DTIM period for beaconing : portion of the beacon before the TIM IE : portion of the beacon after the TIM IE

: Association ID for the station (u16) : flags, nested element with NLA_FLAG attributes of &enum nl80211_sta_flags (deprecated, use NL80211_ATTR_STA_FLAGS2) : listen interval as defined by IEEE 802.11 7.3.1.6 (u16). : supported rates, array of supported rates as defined by IEEE 802.11 7.3.2.2 but without the length restriction (at most NL80211_MAX_SUPP_RATES). : interface index of VLAN interface to move station to, or the AP interface the station was originally added to to. : information about a station, part of station info given for NL80211_CMD_GET_STATION, nested attribute containing info as possible, see &enum nl80211_sta_info.

: Information about an operating bands, consisting of a nested array.

: mesh id (1-32 bytes). : action to perform on the mesh peer link (see &enum nl80211_plink_action). : MAC address of the next hop for a mesh path. : information about a mesh_path, part of mesh path info given for NL80211_CMD_GET_MPATH, nested attribute described at &enum nl80211_mpath_info.

: flags, nested element with NLA_FLAG attributes of &enum nl80211_mntr_flags.

: an ISO-3166-alpha2 country code for which the current regulatory domain should be set to or is already set to. For example, 'CR', for Costa Rica. This attribute is used by the kernel to query the CRDA to retrieve one regulatory domain. This attribute can also be used by userspace to query the kernel for the currently set regulatory domain. We chose an alpha2 as that is also used by the IEEE-802.11 country information element to identify a country. Users can also simply ask the wireless core to set regulatory domain to a specific alpha2. : a nested array of regulatory domain regulatory rules.

: whether CTS protection is enabled (u8, 0 or 1) : whether short preamble is enabled (u8, 0 or 1) : whether short slot time enabled (u8, 0 or 1) : basic rates, array of basic rates in format defined by IEEE 802.11 7.3.2.2 but without the length restriction (at most NL80211_MAX_SUPP_RATES).

: HT Capability information element (from association request when used with NL80211_CMD_NEW_STATION)

: nested attribute containing all supported interface types, each a flag attribute with the number of the interface mode.

: Management frame subtype for NL80211_CMD_SET_MGMT_EXTRA_IE.

: Information element(s) data (used, e.g., with NL80211_CMD_SET_MGMT_EXTRA_IE).

: number of SSIDs you can scan with a single scan request, a wiphy attribute. : number of SSIDs you can scan with a single scheduled scan request, a wiphy attribute. : maximum length of information elements that can be added to a scan request : maximum length of information elements that can be added to a scheduled scan request : maximum number of sets that can be used with , a wiphy attribute.

: nested attribute with frequencies (in MHz) : nested attribute with SSIDs, leave out for passive scanning and include a zero-length SSID (wildcard) for wildcard scan : scan result BSS

: indicates who requested the regulatory domain currently in effect. This could be any of the NL80211_REGDOM_SET_BY_* : indicates the type of the regulatory domain currently set. This can be one of the nl80211_reg_type (NL80211_REGDOM_TYPE_*)

: wiphy attribute that specifies an array of command numbers (i.e. a mapping index to command number) that the driver for the given wiphy supports.

: frame data (binary attribute), including frame header and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and NL80211_CMD_ASSOCIATE events : SSID (binary attribute, 0..32 octets) : AuthenticationType, see &enum nl80211_auth_type, represented as a u32 : ReasonCode for NL80211_CMD_DEAUTHENTICATE and NL80211_CMD_DISASSOCIATE, u16

: Key Type, see &enum nl80211_key_type, represented as a u32

: A channel which has suffered a regulatory change due to considerations from a beacon hint. This attribute reflects the state of the channel before the beacon hint processing. This attributes consists of a nested attribute containing NL80211_FREQUENCY_ATTR_* : A channel which has suffered a regulatory change due to considerations from a beacon hint. This attribute reflects the state of the channel after the beacon hint processing. This attributes consists of a nested attribute containing NL80211_FREQUENCY_ATTR_*

: a set of u32 values indicating the supported cipher suites

: a flag indicating the IBSS should not try to look for other networks on different channels

: a flag indicating than an operation timed out; this is used, e.g., with NL80211_CMD_AUTHENTICATE event

: Whether management frame protection (IEEE 802.11w) is used for the association (&enum nl80211_mfp, represented as a u32); this attribute can be used with NL80211_CMD_ASSOCIATE and NL80211_CMD_CONNECT requests

: Attribute containing a &struct nl80211_sta_flag_update.

: A flag indicating whether user space controls IEEE 802.1X port, i.e., sets/clears NL80211_STA_FLAG_AUTHORIZED, in station mode. If the flag is included in NL80211_CMD_ASSOCIATE request, the driver will assume that the port is unauthorized until authorized by user space. Otherwise, port is marked authorized by default in station mode. : A 16-bit value indicating the ethertype that will be used for key negotiation. It can be specified with the associate and connect commands. If it is not specified, the value defaults to 0x888E (PAE, 802.1X). This attribute is also used as a flag in the wiphy information to indicate that protocols other than PAE are supported. : When included along with NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom ethertype frames used for key negotiation must not be encrypted.

: Testmode data blob, passed through to the driver. We recommend using nested, driver-specific attributes within this.

: A flag indicating that the DISCONNECT event was due to the AP disconnecting the station, and not due to a local disconnect request. : StatusCode for the NL80211_CMD_CONNECT event (u16) : Flag attribute, used with connect(), indicating that protected APs should be used. This is also used with NEW_BEACON to indicate that the BSS is to use protection.

: Used with CONNECT, ASSOCIATE, and NEW_BEACON to indicate which unicast key ciphers will be used with the connection (an array of u32). : Used with CONNECT, ASSOCIATE, and NEW_BEACON to indicate which group key cipher will be used with the connection (a u32). : Used with CONNECT, ASSOCIATE, and NEW_BEACON to indicate which WPA version(s) the AP we want to associate with is using (a u32 with flags from &enum nl80211_wpa_versions). : Used with CONNECT, ASSOCIATE, and NEW_BEACON to indicate which key management algorithm(s) to use (an array of u32).

: (Re)association request information elements as sent out by the card, for ROAM and successful CONNECT events. : (Re)association response information elements as sent by peer, for ROAM and successful CONNECT events.

: previous BSSID, to be used in ASSOCIATE and CONNECT commands to specify a request to reassociate within an ESS, i.e., to use Reassociate Request frame (with the value of this attribute in the Current AP address field) instead of Association Request frame which is used for the initial association to an ESS.

: key information in a nested attribute with NL80211_KEY_* sub-attributes : array of keys for static WEP keys for connect() and join_ibss(), key information is in a nested attribute each with NL80211_KEY_* sub-attributes

: Process ID of a network namespace.

: Used to indicate consistent snapshots for dumps. This number increases whenever the object list being dumped changes, and as such userspace can verify that it has obtained a complete and consistent snapshot by verifying that all dump messages contain the same generation number. If it changed then the list changed and the dump should be repeated completely from scratch.

: Use 4-address frames on a virtual interface

: survey information about a channel, part of the survey response for NL80211_CMD_GET_SURVEY, nested attribute containing info as possible, see &enum survey_info.

: PMK material for PMKSA caching. : maximum number of PMKIDs a firmware can cache, a wiphy attribute.

: Duration of an operation in milliseconds, u32. : Device attribute that specifies the maximum duration that can be requested with the remain-on-channel operation, in milliseconds, u32.

: Generic 64-bit cookie to identify objects.

: Nested set of attributes (enum nl80211_tx_rate_attributes) describing TX rates per band. The enum nl80211_band value is used as the index (nla_type() of the nested data. If a band is not included, it will be configured to allow all rates based on negotiated supported rates information. This attribute is used with NL80211_CMD_SET_TX_BITRATE_MASK and with starting AP, and joining mesh networks (not IBSS yet). In the later case, it must specify just a single bitrate, which is to be used for the beacon. The driver must also specify support for this with the extended features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY, NL80211_EXT_FEATURE_BEACON_RATE_HT and NL80211_EXT_FEATURE_BEACON_RATE_VHT.

: A binary attribute which typically must contain at least one byte, currently used with . : A u16 indicating the frame type/subtype for the command. : wiphy capability attribute, which is a nested attribute of NL80211_ATTR_FRAME_TYPE attributes, containing information about which frame types can be transmitted with NL80211_CMD_FRAME. : wiphy capability attribute, which is a nested attribute of NL80211_ATTR_FRAME_TYPE attributes, containing information about which frame types can be registered for RX.

: Flag attribute indicating that the frame was acknowledged by the recipient.

: powersave state, using &enum nl80211_ps_state values.

: connection quality monitor configuration in a nested attribute with NL80211_ATTR_CQM_* sub-attributes.

: Flag attribute to indicate that a command is requesting a local authentication/association state change without invoking actual management frame exchange. This can be used with NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE, NL80211_CMD_DISASSOCIATE.

: (AP mode) Do not forward traffic between stations connected to this BSS.

: Transmit power setting type. See &enum nl80211_tx_power_setting for possible values. : Transmit power level in signed mBm units. This is used in association with for non-automatic settings.

: The device supports IBSS RSN, which mostly means support for per-station GTKs.

: Bitmap of allowed antennas for transmitting. This can be used to mask out antennas which are not attached or should not be used for transmitting. If an antenna is not selected in this bitmap the hardware is not allowed to transmit on this antenna.

Each bit represents one antenna, starting with antenna 1 at the first bit. Depending on which antennas are selected in the bitmap, 802.11n drivers can derive which chainmasks to use (if all antennas belonging to a particular chain are disabled this chain should be disabled) and if a chain has diversity antennas wether diversity should be used or not. HT capabilities (STBC, TX Beamforming, Antenna selection) can be derived from the available chains after applying the antenna mask. Non-802.11n drivers can derive wether to use diversity or not. Drivers may reject configurations or RX/TX mask combinations they cannot support by returning -EINVAL.

: Bitmap of allowed antennas for receiving. This can be used to mask out antennas which are not attached or should not be used for receiving. If an antenna is not selected in this bitmap the hardware should not be configured to receive on this antenna. For a more detailed description see .

: Bitmap of antennas which are available for configuration as TX antennas via the above parameters.

: Bitmap of antennas which are available for configuration as RX antennas via the above parameters.

: Multicast tx rate (in 100 kbps) for IBSS

: For management frame TX, the frame may be transmitted on another channel when the channel given doesn't match the current channel. If the current channel doesn't match and this flag isn't set, the frame will be rejected. This is also used as an nl80211 capability flag.

: HT operation mode (u16)

: A nested attribute containing flags attributes, specifying what a key should be set as default as. See &enum nl80211_key_default_types.

: Optional mesh setup parameters. These cannot be changed once the mesh is active. : Mesh configuration parameters, a nested attribute containing attributes from &enum nl80211_meshconf_params. : Currently, this means the underlying driver allows auth frames in a mesh to be passed to userspace for processing via the flag. : The state of a mesh peer link as defined in &enum nl80211_plink_state. Used when userspace is driving the peer link management state machine. or must be enabled.

: indicates, as part of the wiphy capabilities, the supported WoWLAN triggers : used by NL80211_CMD_SET_WOWLAN to indicate which WoW triggers should be enabled. This is also used by NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN triggers.

: Interval between scheduled scan cycles, in msecs.

: Nested attribute with one or more sets of attributes to match during scheduled scans. Only BSSs that match any of the sets will be reported. These are pass-thru filter rules. For a match to succeed, the BSS must match all attributes of a set. Since not every hardware supports matching all types of attributes, there is no guarantee that the reported BSSs are fully complying with the match sets and userspace needs to be able to ignore them by itself. Thus, the implementation is somewhat hardware-dependent, but this is only an optimization and the userspace application needs to handle all the non-filtered results anyway. If the match attributes don't make sense when combined with the values passed in (eg. if an SSID is included in the probe request, but the match attributes will never let it go through), -EINVAL may be returned. If ommited, no filtering is done.

: Nested attribute listing the supported interface combinations. In each nested item, it contains attributes defined in &enum nl80211_if_combination_attrs. : Nested attribute (just like NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that are managed in software: interfaces of these types aren't subject to any restrictions in their number or combinations.

: nested attribute containing the information necessary for GTK rekeying in the device, see &enum nl80211_rekey_data.

: rates per to be advertised as supported in scan, nested array attribute containing an entry for each band, with the entry being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but without the length restriction (at most NL80211_MAX_SUPP_RATES).

: indicates whether SSID is to be hidden from Beacon and Probe Response (when response to wildcard Probe Request); see &enum nl80211_hidden_ssid, represented as a u32

: Information element(s) for Probe Response frame. This is used with NL80211_CMD_NEW_BEACON and NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the driver (or firmware) replies to Probe Request frames. : Information element(s) for (Re)Association Response frames. This is used with NL80211_CMD_NEW_BEACON and NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into (Re)Association Response frames when the driver (or firmware) replies to (Re)Association Request frames.

: Nested attribute containing the wme configuration of the station, see &enum nl80211_sta_wme_attr. : the device supports uapsd when working as AP.

: Indicates whether the firmware is capable of roaming to another AP in the same ESS if the signal lever is low.

: Nested attribute containing the PMKSA caching candidate information, see &enum nl80211_pmksa_candidate_attr.

: Indicates whether to use CCK rate or not for management frames transmission. In order to avoid p2p probe/action frames are being transmitted at CCK rate in 2GHz band, the user space applications use this attribute. This attribute is used with NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_FRAME commands.

: Low level TDLS action code (e.g. link setup request, link setup confirm, link teardown, etc.). Values are described in the TDLS (802.11z) specification. : Non-zero token for uniquely identifying a TDLS conversation between two devices. : High level TDLS operation; see &enum nl80211_tdls_operation, represented as a u8. : A flag indicating the device can operate as a TDLS peer sta. : The TDLS discovery/setup and teardown procedures should be performed by sending TDLS packets via NL80211_CMD_TDLS_MGMT. Otherwise NL80211_CMD_TDLS_OPER should be used for asking the driver to perform a TDLS operation.

: This u32 attribute may be listed for devices that have AP support to indicate that they have the AP SME integrated with support for the features listed in this attribute, see &enum nl80211_ap_sme_features.

: Used with NL80211_CMD_FRAME, this tells the driver to not wait for an acknowledgement. Note that due to this, it will also not give a status callback nor return a cookie. This is mostly useful for probe responses to save airtime.

: This u32 attribute contains flags from &enum nl80211_feature_flags and is advertised in wiphy information. : Indicates that the HW responds to probe requests while operating in AP-mode. This attribute holds a bitmap of the supported protocols for offloading (see &enum nl80211_probe_resp_offload_support_attr).

: Probe Response template data. Contains the entire probe-response frame. The DA field in the 802.11 header is zero-ed out, to be filled by the FW. : Force HT capable interfaces to disable this feature. Currently, only supported in mac80211 drivers. : Specify which bits of the ATTR_HT_CAPABILITY to which attention should be paid. Currently, only mac80211 NICs support this feature. The values that may be configured are: MCS rates, MAX-AMSDU, HT-20-40 and HT_CAP_SGI_40 AMPDU density and AMPDU factor. All values are treated as suggestions and may be ignored by the driver as required. The actual values may be seen in the station debugfs ht_caps file.

: region for regulatory rules which this country abides to when initiating radiation on DFS channels. A country maps to one DFS region.

: This u16 bitmap contains the No Ack Policy of up to 16 TIDs.

: timeout value in seconds, this can be used by the drivers which has MLME in firmware and does not have support to report per station tx/rx activity to free up the staion entry from the list. This needs to be used when the driver advertises the capability to timeout the stations.

: signal strength in dBm (as a 32-bit int); this attribute is (depending on the driver capabilities) added to received frames indicated with NL80211_CMD_FRAME.

: Background scan period in seconds or 0 to disable background scan.

: type of regulatory hint passed from userspace. If unset it is assumed the hint comes directly from a user. If set code could specify exactly what type of source was used to provide the hint. For the different types of allowed user regulatory hints see nl80211_user_reg_hint_type.

: The reason for which AP has rejected the connection request from a station. nl80211_connect_failed_reason enum has different reasons of connection failure.

: SAE elements in Authentication frames. This starts with the Authentication transaction sequence number field.

: VHT Capability information element (from association request when used with NL80211_CMD_NEW_STATION)

: scan request control flags (u32)

: P2P GO Client Traffic Window (u8), used with the START_AP and SET_BSS commands : P2P GO opportunistic PS (u8), used with the START_AP and SET_BSS commands. This can have the values 0 or 1; if not given in START_AP 0 is assumed, if not given in SET_BSS no change is made.

: local mesh STA link-specific power mode defined in &enum nl80211_mesh_power_mode.

: ACL policy, see &enum nl80211_acl_policy, carried in a u32 attribute

: Array of nested MAC addresses, used for MAC ACL.

: u32 attribute to advertise the maximum number of MAC addresses that a device can support for MAC ACL.

: Type of radar event for notification to userspace, contains a value of enum nl80211_radar_event (u32).

: 802.11 extended capabilities that the kernel driver has and handles. The format is the same as the IE contents. See 802.11-2012 8.4.2.29 for more information. : Extended capabilities that the kernel driver has set in the NL80211_ATTR_EXT_CAPA value, for multibit fields.

: Station capabilities (u16) are advertised to the driver, e.g., to enable TDLS power save (PU-APSD).

: Station extended capabilities are advertised to the driver, e.g., to enable TDLS off channel operations and PU-APSD.

: global nl80211 feature flags, see &enum nl80211_protocol_features, the attribute is a u32.

: flag attribute, userspace supports receiving the data for a single wiphy split across multiple messages, given with wiphy dump message

: Mobility Domain Identifier

: Resource Information Container Information Element

: critical protocol identifier requiring increased reliability, see &enum nl80211_crit_proto_id (u16). : duration in milliseconds in which the connection should have increased reliability (u16).

: Association ID for the peer TDLS station (u16). This is similar to but with a difference of being allowed to be used with the first command to update a TDLS peer STA entry.

: Coalesce rule information.

: u32 attribute specifying the number of TBTT's until the channel switch event. : flag attribute specifying that transmission must be blocked on the current channel (before the channel switch operation). : Nested set of attributes containing the IE information for the time while performing a channel switch. : An array of offsets (u16) to the channel switch counters in the beacons tail (NL80211_ATTR_BEACON_TAIL). : An array of offsets (u16) to the channel switch counters in the probe response (NL80211_ATTR_PROBE_RESP).

: flags for nl80211_send_mgmt(), u32. As specified in the &enum nl80211_rxmgmt_flags.

: array of supported channels.

: array of supported supported operating classes.

: A flag indicating whether user space controls DFS operation in IBSS mode. If the flag is included in NL80211_CMD_JOIN_IBSS request, the driver will allow use of DFS channels and reports radar events to userspace. Userspace is required to react to radar events, e.g. initiate a channel switch or leave the IBSS network.

: A flag indicating that the device supports 5 MHz channel bandwidth. : A flag indicating that the device supports 10 MHz channel bandwidth.

: Operating mode field from Operating Mode Notification Element based on association request when used with NL80211_CMD_NEW_STATION; u8 attribute.

: The vendor ID, either a 24-bit OUI or, if NL80211_VENDOR_ID_IS_LINUX is set, a special Linux ID (not used yet) : vendor sub-command : data for the vendor command, if any; this attribute is also used for vendor command feature advertisement : used for event list advertising in the wiphy info, containing a nested array of possible events

: IP DSCP mapping for Interworking QoS mapping. This data is in the format defined for the payload of the QoS Map Set element in IEEE Std 802.11-2012, 8.4.2.97.

: MAC address recommendation as initial BSS : frequency of the recommended initial BSS

: Device attribute that indicates how many associated stations are supported in AP mode (including P2P GO); u32. Since drivers may not have a fixed limit on the maximum number (e.g., other concurrent operations may affect this), drivers are allowed to advertise values that cannot always be met. In such cases, an attempt to add a new station entry with may fail.

: An array of csa counter offsets (u16) which should be updated when the frame is transmitted. : U8 attribute used to advertise the maximum supported number of csa counters.

: flags for TDLS peer capabilities, u32. As specified in the &enum nl80211_tdls_peer_capability.

: Flag attribute, if set during interface creation then the new interface will be owned by the netlink socket that created it and will be destroyed when the socket is closed. If set during scheduled scan start then the new scan req will be owned by the netlink socket that created it and the scheduled scan will be stopped when the socket is closed. If set during configuration of regulatory indoor operation then the regulatory indoor configuration would be owned by the netlink socket that configured the indoor setting, and the indoor operation would be cleared when the socket is closed. If set during NAN interface creation, the interface will be destroyed if the socket is closed just like any other interface. Moreover, only the netlink socket that created the interface will be allowed to add and remove functions. NAN notifications will be sent in unicast to that socket. Without this attribute, any socket can add functions and the notifications will be sent to the NL80211_MCGRP_NAN multicast group.

: flag attribute indicating the current end is the TDLS link initiator.

: flag for indicating whether the current connection shall support Radio Resource Measurements (11k). This attribute can be used with NL80211_CMD_ASSOCIATE and NL80211_CMD_CONNECT requests. User space applications are expected to use this flag only if the underlying device supports these minimal RRM features: NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES, NL80211_FEATURE_QUIET, Or, if global RRM is supported, see: NL80211_EXT_FEATURE_RRM If this flag is used, driver must add the Power Capabilities IE to the association request. In addition, it must also set the RRM capability flag in the association request's Capability Info field.

: flag attribute used to enable ACK timeout estimation algorithm (dynack). In order to activate dynack NL80211_FEATURE_ACKTO_ESTIMATION feature flag must be set by lower drivers to indicate dynack capability. Dynack is automatically disabled setting valid value for coverage class.

: a TSID value (u8 attribute) : user priority value (u8 attribute) : admitted time in units of 32 microseconds (per second) (u16 attribute)

: SMPS mode to use (ap mode). see &enum nl80211_smps_mode.

: operating class

: MAC address mask

: flag attribute indicating this device is self-managing its regulatory information and any regulatory domain obtained from it is coming from the device's wiphy and not the global cfg80211 regdomain.

: extended feature flags contained in a byte array. The feature flags are identified by their bit index (see &enum nl80211_ext_feature_index). The bit index is ordered starting at the least-significant bit of the first byte in the array, ie. bit index 0 is located at bit 0 of byte 0. bit index 25 would be located at bit 1 of byte 3 (u8 array).

: Request overall radio statistics to be returned along with other survey data. If set, may return a survey entry without a channel indicating global radio statistics (only some values are valid and make sense.) For devices that don't return such an entry even then, the information should be contained in the result as the sum of the respective counters over all channels.

: delay before the first cycle of a scheduled scan is started. Or the delay before a WoWLAN net-detect scan is started, counting from the moment the system is suspended. This value is a u32, in seconds.

: flag attribute, if set indicates that the device is operating in an indoor environment.

: maximum number of scan plans for scheduled scan supported by the device (u32), a wiphy attribute. : maximum interval (in seconds) for a scan plan (u32), a wiphy attribute. : maximum number of iterations in a scan plan (u32), a wiphy attribute. : a list of scan plans for scheduled scan. Each scan plan defines the number of scan iterations and the interval between scans. The last scan plan will always run infinitely, thus it must not specify the number of iterations, only the interval between scans. The scan plans are executed sequentially. Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan. : flag attribute. If set it means operate in a PBSS. Specified in NL80211_CMD_CONNECT to request connecting to a PCP, and in NL80211_CMD_START_AP to start a PCP instead of AP. Relevant for DMG networks only. : nested attribute for driver supporting the BSS selection feature. When used with NL80211_CMD_GET_WIPHY it contains attributes according &enum nl80211_bss_select_attr to indicate what BSS selection behaviours are supported. When used with NL80211_CMD_CONNECT it contains the behaviour-specific attribute containing the parameters for BSS selection to be done by driver and/or firmware.

: whether P2P PS mechanism supported or not. u8, one of the values of &enum nl80211_sta_p2p_ps_status

: attribute used for padding for 64-bit alignment

: Nested attribute of the following attributes: NL80211_ATTR_IFTYPE, NL80211_ATTR_EXT_CAPA, NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities per interface type.

: array of 24 bytes that defines a MU-MIMO groupID for monitor mode. The first 8 bytes are a mask that defines the membership in each group (there are 64 groups, group 0 and 63 are reserved), each bit represents a group and set to 1 for being a member in that group and 0 for not being a member. The remaining 16 bytes define the position in each group: 2 bits for each group. (smaller group numbers represented on most significant bits and bigger group numbers on least significant bits.) This attribute is used only if all interfaces are in monitor mode. Set this attribute in order to monitor packets using the given MU-MIMO groupID data. to turn off that feature set all the bits of the groupID to zero. : mac address for the sniffer to follow when using MU-MIMO air sniffer. to turn that feature off set an invalid mac address (e.g. FF:FF:FF:FF:FF:FF)

: The time at which the scan was actually started (u64). The time is the TSF of the BSS the interface that requested the scan is connected to (if available, otherwise this attribute must not be included). : The BSS according to which NL80211_ATTR_SCAN_START_TIME_TSF is set. : measurement duration in TUs (u16). If NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY is not set, this is the maximum measurement duration allowed. This attribute is used with measurement requests. It can also be used with NL80211_CMD_TRIGGER_SCAN if the scan is used for beacon report radio measurement. : flag attribute that indicates that the duration specified with NL80211_ATTR_MEASUREMENT_DURATION is mandatory. If this flag is not set, the duration is the maximum duration and the actual measurement duration may be shorter.

: Association ID for the mesh peer (u16). This is used to pull the stored data for mesh peer in power save state.

: the master preference to be used by NL80211_CMD_START_NAN and optionally with NL80211_CMD_CHANGE_NAN_CONFIG. Its type is u8 and it can't be 0. Also, values 1 and 255 are reserved for certification purposes and should not be used during a normal device operation. : NAN dual band operation config (see &enum nl80211_nan_dual_band_conf). This attribute is used with NL80211_CMD_START_NAN and optionally with NL80211_CMD_CHANGE_NAN_CONFIG. : a function that can be added to NAN. See &enum nl80211_nan_func_attributes for description of this nested attribute. : used to report a match. This is a nested attribute. See &enum nl80211_nan_match_attributes.

: total number of nl80211_attrs available : highest attribute number currently defined : internal use

Enumerator
NL80211_ATTR_UNSPEC
NL80211_ATTR_WIPHY
NL80211_ATTR_WIPHY_NAME
NL80211_ATTR_IFINDEX
NL80211_ATTR_IFNAME
NL80211_ATTR_IFTYPE
NL80211_ATTR_MAC
NL80211_ATTR_KEY_DATA
NL80211_ATTR_KEY_IDX
NL80211_ATTR_KEY_CIPHER
NL80211_ATTR_KEY_SEQ
NL80211_ATTR_KEY_DEFAULT
NL80211_ATTR_BEACON_INTERVAL
NL80211_ATTR_DTIM_PERIOD
NL80211_ATTR_BEACON_HEAD
NL80211_ATTR_BEACON_TAIL
NL80211_ATTR_STA_AID
NL80211_ATTR_STA_FLAGS
NL80211_ATTR_STA_LISTEN_INTERVAL
NL80211_ATTR_STA_SUPPORTED_RATES
NL80211_ATTR_STA_VLAN
NL80211_ATTR_STA_INFO
NL80211_ATTR_WIPHY_BANDS
NL80211_ATTR_MNTR_FLAGS
NL80211_ATTR_MESH_ID
NL80211_ATTR_STA_PLINK_ACTION
NL80211_ATTR_MPATH_NEXT_HOP
NL80211_ATTR_MPATH_INFO
NL80211_ATTR_BSS_CTS_PROT
NL80211_ATTR_BSS_SHORT_PREAMBLE
NL80211_ATTR_BSS_SHORT_SLOT_TIME
NL80211_ATTR_HT_CAPABILITY
NL80211_ATTR_SUPPORTED_IFTYPES
NL80211_ATTR_REG_ALPHA2
NL80211_ATTR_REG_RULES
NL80211_ATTR_MESH_CONFIG
NL80211_ATTR_BSS_BASIC_RATES
NL80211_ATTR_WIPHY_TXQ_PARAMS
NL80211_ATTR_WIPHY_FREQ
NL80211_ATTR_WIPHY_CHANNEL_TYPE
NL80211_ATTR_KEY_DEFAULT_MGMT
NL80211_ATTR_MGMT_SUBTYPE
NL80211_ATTR_IE
NL80211_ATTR_MAX_NUM_SCAN_SSIDS
NL80211_ATTR_SCAN_FREQUENCIES
NL80211_ATTR_SCAN_SSIDS
NL80211_ATTR_GENERATION
NL80211_ATTR_BSS
NL80211_ATTR_REG_INITIATOR
NL80211_ATTR_REG_TYPE
NL80211_ATTR_SUPPORTED_COMMANDS
NL80211_ATTR_FRAME
NL80211_ATTR_SSID
NL80211_ATTR_AUTH_TYPE
NL80211_ATTR_REASON_CODE
NL80211_ATTR_KEY_TYPE
NL80211_ATTR_MAX_SCAN_IE_LEN
NL80211_ATTR_CIPHER_SUITES
NL80211_ATTR_FREQ_BEFORE
NL80211_ATTR_FREQ_AFTER
NL80211_ATTR_FREQ_FIXED
NL80211_ATTR_WIPHY_RETRY_SHORT
NL80211_ATTR_WIPHY_RETRY_LONG
NL80211_ATTR_WIPHY_FRAG_THRESHOLD
NL80211_ATTR_WIPHY_RTS_THRESHOLD
NL80211_ATTR_TIMED_OUT
NL80211_ATTR_USE_MFP
NL80211_ATTR_STA_FLAGS2
NL80211_ATTR_CONTROL_PORT
NL80211_ATTR_TESTDATA
NL80211_ATTR_PRIVACY
NL80211_ATTR_DISCONNECTED_BY_AP
NL80211_ATTR_STATUS_CODE
NL80211_ATTR_CIPHER_SUITES_PAIRWISE
NL80211_ATTR_CIPHER_SUITE_GROUP
NL80211_ATTR_WPA_VERSIONS
NL80211_ATTR_AKM_SUITES
NL80211_ATTR_REQ_IE
NL80211_ATTR_RESP_IE
NL80211_ATTR_PREV_BSSID
NL80211_ATTR_KEY
NL80211_ATTR_KEYS
NL80211_ATTR_PID
NL80211_ATTR_4ADDR
NL80211_ATTR_SURVEY_INFO
NL80211_ATTR_PMKID
NL80211_ATTR_MAX_NUM_PMKIDS
NL80211_ATTR_DURATION
NL80211_ATTR_COOKIE
NL80211_ATTR_WIPHY_COVERAGE_CLASS
NL80211_ATTR_TX_RATES
NL80211_ATTR_FRAME_MATCH
NL80211_ATTR_ACK
NL80211_ATTR_PS_STATE
NL80211_ATTR_CQM
NL80211_ATTR_LOCAL_STATE_CHANGE
NL80211_ATTR_AP_ISOLATE
NL80211_ATTR_WIPHY_TX_POWER_SETTING
NL80211_ATTR_WIPHY_TX_POWER_LEVEL
NL80211_ATTR_TX_FRAME_TYPES
NL80211_ATTR_RX_FRAME_TYPES
NL80211_ATTR_FRAME_TYPE
NL80211_ATTR_CONTROL_PORT_ETHERTYPE
NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT
NL80211_ATTR_SUPPORT_IBSS_RSN
NL80211_ATTR_WIPHY_ANTENNA_TX
NL80211_ATTR_WIPHY_ANTENNA_RX
NL80211_ATTR_MCAST_RATE
NL80211_ATTR_OFFCHANNEL_TX_OK
NL80211_ATTR_BSS_HT_OPMODE
NL80211_ATTR_KEY_DEFAULT_TYPES
NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION
NL80211_ATTR_MESH_SETUP
NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX
NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX
NL80211_ATTR_SUPPORT_MESH_AUTH
NL80211_ATTR_STA_PLINK_STATE
NL80211_ATTR_WOWLAN_TRIGGERS
NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED
NL80211_ATTR_SCHED_SCAN_INTERVAL
NL80211_ATTR_INTERFACE_COMBINATIONS
NL80211_ATTR_SOFTWARE_IFTYPES
NL80211_ATTR_REKEY_DATA
NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS
NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN
NL80211_ATTR_SCAN_SUPP_RATES
NL80211_ATTR_HIDDEN_SSID
NL80211_ATTR_IE_PROBE_RESP
NL80211_ATTR_IE_ASSOC_RESP
NL80211_ATTR_STA_WME
NL80211_ATTR_SUPPORT_AP_UAPSD
NL80211_ATTR_ROAM_SUPPORT
NL80211_ATTR_SCHED_SCAN_MATCH
NL80211_ATTR_MAX_MATCH_SETS
NL80211_ATTR_PMKSA_CANDIDATE
NL80211_ATTR_TX_NO_CCK_RATE
NL80211_ATTR_TDLS_ACTION
NL80211_ATTR_TDLS_DIALOG_TOKEN
NL80211_ATTR_TDLS_OPERATION
NL80211_ATTR_TDLS_SUPPORT
NL80211_ATTR_TDLS_EXTERNAL_SETUP
NL80211_ATTR_DEVICE_AP_SME
NL80211_ATTR_DONT_WAIT_FOR_ACK
NL80211_ATTR_FEATURE_FLAGS
NL80211_ATTR_PROBE_RESP_OFFLOAD
NL80211_ATTR_PROBE_RESP
NL80211_ATTR_DFS_REGION
NL80211_ATTR_DISABLE_HT
NL80211_ATTR_HT_CAPABILITY_MASK
NL80211_ATTR_NOACK_MAP
NL80211_ATTR_INACTIVITY_TIMEOUT
NL80211_ATTR_RX_SIGNAL_DBM
NL80211_ATTR_BG_SCAN_PERIOD
NL80211_ATTR_WDEV
NL80211_ATTR_USER_REG_HINT_TYPE
NL80211_ATTR_CONN_FAILED_REASON
NL80211_ATTR_SAE_DATA
NL80211_ATTR_VHT_CAPABILITY
NL80211_ATTR_SCAN_FLAGS
NL80211_ATTR_CHANNEL_WIDTH
NL80211_ATTR_CENTER_FREQ1
NL80211_ATTR_CENTER_FREQ2
NL80211_ATTR_P2P_CTWINDOW
NL80211_ATTR_P2P_OPPPS
NL80211_ATTR_LOCAL_MESH_POWER_MODE
NL80211_ATTR_ACL_POLICY
NL80211_ATTR_MAC_ADDRS
NL80211_ATTR_MAC_ACL_MAX
NL80211_ATTR_RADAR_EVENT
NL80211_ATTR_EXT_CAPA
NL80211_ATTR_EXT_CAPA_MASK
NL80211_ATTR_STA_CAPABILITY
NL80211_ATTR_STA_EXT_CAPABILITY
NL80211_ATTR_PROTOCOL_FEATURES
NL80211_ATTR_SPLIT_WIPHY_DUMP
NL80211_ATTR_DISABLE_VHT
NL80211_ATTR_VHT_CAPABILITY_MASK
NL80211_ATTR_MDID
NL80211_ATTR_IE_RIC
NL80211_ATTR_CRIT_PROT_ID
NL80211_ATTR_MAX_CRIT_PROT_DURATION
NL80211_ATTR_PEER_AID
NL80211_ATTR_COALESCE_RULE
NL80211_ATTR_CH_SWITCH_COUNT
NL80211_ATTR_CH_SWITCH_BLOCK_TX
NL80211_ATTR_CSA_IES
NL80211_ATTR_CSA_C_OFF_BEACON
NL80211_ATTR_CSA_C_OFF_PRESP
NL80211_ATTR_RXMGMT_FLAGS
NL80211_ATTR_STA_SUPPORTED_CHANNELS
NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES
NL80211_ATTR_HANDLE_DFS
NL80211_ATTR_SUPPORT_5_MHZ
NL80211_ATTR_SUPPORT_10_MHZ
NL80211_ATTR_OPMODE_NOTIF
NL80211_ATTR_VENDOR_ID
NL80211_ATTR_VENDOR_SUBCMD
NL80211_ATTR_VENDOR_DATA
NL80211_ATTR_VENDOR_EVENTS
NL80211_ATTR_QOS_MAP
NL80211_ATTR_MAC_HINT
NL80211_ATTR_WIPHY_FREQ_HINT
NL80211_ATTR_MAX_AP_ASSOC_STA
NL80211_ATTR_TDLS_PEER_CAPABILITY
NL80211_ATTR_SOCKET_OWNER
NL80211_ATTR_CSA_C_OFFSETS_TX
NL80211_ATTR_MAX_CSA_COUNTERS
NL80211_ATTR_TDLS_INITIATOR
NL80211_ATTR_USE_RRM
NL80211_ATTR_WIPHY_DYN_ACK
NL80211_ATTR_TSID
NL80211_ATTR_USER_PRIO
NL80211_ATTR_ADMITTED_TIME
NL80211_ATTR_SMPS_MODE
NL80211_ATTR_OPER_CLASS
NL80211_ATTR_MAC_MASK
NL80211_ATTR_WIPHY_SELF_MANAGED_REG
NL80211_ATTR_EXT_FEATURES
NL80211_ATTR_SURVEY_RADIO_STATS
NL80211_ATTR_NETNS_FD
NL80211_ATTR_SCHED_SCAN_DELAY
NL80211_ATTR_REG_INDOOR
NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS
NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL
NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS
NL80211_ATTR_SCHED_SCAN_PLANS
NL80211_ATTR_PBSS
NL80211_ATTR_BSS_SELECT
NL80211_ATTR_STA_SUPPORT_P2P_PS
NL80211_ATTR_PAD
NL80211_ATTR_IFTYPE_EXT_CAPA
NL80211_ATTR_MU_MIMO_GROUP_DATA
NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR
NL80211_ATTR_SCAN_START_TIME_TSF
NL80211_ATTR_SCAN_START_TIME_TSF_BSSID
NL80211_ATTR_MEASUREMENT_DURATION
NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY
NL80211_ATTR_MESH_PEER_AID
NL80211_ATTR_NAN_MASTER_PREF
NL80211_ATTR_NAN_DUAL
NL80211_ATTR_NAN_FUNC
NL80211_ATTR_NAN_MATCH
__NL80211_ATTR_AFTER_LAST
NUM_NL80211_ATTR
NL80211_ATTR_MAX

Definition at line 1957 of file nl80211-new.h.

◆ nl80211_auth_type

enum nl80211_auth_type

enum nl80211_auth_type - AuthenticationType

: Open System authentication : Shared Key authentication (WEP only) : Fast BSS Transition (IEEE 802.11r) : Network EAP (some Cisco APs and mainly LEAP) : Simultaneous authentication of equals : internal : maximum valid auth algorithm : determine automatically (if necessary by trying multiple times); this is invalid in netlink – leave out the attribute for this on CONNECT commands.

Enumerator
NL80211_AUTHTYPE_OPEN_SYSTEM
NL80211_AUTHTYPE_SHARED_KEY
NL80211_AUTHTYPE_FT
NL80211_AUTHTYPE_NETWORK_EAP
NL80211_AUTHTYPE_SAE
__NL80211_AUTHTYPE_NUM
NL80211_AUTHTYPE_MAX
NL80211_AUTHTYPE_AUTOMATIC

Definition at line 3682 of file nl80211-new.h.

◆ nl80211_band

enum nl80211_band

enum nl80211_band - Frequency band : 2.4 GHz ISM band : around 5 GHz band (4.9 - 5.7 GHz) : around 60 GHz band (58.32 - 64.80 GHz) : number of bands, avoid using this in userspace since newer kernel versions may support more bands

Enumerator
NL80211_BAND_2GHZ
NL80211_BAND_5GHZ
NL80211_BAND_60GHZ
NUM_NL80211_BANDS

Definition at line 3832 of file nl80211-new.h.

◆ nl80211_band_attr

enum nl80211_band_attr

enum nl80211_band_attr - band attributes : attribute number 0 is reserved : supported frequencies in this band, an array of nested frequency attributes : supported bitrates in this band, an array of nested bitrate attributes : 16-byte attribute containing the MCS set as defined in 802.11n : HT capabilities, as in the HT information IE : A-MPDU factor, as in 11n : A-MPDU density, as in 11n : 32-byte attribute containing the MCS set as defined in 802.11ac : VHT capabilities, as in the HT information IE : highest band attribute currently defined : internal use

Enumerator
__NL80211_BAND_ATTR_INVALID
NL80211_BAND_ATTR_FREQS
NL80211_BAND_ATTR_RATES
NL80211_BAND_ATTR_HT_MCS_SET
NL80211_BAND_ATTR_HT_CAPA
NL80211_BAND_ATTR_HT_AMPDU_FACTOR
NL80211_BAND_ATTR_HT_AMPDU_DENSITY
NL80211_BAND_ATTR_VHT_MCS_SET
NL80211_BAND_ATTR_VHT_CAPA
__NL80211_BAND_ATTR_AFTER_LAST
NL80211_BAND_ATTR_MAX

Definition at line 2811 of file nl80211-new.h.

◆ nl80211_bitrate_attr

enum nl80211_bitrate_attr

enum nl80211_bitrate_attr - bitrate attributes : attribute number 0 is reserved : Bitrate in units of 100 kbps : Short preamble supported in 2.4 GHz band. : highest bitrate attribute number currently defined : internal use

Enumerator
__NL80211_BITRATE_ATTR_INVALID
NL80211_BITRATE_ATTR_RATE
NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE
__NL80211_BITRATE_ATTR_AFTER_LAST
NL80211_BITRATE_ATTR_MAX

Definition at line 2931 of file nl80211-new.h.

◆ nl80211_bss

enum nl80211_bss

enum nl80211_bss - netlink attributes for a BSS

: invalid : BSSID of the BSS (6 octets) : frequency in MHz (u32) : TSF of the received probe response/beacon (u64) (if is present then this is known to be from a probe response, otherwise it may be from the same beacon that the NL80211_BSS_BEACON_TSF will be from) : beacon interval of the (I)BSS (u16) : capability field (CPU order, u16) : binary attribute containing the raw information elements from the probe response/beacon (bin); if the NL80211_BSS_BEACON_IES attribute is present and the data is different then the IEs here are from a Probe Response frame; otherwise they are from a Beacon frame. However, if the driver does not indicate the source of the IEs, these IEs may be from either frame subtype. If present, the attribute indicates that the data here is known to be from a probe response, without any heuristics. : signal strength of probe response/beacon in mBm (100 * dBm) (s32) : signal strength of the probe response/beacon in unspecified units, scaled to 0..100 (u8) : status, if this BSS is "used" : age of this BSS entry in ms : binary attribute containing the raw information elements from a Beacon frame (bin); not present if no Beacon frame has yet been received : channel width of the control channel (u32, enum nl80211_bss_scan_width) : TSF of the last received beacon (u64) (not present if no beacon frame has been received yet) : the data in and is known to be from a probe response (flag attribute) : CLOCK_BOOTTIME timestamp when this entry was last updated by a received frame. The value is expected to be accurate to about 10ms. (u64, nanoseconds) : attribute used for padding for 64-bit alignment : the time at the start of reception of the first octet of the timestamp field of the last beacon/probe received for this BSS. The time is the TSF of the BSS specified by . (u64). : the BSS according to which is set. : internal : highest BSS attribute

Enumerator
__NL80211_BSS_INVALID
NL80211_BSS_BSSID
NL80211_BSS_FREQUENCY
NL80211_BSS_TSF
NL80211_BSS_BEACON_INTERVAL
NL80211_BSS_CAPABILITY
NL80211_BSS_INFORMATION_ELEMENTS
NL80211_BSS_SIGNAL_MBM
NL80211_BSS_SIGNAL_UNSPEC
NL80211_BSS_STATUS
NL80211_BSS_SEEN_MS_AGO
NL80211_BSS_BEACON_IES
NL80211_BSS_CHAN_WIDTH
NL80211_BSS_BEACON_TSF
NL80211_BSS_PRESP_DATA
NL80211_BSS_LAST_SEEN_BOOTTIME
NL80211_BSS_PAD
NL80211_BSS_PARENT_TSF
NL80211_BSS_PARENT_BSSID
__NL80211_BSS_AFTER_LAST
NL80211_BSS_MAX

Definition at line 3624 of file nl80211-new.h.

◆ nl80211_bss_scan_width

enum nl80211_bss_scan_width

enum nl80211_bss_scan_width - control channel width for a BSS

These values are used with the NL80211_BSS_CHAN_WIDTH attribute.

: control channel is 20 MHz wide or compatible : control channel is 10 MHz wide : control channel is 5 MHz wide

Enumerator
NL80211_BSS_CHAN_WIDTH_20
NL80211_BSS_CHAN_WIDTH_10
NL80211_BSS_CHAN_WIDTH_5

Definition at line 3569 of file nl80211-new.h.

◆ nl80211_bss_select_attr

enum nl80211_bss_select_attr

enum nl80211_bss_select_attr - attributes for bss selection.

: reserved. : Flag indicating only RSSI-based BSS selection is requested. : attribute indicating BSS selection should be done such that the specified band is preferred. When there are multiple BSS-es in the preferred band, the driver shall use RSSI-based BSS selection as a second step. The value of this attribute is according to &enum nl80211_band (u32). : When present the RSSI level for BSS-es in the specified band is to be adjusted before doing RSSI-based BSS selection. The attribute value is a packed structure value as specified by &struct nl80211_bss_select_rssi_adjust. : highest bss select attribute number. : internal use.

One and only one of these attributes are found within NL80211_ATTR_BSS_SELECT for NL80211_CMD_CONNECT. It specifies the required BSS selection behaviour which the driver shall use.

Enumerator
__NL80211_BSS_SELECT_ATTR_INVALID
NL80211_BSS_SELECT_ATTR_RSSI
NL80211_BSS_SELECT_ATTR_BAND_PREF
NL80211_BSS_SELECT_ATTR_RSSI_ADJUST
__NL80211_BSS_SELECT_ATTR_AFTER_LAST
NL80211_BSS_SELECT_ATTR_MAX

Definition at line 4946 of file nl80211-new.h.

◆ nl80211_bss_status

enum nl80211_bss_status

enum nl80211_bss_status - BSS "status" : Authenticated with this BSS. Note that this is no longer used since cfg80211 no longer keeps track of whether or not authentication was done with a given BSS. : Associated with this BSS. : Joined to this IBSS.

The BSS status is a BSS attribute in scan dumps, which indicates the status the interface has wrt. this BSS.

Enumerator
NL80211_BSS_STATUS_AUTHENTICATED
NL80211_BSS_STATUS_ASSOCIATED
NL80211_BSS_STATUS_IBSS_JOINED

Definition at line 3662 of file nl80211-new.h.

◆ nl80211_chan_width

enum nl80211_chan_width

enum nl80211_chan_width - channel width definitions

These values are used with the NL80211_ATTR_CHANNEL_WIDTH attribute.

: 20 MHz, non-HT channel : 20 MHz HT channel : 40 MHz channel, the NL80211_ATTR_CENTER_FREQ1 attribute must be provided as well : 80 MHz channel, the NL80211_ATTR_CENTER_FREQ1 attribute must be provided as well : 80+80 MHz channel, the NL80211_ATTR_CENTER_FREQ1 and NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well : 160 MHz channel, the NL80211_ATTR_CENTER_FREQ1 attribute must be provided as well : 5 MHz OFDM channel : 10 MHz OFDM channel

Enumerator
NL80211_CHAN_WIDTH_20_NOHT
NL80211_CHAN_WIDTH_20
NL80211_CHAN_WIDTH_40
NL80211_CHAN_WIDTH_80
NL80211_CHAN_WIDTH_80P80
NL80211_CHAN_WIDTH_160
NL80211_CHAN_WIDTH_5
NL80211_CHAN_WIDTH_10

Definition at line 3549 of file nl80211-new.h.

◆ nl80211_channel_type

enum nl80211_channel_type

enum nl80211_channel_type - channel type : 20 MHz, non-HT channel : 20 MHz HT channel : HT40 channel, secondary channel below the control channel : HT40 channel, secondary channel above the control channel

Enumerator
NL80211_CHAN_NO_HT
NL80211_CHAN_HT20
NL80211_CHAN_HT40MINUS
NL80211_CHAN_HT40PLUS

Definition at line 3523 of file nl80211-new.h.

◆ nl80211_coalesce_condition

enum nl80211_coalesce_condition

enum nl80211_coalesce_condition - coalesce rule conditions : coalaesce Rx packets when patterns in a rule are matched. : coalesce Rx packets when patterns in a rule are not matched.

Enumerator
NL80211_COALESCE_CONDITION_MATCH
NL80211_COALESCE_CONDITION_NO_MATCH

Definition at line 4251 of file nl80211-new.h.

◆ nl80211_commands

enum nl80211_commands

DOC: Station handling

Stations are added per interface, but a special case exists with VLAN interfaces. When a station is bound to an AP interface, it may be moved into a VLAN identified by a VLAN interface index (NL80211_ATTR_STA_VLAN). The station is still assumed to belong to the AP interface it was added to.

Station handling varies per interface type and depending on the driver's capabilities.

For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows:

a setup station entry is added, not yet authorized, without any rate or capability information, this just exists to avoid race conditions
when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid to add rate and capability information to the station and at the same time mark it authorized.
NL80211_TDLS_ENABLE_LINK is then used
after this, the only valid operation is to remove it by tearing down the TDLS link (NL80211_TDLS_DISABLE_LINK)

TODO: need more info for other interface types DOC: Frame transmission/registration support

Frame transmission and registration support exists to allow userspace management entities such as wpa_supplicant react to management frames that are not being handled by the kernel. This includes, for example, certain classes of action frames that cannot be handled in the kernel for various reasons.

Frame registration is done on a per-interface basis and registrations cannot be removed other than by closing the socket. It is possible to specify a registration filter to register, for example, only for a certain type of action frame. In particular with action frames, those that userspace registers for will not be returned as unhandled by the driver, so that the registered application has to take responsibility for doing that.

The type of frame that can be registered for is also dependent on the driver and interface type. The frame types are advertised in wiphy attributes so applications know what to expect.

NOTE: When an interface changes type while registrations are active, these registrations are ignored until the interface type is changed again. This means that changing the interface type can lead to a situation that couldn't otherwise be produced, but any such registrations will be dormant in the sense that they will not be serviced, i.e. they will not receive any frames.

Frame transmission allows userspace to send for example the required responses to action frames. It is subject to some sanity checking, but many frames can be transmitted. When a frame was transmitted, its status is indicated to the sending socket.

For more technical details, see the corresponding command descriptions below. DOC: Virtual interface / concurrency capabilities

Some devices are able to operate with virtual MACs, they can have more than one virtual interface. The capability handling for this is a bit complex though, as there may be a number of restrictions on the types of concurrency that are supported.

To start with, each device supports the interface types listed in the NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the types there no concurrency is implied.

Once concurrency is desired, more attributes must be observed: To start with, since some interface types are purely managed in software, like the AP-VLAN type in mac80211 for example, there's an additional list of these, they can be added at any time and are only restricted by some semantic restrictions (e.g. AP-VLAN cannot be added without a corresponding AP interface). This list is exported in the NL80211_ATTR_SOFTWARE_IFTYPES attribute.

Further, the list of supported combinations is exported. This is in the NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically, it exports a list of "groups", and at any point in time the interfaces that are currently active must fall into any one of the advertised groups. Within each group, there are restrictions on the number of interfaces of different types that are supported and also the number of different channels, along with potentially some other restrictions. See &enum nl80211_if_combination_attrs.

All together, these attributes define the concurrency of virtual interfaces that a given device supports. DOC: packet coalesce support

In most cases, host that receives IPv4 and IPv6 multicast/broadcast packets does not do anything with these packets. Therefore the reception of these unwanted packets causes unnecessary processing and power consumption.

Packet coalesce feature helps to reduce number of received interrupts to host by buffering these packets in firmware/hardware for some predefined time. Received interrupt will be generated when one of the following events occur. a) Expiration of hardware timer whose expiration time is set to maximum coalescing delay of matching coalesce rule. b) Coalescing buffer in hardware reaches it's limit. c) Packet doesn't match any of the configured coalesce rules.

User needs to configure following parameters for creating a coalesce rule. a) Maximum coalescing delay b) List of packet patterns which needs to be matched c) Condition for coalescence. pattern 'match' or 'no match' Multiple such rules can be created. enum nl80211_commands - supported nl80211 commands

: unspecified command to catch errors

: request information about a wiphy or dump request to get a list of all present wiphys. : set wiphy parameters, needs NL80211_ATTR_WIPHY or NL80211_ATTR_IFINDEX; can be used to set NL80211_ATTR_WIPHY_NAME, NL80211_ATTR_WIPHY_TXQ_PARAMS, NL80211_ATTR_WIPHY_FREQ (and the attributes determining the channel width; this is used for setting monitor mode channel), NL80211_ATTR_WIPHY_RETRY_SHORT, NL80211_ATTR_WIPHY_RETRY_LONG, NL80211_ATTR_WIPHY_FRAG_THRESHOLD, and/or NL80211_ATTR_WIPHY_RTS_THRESHOLD. However, for setting the channel, see NL80211_CMD_SET_CHANNEL instead, the support here is for backward compatibility only. : Newly created wiphy, response to get request or rename notification. Has attributes NL80211_ATTR_WIPHY and NL80211_ATTR_WIPHY_NAME. : Wiphy deleted. Has attributes NL80211_ATTR_WIPHY and NL80211_ATTR_WIPHY_NAME.

: Request an interface's configuration; either a dump request for all interfaces or a specific get with a single NL80211_ATTR_IFINDEX is supported. : Set type of a virtual interface, requires NL80211_ATTR_IFINDEX and NL80211_ATTR_IFTYPE. : Newly created virtual interface or response to NL80211_CMD_GET_INTERFACE. Has NL80211_ATTR_IFINDEX, NL80211_ATTR_WIPHY and NL80211_ATTR_IFTYPE attributes. Can also be sent from userspace to request creation of a new virtual interface, then requires attributes NL80211_ATTR_WIPHY, NL80211_ATTR_IFTYPE and NL80211_ATTR_IFNAME. : Virtual interface was deleted, has attributes NL80211_ATTR_IFINDEX and NL80211_ATTR_WIPHY. Can also be sent from userspace to request deletion of a virtual interface, then requires attribute NL80211_ATTR_IFINDEX.

: Get sequence counter information for a key specified by NL80211_ATTR_KEY_IDX and/or NL80211_ATTR_MAC. : Set key attributes NL80211_ATTR_KEY_DEFAULT, NL80211_ATTR_KEY_DEFAULT_MGMT, or NL80211_ATTR_KEY_THRESHOLD. : add a key with given NL80211_ATTR_KEY_DATA, NL80211_ATTR_KEY_IDX, NL80211_ATTR_MAC, NL80211_ATTR_KEY_CIPHER, and NL80211_ATTR_KEY_SEQ attributes. : delete a key identified by NL80211_ATTR_KEY_IDX or NL80211_ATTR_MAC.

: (not used) : change the beacon on an access point interface using the NL80211_ATTR_BEACON_HEAD and NL80211_ATTR_BEACON_TAIL attributes. For drivers that generate the beacon and probe responses internally, the following attributes must be provided: NL80211_ATTR_IE, NL80211_ATTR_IE_PROBE_RESP and NL80211_ATTR_IE_ASSOC_RESP. : Start AP operation on an AP interface, parameters are like for NL80211_CMD_SET_BEACON, and additionally parameters that do not change are used, these include NL80211_ATTR_BEACON_INTERVAL, NL80211_ATTR_DTIM_PERIOD, NL80211_ATTR_SSID, NL80211_ATTR_HIDDEN_SSID, NL80211_ATTR_CIPHERS_PAIRWISE, NL80211_ATTR_CIPHER_GROUP, NL80211_ATTR_WPA_VERSIONS, NL80211_ATTR_AKM_SUITES, NL80211_ATTR_PRIVACY, NL80211_ATTR_AUTH_TYPE, NL80211_ATTR_INACTIVITY_TIMEOUT, NL80211_ATTR_ACL_POLICY and NL80211_ATTR_MAC_ADDRS. The channel to use can be set on the interface or be given using the NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width. : old alias for NL80211_CMD_START_AP : Stop AP operation on the given interface : old alias for NL80211_CMD_STOP_AP

: Get station attributes for station identified by NL80211_ATTR_MAC on the interface identified by NL80211_ATTR_IFINDEX. : Set station attributes for station identified by NL80211_ATTR_MAC on the interface identified by NL80211_ATTR_IFINDEX. : Add a station with given attributes to the the interface identified by NL80211_ATTR_IFINDEX. : Remove a station identified by NL80211_ATTR_MAC or, if no MAC address given, all stations, on the interface identified by NL80211_ATTR_IFINDEX. NL80211_ATTR_MGMT_SUBTYPE and NL80211_ATTR_REASON_CODE can optionally be used to specify which type of disconnection indication should be sent to the station (Deauthentication or Disassociation frame and reason code for that frame).

: Get mesh path attributes for mesh path to destination NL80211_ATTR_MAC on the interface identified by NL80211_ATTR_IFINDEX. : Set mesh path attributes for mesh path to destination NL80211_ATTR_MAC on the interface identified by NL80211_ATTR_IFINDEX. : Create a new mesh path for the destination given by NL80211_ATTR_MAC via NL80211_ATTR_MPATH_NEXT_HOP. : Delete a mesh path to the destination given by NL80211_ATTR_MAC. : Add a mesh path with given attributes to the the interface identified by NL80211_ATTR_IFINDEX. : Remove a mesh path identified by NL80211_ATTR_MAC or, if no MAC address given, all mesh paths, on the interface identified by NL80211_ATTR_IFINDEX. : Set BSS attributes for BSS identified by NL80211_ATTR_IFINDEX.

: ask the wireless core to send us its currently set regulatory domain. If NL80211_ATTR_WIPHY is specified and the device has a private regulatory domain, it will be returned. Otherwise, the global regdomain will be returned. A device will have a private regulatory domain if it uses the regulatory_hint() API. Even when a private regdomain is used the channel information will still be mended according to further hints from the regulatory core to help with compliance. A dump version of this API is now available which will returns the global regdomain as well as all private regdomains of present wiphys (for those that have it). If a wiphy is self-managed (NL80211_ATTR_WIPHY_SELF_MANAGED_REG), then its private regdomain is the only valid one for it. The regulatory core is not used to help with compliance in this case. : Set current regulatory domain. CRDA sends this command after being queried by the kernel. CRDA replies by sending a regulatory domain structure which consists of NL80211_ATTR_REG_ALPHA set to our current alpha2 if it found a match. It also provides NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each regulatory rule is a nested set of attributes given by NL80211_ATTR_REG_RULE_FREQ_[START|END] and NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and NL80211_ATTR_REG_RULE_POWER_MAX_EIRP. : ask the wireless core to set the regulatory domain to the specified ISO/IEC 3166-1 alpha2 country code. The core will store this as a valid request and then query userspace for it.

: Get mesh networking properties for the interface identified by NL80211_ATTR_IFINDEX

: Set mesh networking properties for the interface identified by NL80211_ATTR_IFINDEX

: Set extra IEs for management frames. The interface is identified with NL80211_ATTR_IFINDEX and the management frame subtype with NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be added to the end of the specified management frame is specified with NL80211_ATTR_IE. If the command succeeds, the requested data will be added to all specified management frames generated by kernel/firmware/driver. Note: This command has been removed and it is only reserved at this point to avoid re-using existing command number. The functionality this command was planned for has been provided with cleaner design with the option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN, NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE, NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE.

: get scan results : trigger a new scan with the given parameters NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the probe requests at CCK rate or not. NL80211_ATTR_MAC can be used to specify a BSSID to scan for; if not included, the wildcard BSSID will be used. : scan notification (as a reply to NL80211_CMD_GET_SCAN and on the "scan" multicast group) : scan was aborted, for unspecified reasons, partial scan results may be available

: start a scheduled scan at certain intervals and certain number of cycles, as specified by NL80211_ATTR_SCHED_SCAN_PLANS. If NL80211_ATTR_SCHED_SCAN_PLANS is not specified and only NL80211_ATTR_SCHED_SCAN_INTERVAL is specified, scheduled scan will run in an infinite loop with the specified interval. These attributes are mutually exculsive, i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if NL80211_ATTR_SCHED_SCAN_PLANS is defined. If for some reason scheduled scan is aborted by the driver, all scan plans are canceled (including scan plans that did not start yet). Like with normal scans, if SSIDs (NL80211_ATTR_SCAN_SSIDS) are passed, they are used in the probe requests. For broadcast, a broadcast SSID must be passed (ie. an empty string). If no SSID is passed, no probe requests are sent and a passive scan is performed. NL80211_ATTR_SCAN_FREQUENCIES, if passed, define which channels should be scanned; if not passed, all channels allowed for the current regulatory domain are used. Extra IEs can also be passed from the userspace by using the NL80211_ATTR_IE attribute. The first cycle of the scheduled scan can be delayed by NL80211_ATTR_SCHED_SCAN_DELAY is supplied. : stop a scheduled scan. Returns -ENOENT if scheduled scan is not running. The caller may assume that as soon as the call returns, it is safe to start a new scheduled scan again. : indicates that there are scheduled scan results available. : indicates that the scheduled scan has stopped. The driver may issue this event at any time during a scheduled scan. One reason for stopping the scan is if the hardware does not support starting an association or a normal scan while running a scheduled scan. This event is also sent when the NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface is brought down while a scheduled scan was running.

: get survey resuls, e.g. channel occupation or noise level : survey data notification (as a reply to NL80211_CMD_GET_SURVEY and on the "scan" multicast group)

: Add a PMKSA cache entry, using NL80211_ATTR_MAC (for the BSSID) and NL80211_ATTR_PMKID. : Delete a PMKSA cache entry, using NL80211_ATTR_MAC (for the BSSID) and NL80211_ATTR_PMKID. : Flush all PMKSA cache entries.

: indicates to userspace the regulatory domain has been changed and provides details of the request information that caused the change such as who initiated the regulatory request (NL80211_ATTR_REG_INITIATOR), the wiphy_idx (NL80211_ATTR_REG_ALPHA2) on which the request was made from if the initiator was NL80211_REGDOM_SET_BY_COUNTRY_IE or NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain set (NL80211_ATTR_REG_TYPE), if the type of regulatory domain is NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on to (NL80211_ATTR_REG_ALPHA2). : indicates to userspace that an AP beacon has been found while world roaming thus enabling active scan or any mode of operation that initiates TX (beacons) on a channel where we would not have been able to do either before. As an example if you are world roaming (regulatory domain set to world or if your driver is using a custom world roaming regulatory domain) and while doing a passive scan on the 5 GHz band you find an AP there (if not on a DFS channel) you will now be able to actively scan for that AP or use AP mode on your card on that same channel. Note that this will never be used for channels 1-11 on the 2 GHz band as they are always enabled world wide. This beacon hint is only sent if your device had either disabled active scanning or beaconing on a channel. We send to userspace the wiphy on which we removed a restriction from (NL80211_ATTR_WIPHY) and the channel on which this occurred before (NL80211_ATTR_FREQ_BEFORE) and after (NL80211_ATTR_FREQ_AFTER) the beacon hint was processed.

: authentication request and notification. This command is used both as a command (request to authenticate) and as an event on the "mlme" multicast group indicating completion of the authentication process. When used as a command, NL80211_ATTR_IFINDEX is used to identify the interface. NL80211_ATTR_MAC is used to specify PeerSTAAddress (and BSSID in case of station mode). NL80211_ATTR_SSID is used to specify the SSID (mainly for association, but is included in authentication request, too, to help BSS selection. NL80211_ATTR_WIPHY_FREQ is used to specify the frequence of the channel in MHz. NL80211_ATTR_AUTH_TYPE is used to specify the authentication type. NL80211_ATTR_IE is used to define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs) to be added to the frame. When used as an event, this reports reception of an Authentication frame in station and IBSS modes when the local MLME processed the frame, i.e., it was for the local STA and was received in correct state. This is similar to MLME-AUTHENTICATE.confirm primitive in the MLME SAP interface (kernel providing MLME, userspace SME). The included NL80211_ATTR_FRAME attribute contains the management frame (including both the header and frame body, but not FCS). This event is also used to indicate if the authentication attempt timed out. In that case the NL80211_ATTR_FRAME attribute is replaced with a NL80211_ATTR_TIMED_OUT flag (and NL80211_ATTR_MAC to indicate which pending authentication timed out). : association request and notification; like NL80211_CMD_AUTHENTICATE but for Association and Reassociation (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request, MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). The NL80211_ATTR_PREV_BSSID attribute is used to specify whether the request is for the initial association to an ESS (that attribute not included) or for reassociation within the ESS (that attribute is included). : deauthentication request and notification; like NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication primitives). : disassociation request and notification; like NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives).

: notification of a locally detected Michael MIC (part of TKIP) failure; sent on the "mlme" multicast group; the event includes NL80211_ATTR_MAC to describe the source MAC address of the frame with invalid MIC, NL80211_ATTR_KEY_TYPE to show the key type, NL80211_ATTR_KEY_IDX to indicate the key identifier, and NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this event matches with MLME-MICHAELMICFAILURE.indication() primitive

: Join a new IBSS – given at least an SSID and a FREQ attribute (for the initial frequency if no peer can be found) and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those should be fixed rather than automatically determined. Can only be executed on a network interface that is UP, and fixed BSSID/FREQ may be rejected. Another optional parameter is the beacon interval, given in the NL80211_ATTR_BEACON_INTERVAL attribute, which if not given defaults to 100 TU (102.4ms). : Leave the IBSS – no special arguments, the IBSS is determined by the network interface.

: testmode command, takes a wiphy (or ifindex) attribute to identify the device, and the TESTDATA blob attribute to pass through to the driver.

: connection request and notification; this command requests to connect to a specified network but without separating auth and assoc steps. For this, you need to specify the SSID in a NL80211_ATTR_SSID attribute, and can optionally specify the association IEs in NL80211_ATTR_IE, NL80211_ATTR_AUTH_TYPE, NL80211_ATTR_USE_MFP, NL80211_ATTR_MAC, NL80211_ATTR_WIPHY_FREQ, NL80211_ATTR_CONTROL_PORT, NL80211_ATTR_CONTROL_PORT_ETHERTYPE, NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, NL80211_ATTR_MAC_HINT, and NL80211_ATTR_WIPHY_FREQ_HINT. If included, NL80211_ATTR_MAC and NL80211_ATTR_WIPHY_FREQ are restrictions on BSS selection, i.e., they effectively prevent roaming within the ESS. NL80211_ATTR_MAC_HINT and NL80211_ATTR_WIPHY_FREQ_HINT can be included to provide a recommendation of the initial BSS while allowing the driver to roam to other BSSes within the ESS and also to ignore this recommendation if the indicated BSS is not ideal. Only one set of BSSID,frequency parameters is used (i.e., either the enforcing NL80211_ATTR_MAC,NL80211_ATTR_WIPHY_FREQ or the less strict NL80211_ATTR_MAC_HINT and NL80211_ATTR_WIPHY_FREQ_HINT). NL80211_ATTR_PREV_BSSID can be used to request a reassociation within the ESS in case the device is already associated and an association with a different BSS is desired. Background scan period can optionally be specified in NL80211_ATTR_BG_SCAN_PERIOD, if not specified default background scan configuration in driver is used and if period value is 0, bg scan will be disabled. This attribute is ignored if driver does not support roam scan. It is also sent as an event, with the BSSID and response IEs when the connection is established or failed to be established. This can be determined by the NL80211_ATTR_STATUS_CODE attribute (0 = success, non-zero = failure). If NL80211_ATTR_TIMED_OUT is included in the event, the connection attempt failed due to not being able to initiate authentication/association or not receiving a response from the AP. Non-zero NL80211_ATTR_STATUS_CODE value is indicated in that case as well to remain backwards compatible. : request that the card roam (currently not implemented), sent as an event when the card/driver roamed by itself. : drop a given connection; also used to notify userspace that a connection was dropped by the AP or due to other reasons, for this the NL80211_ATTR_DISCONNECTED_BY_AP and NL80211_ATTR_REASON_CODE attributes are used.

: Set a wiphy's netns. Note that all devices associated with this wiphy must be down and will follow.

: Request to remain awake on the specified channel for the specified amount of time. This can be used to do off-channel operations like transmit a Public Action frame and wait for a response while being associated to an AP on another channel. NL80211_ATTR_IFINDEX is used to specify which interface (and thus radio) is used. NL80211_ATTR_WIPHY_FREQ is used to specify the frequency for the operation. NL80211_ATTR_DURATION is used to specify the duration in milliseconds to remain on the channel. This command is also used as an event to notify when the requested duration starts (it may take a while for the driver to schedule this time due to other concurrent needs for the radio). When called, this operation returns a cookie (NL80211_ATTR_COOKIE) that will be included with any events pertaining to this request; the cookie is also used to cancel the request. : This command can be used to cancel a pending remain-on-channel duration if the desired operation has been completed prior to expiration of the originally requested duration. NL80211_ATTR_WIPHY or NL80211_ATTR_IFINDEX is used to specify the radio. The NL80211_ATTR_COOKIE attribute must be given as well to uniquely identify the request. This command is also used as an event to notify when a requested remain-on-channel duration has expired.

: Set the mask of rates to be used in TX rate selection. NL80211_ATTR_IFINDEX is used to specify the interface and the set of allowed rates.

: Register for receiving certain mgmt frames (via ) for processing in userspace. This command requires an interface index, a frame type attribute (optional for backward compatibility reasons, if not given assumes action frames) and a match attribute containing the first few bytes of the frame that should match, e.g. a single byte for only a category match or four bytes for vendor frames including the OUI. The registration cannot be dropped, but is removed automatically when the netlink socket is closed. Multiple registrations can be made. : Alias for for backward compatibility : Management frame TX request and RX notification. This command is used both as a request to transmit a management frame and as an event indicating reception of a frame that was not processed in kernel code, but is for us (i.e., which may need to be processed in a user space application). NL80211_ATTR_FRAME is used to specify the frame contents (including header). NL80211_ATTR_WIPHY_FREQ is used to indicate on which channel the frame is to be transmitted or was received. If this channel is not the current channel (remain-on-channel or the operational channel) the device will switch to the given channel and transmit the frame, optionally waiting for a response for the time specified using NL80211_ATTR_DURATION. When called, this operation returns a cookie (NL80211_ATTR_COOKIE) that will be included with the TX status event pertaining to the TX request. NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the management frames at CCK rate or not in 2GHz band. NL80211_ATTR_CSA_C_OFFSETS_TX is an array of offsets to CSA counters which will be updated to the current value. This attribute is used during CSA period. : When an off-channel TX was requested, this command may be used with the corresponding cookie to cancel the wait time if it is known that it is no longer necessary. : Alias for for backward compatibility. : Report TX status of a management frame transmitted with NL80211_CMD_FRAME. NL80211_ATTR_COOKIE identifies the TX command and NL80211_ATTR_FRAME includes the contents of the frame. NL80211_ATTR_ACK flag is included if the recipient acknowledged the frame. : Alias for for backward compatibility.

: Set powersave, using NL80211_ATTR_PS_STATE : Get powersave status in NL80211_ATTR_PS_STATE

: Connection quality monitor configuration. This command is used to configure connection quality monitoring notification trigger levels. : Connection quality monitor notification. This command is used as an event to indicate the that a trigger level was reached. : Set the channel (using NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width) the given interface (identifed by NL80211_ATTR_IFINDEX) shall operate on. In case multiple channels are supported by the device, the mechanism with which it switches channels is implementation-defined. When a monitor interface is given, it can only switch channel while no other interfaces are operating to avoid disturbing the operation of any other interfaces, and other interfaces will again take precedence when they are used.

: Set the MAC address of the peer on a WDS interface.

: Join a mesh. The mesh ID must be given, and initial mesh config parameters may be given. : Leave the mesh network – no special arguments, the network is determined by the network interface.

: Unprotected deauthentication frame notification. This event is used to indicate that an unprotected deauthentication frame was dropped when MFP is in use. : Unprotected disassociation frame notification. This event is used to indicate that an unprotected disassociation frame was dropped when MFP is in use.

: Notification on the reception of a beacon or probe response from a compatible mesh peer. This is only sent while no station information (sta_info) exists for the new peer candidate and when , , or is set. On reception of this notification, userspace may decide to create a new station (). To stop this notification from reoccurring, the userspace authentication daemon may want to create the new station with the AUTHENTICATED flag unset and maybe change it later depending on the authentication result.

: get Wake-on-Wireless-LAN (WoWLAN) settings. : set Wake-on-Wireless-LAN (WoWLAN) settings. Since wireless is more complex than wired ethernet, it supports various triggers. These triggers can be configured through this command with the NL80211_ATTR_WOWLAN_TRIGGERS attribute. For more background information, see http://wireless.kernel.org/en/users/Documentation/WoWLAN. The command can also be used as a notification from the driver reporting the wakeup reason. In this case, the attribute will contain the reason for the wakeup, if it was caused by wireless. If it is not present in the wakeup notification, the wireless device didn't cause the wakeup but reports that it was woken up.

: This command is used give the driver the necessary information for supporting GTK rekey offload. This feature is typically used during WoWLAN. The configuration data is contained in NL80211_ATTR_REKEY_DATA (which is nested and contains the data in sub-attributes). After rekeying happened, this command may also be sent by the driver as an MLME event to inform userspace of the new replay counter.

: This is used as an event to inform userspace of PMKSA caching dandidates.

: Perform a high-level TDLS command (e.g. link setup). In addition, this can be used as an event to request userspace to take actions on TDLS links (set up a new link or tear down an existing one). In such events, NL80211_ATTR_TDLS_OPERATION indicates the requested operation, NL80211_ATTR_MAC contains the peer MAC address, and NL80211_ATTR_REASON_CODE the reason code to be used (only with NL80211_TDLS_TEARDOWN). : Send a TDLS management frame. The NL80211_ATTR_TDLS_ACTION attribute determines the type of frame to be sent. Public Action codes (802.11-2012 8.1.5.1) will be sent as 802.11 management frames, while TDLS action codes (802.11-2012 8.5.13.1) will be encapsulated and sent as data frames. The currently supported Public Action code is WLAN_PUB_ACTION_TDLS_DISCOVER_RES and the currently supported TDLS actions codes are given in &enum ieee80211_tdls_actioncode.

: Used by an application controlling an AP (or GO) interface (i.e. hostapd) to ask for unexpected frames to implement sending deauth to stations that send unexpected class 3 frames. Also used as the event sent by the kernel when such a frame is received. For the event, the NL80211_ATTR_MAC attribute carries the TA and other attributes like the interface index are present. If used as the command it must have an interface index and you can only unsubscribe from the event by closing the socket. Subscription is also for NL80211_CMD_UNEXPECTED_4ADDR_FRAME events.

: Sent as an event indicating that the associated station identified by NL80211_ATTR_MAC sent a 4addr frame and wasn't already in a 4-addr VLAN. The event will be sent similarly to the NL80211_CMD_UNEXPECTED_FRAME event, to the same listener.

: Probe an associated station on an AP interface by sending a null data frame to it and reporting when the frame is acknowleged. This is used to allow timing out inactive clients. Uses NL80211_ATTR_IFINDEX and NL80211_ATTR_MAC. The command returns a direct reply with an NL80211_ATTR_COOKIE that is later used to match up the event with the request. The event includes the same data and has NL80211_ATTR_ACK set if the frame was ACKed.

: Register this socket to receive beacons from other BSSes when any interfaces are in AP mode. This helps implement OLBC handling in hostapd. Beacons are reported in NL80211_CMD_FRAME messages. Note that per PHY only one application may register.

: sets a bitmap for the individual TIDs whether No Acknowledgement Policy should be applied.

: An AP or GO may decide to switch channels independently of the userspace SME, send this event indicating NL80211_ATTR_IFINDEX is now on NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width. This indication may also be sent when a remotely-initiated switch (e.g., when a STA receives a CSA from the remote AP) is completed;

: Notify that a channel switch has been started on an interface, regardless of the initiator (ie. whether it was requested from a remote device or initiated on our own). It indicates that NL80211_ATTR_IFINDEX will be on NL80211_ATTR_WIPHY_FREQ after NL80211_ATTR_CH_SWITCH_COUNT TBTT's. The userspace may decide to react to this indication by requesting other interfaces to change channel as well.

: Start the given P2P Device, identified by its NL80211_ATTR_WDEV identifier. It must have been created with NL80211_CMD_NEW_INTERFACE previously. After it has been started, the P2P Device can be used for P2P operations, e.g. remain-on-channel and public action frame TX. : Stop the given P2P Device, identified by its NL80211_ATTR_WDEV identifier.

: connection request to an AP failed; used to notify userspace that AP has rejected the connection request from a station, due to particular reason. NL80211_ATTR_CONN_FAILED_REASON is used for this.

: Change the rate used to send multicast frames for IBSS or MESH vif.

: sets ACL for MAC address based access control. This is to be used with the drivers advertising the support of MAC address based access control. List of MAC addresses is passed in NL80211_ATTR_MAC_ADDRS and ACL policy is passed in NL80211_ATTR_ACL_POLICY. Driver will enable ACL with this list, if it is not already done. The new list will replace any existing list. Driver will clear its ACL when the list of MAC addresses passed is empty. This command is used in AP/P2P GO mode. Driver has to make sure to clear its ACL list during NL80211_CMD_STOP_AP.

: Start a Channel availability check (CAC). Once a radar is detected or the channel availability scan (CAC) has finished or was aborted, or a radar was detected, usermode will be notified with this event. This command is also used to notify userspace about radars while operating on this channel. NL80211_ATTR_RADAR_EVENT is used to inform about the type of the event.

: Get global nl80211 protocol features, i.e. features for the nl80211 protocol rather than device features. Returns the features in the NL80211_ATTR_PROTOCOL_FEATURES bitmap.

: Pass down the most up-to-date Fast Transition Information Element to the WLAN driver

: Send a Fast transition event from the WLAN driver to the supplicant. This will carry the target AP's MAC address along with the relevant Information Elements. This event is used to report received FT IEs (MDIE, FTIE, RSN IE, TIE, RICIE).

: Indicates user-space will start running a critical protocol that needs more reliability in the connection to complete.

: Indicates the connection reliability can return back to normal.

: Get currently supported coalesce rules. : Configure coalesce rules or clear existing rules.

: Perform a channel switch by announcing the the new channel information (Channel Switch Announcement - CSA) in the beacon for some time (as defined in the NL80211_ATTR_CH_SWITCH_COUNT parameter) and then change to the new channel. Userspace provides the new channel information (using NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width). NL80211_ATTR_CH_SWITCH_BLOCK_TX may be supplied to inform other station that transmission must be blocked until the channel switch is complete.

: Vendor-specified command/event. The command is specified by the NL80211_ATTR_VENDOR_ID attribute and a sub-command in NL80211_ATTR_VENDOR_SUBCMD. Parameter(s) can be transported in NL80211_ATTR_VENDOR_DATA. For feature advertisement, the NL80211_ATTR_VENDOR_DATA attribute is used in the wiphy data as a nested attribute containing descriptions (&struct nl80211_vendor_cmd_info) of the supported vendor commands. This may also be sent as an event with the same attributes.

: Set Interworking QoS mapping for IP DSCP values. The QoS mapping information is included in NL80211_ATTR_QOS_MAP. If that attribute is not included, QoS mapping is disabled. Since this QoS mapping is relevant for IP packets, it is only valid during an association. This is cleared on disassociation and AP restart.

: Ask the kernel to add a traffic stream for the given NL80211_ATTR_TSID and NL80211_ATTR_MAC with NL80211_ATTR_USER_PRIO and NL80211_ATTR_ADMITTED_TIME parameters. Note that the action frame handshake with the AP shall be handled by userspace via the normal management RX/TX framework, this only sets up the TX TS in the driver/device. If the admitted time attribute is not added then the request just checks if a subsequent setup could be successful, the intent is to use this to avoid setting up a session with the AP when local restrictions would make that impossible. However, the subsequent "real" setup may still fail even if the check was successful. : Remove an existing TS with the NL80211_ATTR_TSID and NL80211_ATTR_MAC parameters. It isn't necessary to call this before removing a station entry entirely, or before disassociating or similar, cleanup will happen in the driver/device in this case.

: Get mesh path attributes for mesh proxy path to destination NL80211_ATTR_MAC on the interface identified by NL80211_ATTR_IFINDEX.

: Join the OCB network. The center frequency and bandwidth of a channel must be given. : Leave the OCB network – no special arguments, the network is determined by the network interface.

: Start channel-switching with a TDLS peer, identified by the NL80211_ATTR_MAC parameter. A target channel is provided via NL80211_ATTR_WIPHY_FREQ and other attributes determining channel width/type. The target operating class is given via NL80211_ATTR_OPER_CLASS. The driver is responsible for continually initiating channel-switching operations and returning to the base channel for communication with the AP. : Stop channel-switching with a TDLS peer given by NL80211_ATTR_MAC. Both peers must be on the base channel when this command completes.

: Similar to NL80211_CMD_REG_CHANGE, but used as an event to indicate changes for devices with wiphy-specific regdom management.

: Stop an ongoing scan. Returns -ENOENT if a scan is not running. The driver indicates the status of the scan through cfg80211_scan_done().

: Start NAN operation, identified by its NL80211_ATTR_WDEV interface. This interface must have been previously created with NL80211_CMD_NEW_INTERFACE. After it has been started, the NAN interface will create or join a cluster. This command must have a valid NL80211_ATTR_NAN_MASTER_PREF attribute and optional NL80211_ATTR_NAN_DUAL attributes. After this command NAN functions can be added. : Stop the NAN operation, identified by its NL80211_ATTR_WDEV interface. : Add a NAN function. The function is defined with NL80211_ATTR_NAN_FUNC nested attribute. When called, this operation returns the strictly positive and unique instance id (NL80211_ATTR_NAN_FUNC_INST_ID) and a cookie (NL80211_ATTR_COOKIE) of the function upon success. Since instance ID's can be re-used, this cookie is the right way to identify the function. This will avoid races when a termination event is handled by the user space after it has already added a new function that got the same instance id from the kernel as the one which just terminated. This cookie may be used in NAN events even before the command returns, so userspace shouldn't process NAN events until it processes the response to this command. Look at NL80211_ATTR_SOCKET_OWNER as well. : Delete a NAN function by cookie. This command is also used as a notification sent when a NAN function is terminated. This will contain a NL80211_ATTR_NAN_FUNC_INST_ID and NL80211_ATTR_COOKIE attributes. : Change current NAN configuration. NAN must be operational (NL80211_CMD_START_NAN was executed). It must contain at least one of the following attributes: NL80211_ATTR_NAN_MASTER_PREF, NL80211_ATTR_NAN_DUAL. : Notification sent when a match is reported. This will contain a NL80211_ATTR_NAN_MATCH nested attribute and NL80211_ATTR_COOKIE.

: highest used command number : internal use

Enumerator
NL80211_CMD_UNSPEC
NL80211_CMD_GET_WIPHY
NL80211_CMD_SET_WIPHY
NL80211_CMD_NEW_WIPHY
NL80211_CMD_DEL_WIPHY
NL80211_CMD_GET_INTERFACE
NL80211_CMD_SET_INTERFACE
NL80211_CMD_NEW_INTERFACE
NL80211_CMD_DEL_INTERFACE
NL80211_CMD_GET_KEY
NL80211_CMD_SET_KEY
NL80211_CMD_NEW_KEY
NL80211_CMD_DEL_KEY
NL80211_CMD_GET_BEACON
NL80211_CMD_SET_BEACON
NL80211_CMD_START_AP
NL80211_CMD_NEW_BEACON
NL80211_CMD_STOP_AP
NL80211_CMD_DEL_BEACON
NL80211_CMD_GET_STATION
NL80211_CMD_SET_STATION
NL80211_CMD_NEW_STATION
NL80211_CMD_DEL_STATION
NL80211_CMD_GET_MPATH
NL80211_CMD_SET_MPATH
NL80211_CMD_NEW_MPATH
NL80211_CMD_DEL_MPATH
NL80211_CMD_SET_BSS
NL80211_CMD_SET_REG
NL80211_CMD_REQ_SET_REG
NL80211_CMD_GET_MESH_CONFIG
NL80211_CMD_SET_MESH_CONFIG
NL80211_CMD_SET_MGMT_EXTRA_IE
NL80211_CMD_GET_REG
NL80211_CMD_GET_SCAN
NL80211_CMD_TRIGGER_SCAN
NL80211_CMD_NEW_SCAN_RESULTS
NL80211_CMD_SCAN_ABORTED
NL80211_CMD_REG_CHANGE
NL80211_CMD_AUTHENTICATE
NL80211_CMD_ASSOCIATE
NL80211_CMD_DEAUTHENTICATE
NL80211_CMD_DISASSOCIATE
NL80211_CMD_MICHAEL_MIC_FAILURE
NL80211_CMD_REG_BEACON_HINT
NL80211_CMD_JOIN_IBSS
NL80211_CMD_LEAVE_IBSS
NL80211_CMD_TESTMODE
NL80211_CMD_CONNECT
NL80211_CMD_ROAM
NL80211_CMD_DISCONNECT
NL80211_CMD_SET_WIPHY_NETNS
NL80211_CMD_GET_SURVEY
NL80211_CMD_NEW_SURVEY_RESULTS
NL80211_CMD_SET_PMKSA
NL80211_CMD_DEL_PMKSA
NL80211_CMD_FLUSH_PMKSA
NL80211_CMD_REMAIN_ON_CHANNEL
NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL
NL80211_CMD_SET_TX_BITRATE_MASK
NL80211_CMD_REGISTER_FRAME
NL80211_CMD_REGISTER_ACTION
NL80211_CMD_FRAME
NL80211_CMD_ACTION
NL80211_CMD_FRAME_TX_STATUS
NL80211_CMD_ACTION_TX_STATUS
NL80211_CMD_SET_POWER_SAVE
NL80211_CMD_GET_POWER_SAVE
NL80211_CMD_SET_CQM
NL80211_CMD_NOTIFY_CQM
NL80211_CMD_SET_CHANNEL
NL80211_CMD_SET_WDS_PEER
NL80211_CMD_FRAME_WAIT_CANCEL
NL80211_CMD_JOIN_MESH
NL80211_CMD_LEAVE_MESH
NL80211_CMD_UNPROT_DEAUTHENTICATE
NL80211_CMD_UNPROT_DISASSOCIATE
NL80211_CMD_NEW_PEER_CANDIDATE
NL80211_CMD_GET_WOWLAN
NL80211_CMD_SET_WOWLAN
NL80211_CMD_START_SCHED_SCAN
NL80211_CMD_STOP_SCHED_SCAN
NL80211_CMD_SCHED_SCAN_RESULTS
NL80211_CMD_SCHED_SCAN_STOPPED
NL80211_CMD_SET_REKEY_OFFLOAD
NL80211_CMD_PMKSA_CANDIDATE
NL80211_CMD_TDLS_OPER
NL80211_CMD_TDLS_MGMT
NL80211_CMD_UNEXPECTED_FRAME
NL80211_CMD_PROBE_CLIENT
NL80211_CMD_REGISTER_BEACONS
NL80211_CMD_UNEXPECTED_4ADDR_FRAME
NL80211_CMD_SET_NOACK_MAP
NL80211_CMD_CH_SWITCH_NOTIFY
NL80211_CMD_START_P2P_DEVICE
NL80211_CMD_STOP_P2P_DEVICE
NL80211_CMD_CONN_FAILED
NL80211_CMD_SET_MCAST_RATE
NL80211_CMD_SET_MAC_ACL
NL80211_CMD_RADAR_DETECT
NL80211_CMD_GET_PROTOCOL_FEATURES
NL80211_CMD_UPDATE_FT_IES
NL80211_CMD_FT_EVENT
NL80211_CMD_CRIT_PROTOCOL_START
NL80211_CMD_CRIT_PROTOCOL_STOP
NL80211_CMD_GET_COALESCE
NL80211_CMD_SET_COALESCE
NL80211_CMD_CHANNEL_SWITCH
NL80211_CMD_VENDOR
NL80211_CMD_SET_QOS_MAP
NL80211_CMD_ADD_TX_TS
NL80211_CMD_DEL_TX_TS
NL80211_CMD_GET_MPP
NL80211_CMD_JOIN_OCB
NL80211_CMD_LEAVE_OCB
NL80211_CMD_CH_SWITCH_STARTED_NOTIFY
NL80211_CMD_TDLS_CHANNEL_SWITCH
NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH
NL80211_CMD_WIPHY_REG_CHANGE
NL80211_CMD_ABORT_SCAN
NL80211_CMD_START_NAN
NL80211_CMD_STOP_NAN
NL80211_CMD_ADD_NAN_FUNCTION
NL80211_CMD_DEL_NAN_FUNCTION
NL80211_CMD_CHANGE_NAN_CONFIG
NL80211_CMD_NAN_MATCH
__NL80211_CMD_AFTER_LAST
NL80211_CMD_MAX

Definition at line 893 of file nl80211-new.h.

◆ nl80211_connect_failed_reason

enum nl80211_connect_failed_reason

enum nl80211_connect_failed_reason - connection request failed reasons : Maximum number of clients that can be handled by the AP is reached. : Connection request is rejected due to ACL.

Enumerator
NL80211_CONN_FAIL_MAX_CLIENTS
NL80211_CONN_FAIL_BLOCKED_CLIENT

Definition at line 4697 of file nl80211-new.h.

◆ nl80211_cqm_rssi_threshold_event

enum nl80211_cqm_rssi_threshold_event

enum nl80211_cqm_rssi_threshold_event - RSSI threshold event : The RSSI level is lower than the configured threshold : The RSSI is higher than the configured threshold : (reserved, never sent)

Enumerator
NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW
NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH
NL80211_CQM_RSSI_BEACON_LOSS_EVENT

Definition at line 3902 of file nl80211-new.h.

◆ nl80211_crit_proto_id

enum nl80211_crit_proto_id

enum nl80211_crit_proto_id - nl80211 critical protocol identifiers

: protocol unspecified. : BOOTP or DHCPv6 protocol. : EAPOL protocol. : APIPA protocol. : must be kept last.

Enumerator
NL80211_CRIT_PROTO_UNSPEC
NL80211_CRIT_PROTO_DHCP
NL80211_CRIT_PROTO_EAPOL
NL80211_CRIT_PROTO_APIPA
NUM_NL80211_CRIT_PROTO

Definition at line 4830 of file nl80211-new.h.

◆ nl80211_dfs_regions

enum nl80211_dfs_regions

enum nl80211_dfs_regions - regulatory DFS regions

: Country has no DFS master region specified : Country follows DFS master rules from FCC : Country follows DFS master rules from ETSI : Country follows DFS master rules from JP/MKK/Telec

Enumerator
NL80211_DFS_UNSET
NL80211_DFS_FCC
NL80211_DFS_ETSI
NL80211_DFS_JP

Definition at line 3120 of file nl80211-new.h.

◆ nl80211_dfs_state

enum nl80211_dfs_state

enum nl80211_dfs_state - DFS states for channels

Channel states used by the DFS code.

: The channel can be used, but channel availability check (CAC) must be performed before using it for AP or IBSS. : A radar has been detected on this channel, it is therefore marked as not available. : The channel has been CAC checked and is available.

Enumerator
NL80211_DFS_USABLE
NL80211_DFS_UNAVAILABLE
NL80211_DFS_AVAILABLE

Definition at line 4803 of file nl80211-new.h.

◆ nl80211_ext_feature_index

enum nl80211_ext_feature_index

enum nl80211_ext_feature_index - bit index of extended features. : This driver supports IBSS with VHT datarates. : This driver supports RRM. When featured, user can can request to use RRM (see NL80211_ATTR_USE_RRM) with NL80211_CMD_ASSOCIATE and NL80211_CMD_CONNECT requests, which will set the ASSOC_REQ_USE_RRM flag in the association request even if NL80211_FEATURE_QUIET is not advertized. : This device supports MU-MIMO air sniffer which means that it can be configured to hear packets from certain groups which can be configured by the NL80211_ATTR_MU_MIMO_GROUP_DATA attribute, or can be configured to follow a station by configuring the NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR attribute. : This driver includes the actual time the scan started in scan results event. The time is the TSF of the BSS that the interface that requested the scan is connected to (if available). : Per BSS, this driver reports the time the last beacon/probe was received. The time is the TSF of the BSS that the interface that requested the scan is connected to (if available). : This driver supports configuration of channel dwell time. : Driver supports beacon rate configuration (AP/mesh), supporting a legacy (non HT/VHT) rate. : Driver supports beacon rate configuration (AP/mesh) with HT rates. : Driver supports beacon rate configuration (AP/mesh) with VHT rates.

: number of extended features. : highest extended feature index.

Enumerator
NL80211_EXT_FEATURE_VHT_IBSS
NL80211_EXT_FEATURE_RRM
NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER
NL80211_EXT_FEATURE_SCAN_START_TIME
NL80211_EXT_FEATURE_BSS_PARENT_TSF
NL80211_EXT_FEATURE_SET_SCAN_DWELL
NL80211_EXT_FEATURE_BEACON_RATE_LEGACY
NL80211_EXT_FEATURE_BEACON_RATE_HT
NL80211_EXT_FEATURE_BEACON_RATE_VHT
NUM_NL80211_EXT_FEATURES
MAX_NL80211_EXT_FEATURES

Definition at line 4654 of file nl80211-new.h.

◆ nl80211_feature_flags

enum nl80211_feature_flags

enum nl80211_feature_flags - device/driver features : This driver supports reflecting back TX status to the socket error queue when requested with the socket option. : This driver supports IBSS with HT datarates. : This driver takes care of freeing up the connected inactive stations in AP mode. : This driver has been tested to work properly to suppport receiving regulatory hints from cellular base stations. : (no longer available, only here to reserve the value for API/ABI compatibility) : This driver supports simultaneous authentication of equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station mode : This driver supports low priority scan : Scan flush is supported : Support scanning using an AP vif : The driver supports per-vif TX power setting : The driver expects userspace to perform OBSS scans and generate 20/40 BSS coex reports. This flag is used only for drivers implementing the CONNECT API, for AUTH/ASSOC it is implied. : P2P GO implementation supports CT Window setting : P2P GO implementation supports opportunistic powersave : The driver supports full state transitions for AP clients. Without this flag (and if the driver doesn't have the AP SME in the device) the driver supports adding stations only when they're associated and adds them in associated state (to later be transitioned into authorized), with this flag they should be added before even sending the authentication reply and then transitioned into authenticated, associated and authorized states using station flags. Note that even for drivers that support this, the default is to add stations in authenticated/associated state, so to add unauthenticated stations the authenticated/associated bits have to be set in the mask. : cfg80211 advertises channel limits (HT40, VHT 80/160 MHz) if this flag is set : This driver supports a userspace Mesh Peering Management entity which may be implemented by registering for beacons or NL80211_CMD_NEW_PEER_CANDIDATE events. The mesh beacon is still generated by the driver. : This driver supports an active monitor interface. An active monitor interface behaves like a normal monitor interface, but gets added to the driver. It ensures that incoming unicast packets directed at the configured interface address get ACKed. : This driver supports dynamic channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the lifetime of a BSS. : This device adds a DS Parameter Set IE to probe requests. : This device adds a WFA TPC Report IE to probe requests. : This device, in client mode, supports Quiet Period requests sent to it by an AP. : This device is capable of inserting the current tx power value into the TPC Report IE in the spectrum management TPC Report action frame, and in the Radio Measurement Link Measurement Report action frame. : This driver supports dynamic ACK timeout estimation (dynack). NL80211_ATTR_WIPHY_DYN_ACK flag attribute is used to enable dynack. : Device supports static spatial multiplexing powersave, ie. can turn off all but one chain even on HT connections that should be using more chains. : Device supports dynamic spatial multiplexing powersave, ie. can turn off all but one chain and then wake the rest up as required after, for example, rts/cts handshake. : the device supports setting up WMM TSPEC sessions (TID aka TSID 0-7) with the NL80211_CMD_ADD_TX_TS command. Standard IEEE 802.11 TSPEC setup is not yet supported, it needs to be able to handle Block-Ack agreements and other things. : Device supports configuring the vif's MAC address upon creation. See 'macaddr' field in the vif_params (cfg80211.h). : Driver supports channel switching when operating as a TDLS peer. : This device/driver supports using a random MAC address during scan (if the device is unassociated); the NL80211_SCAN_FLAG_RANDOM_ADDR flag may be set for scans and the MAC address mask/value will be used. : This device/driver supports using a random MAC address for every scan iteration during scheduled scan (while not associated), the NL80211_SCAN_FLAG_RANDOM_ADDR may be set for scheduled scan and the MAC address mask/value will be used. : This device/driver supports using a random MAC address for every scan iteration during "net detect", i.e. scan in unassociated WoWLAN, the NL80211_SCAN_FLAG_RANDOM_ADDR may be set for scheduled scan and the MAC address mask/value will be used.

Enumerator
NL80211_FEATURE_SK_TX_STATUS
NL80211_FEATURE_HT_IBSS
NL80211_FEATURE_INACTIVITY_TIMER
NL80211_FEATURE_CELL_BASE_REG_HINTS
NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL
NL80211_FEATURE_SAE
NL80211_FEATURE_LOW_PRIORITY_SCAN
NL80211_FEATURE_SCAN_FLUSH
NL80211_FEATURE_AP_SCAN
NL80211_FEATURE_VIF_TXPOWER
NL80211_FEATURE_NEED_OBSS_SCAN
NL80211_FEATURE_P2P_GO_CTWIN
NL80211_FEATURE_P2P_GO_OPPPS
NL80211_FEATURE_ADVERTISE_CHAN_LIMITS
NL80211_FEATURE_FULL_AP_CLIENT_STATE
NL80211_FEATURE_USERSPACE_MPM
NL80211_FEATURE_ACTIVE_MONITOR
NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE
NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES
NL80211_FEATURE_WFA_TPC_IE_IN_PROBES
NL80211_FEATURE_QUIET
NL80211_FEATURE_TX_POWER_INSERTION
NL80211_FEATURE_ACKTO_ESTIMATION
NL80211_FEATURE_STATIC_SMPS
NL80211_FEATURE_DYNAMIC_SMPS
NL80211_FEATURE_SUPPORTS_WMM_ADMISSION
NL80211_FEATURE_MAC_ON_CREATE
NL80211_FEATURE_TDLS_CHANNEL_SWITCH
NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR
NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR
NL80211_FEATURE_ND_RANDOM_MAC_ADDR

Definition at line 4585 of file nl80211-new.h.

◆ nl80211_frequency_attr

enum nl80211_frequency_attr

enum nl80211_frequency_attr - frequency attributes : attribute number 0 is reserved : Frequency in MHz : Channel is disabled in current regulatory domain. : no mechanisms that initiate radiation are permitted on this channel, this includes sending probe requests, or modes of operation that require beaconing. : Radar detection is mandatory on this channel in current regulatory domain. : Maximum transmission power in mBm (100 * dBm). : current state for DFS (enum nl80211_dfs_state) : time in miliseconds for how long this channel is in this DFS state. : HT40- isn't possible with this channel as the control channel : HT40+ isn't possible with this channel as the control channel : any 80 MHz channel using this channel as the primary or any of the secondary channels isn't possible, this includes 80+80 channels : any 160 MHz (but not 80+80) channel using this channel as the primary or any of the secondary channels isn't possible : DFS CAC time in milliseconds. : Only indoor use is permitted on this channel. A channel that has the INDOOR_ONLY attribute can only be used when there is a clear assessment that the device is operating in an indoor surroundings, i.e., it is connected to AC power (and not through portable DC inverters) or is under the control of a master that is acting as an AP and is connected to AC power. : IR operation is allowed on this channel if it's connected concurrently to a BSS on the same channel on the 2 GHz band or to a channel in the same UNII band (on the 5 GHz band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO or TDLS off-channel on a channel that has the IR_CONCURRENT attribute set can be done when there is a clear assessment that the device is operating under the guidance of an authorized master, i.e., setting up a GO or TDLS off-channel while the device is also connected to an AP with DFS and radar detection on the UNII band (it is up to user-space, i.e., wpa_supplicant to perform the required verifications). Using this attribute for IR is disallowed for master interfaces (IBSS, AP). : 20 MHz operation is not allowed on this channel in current regulatory domain. : 10 MHz operation is not allowed on this channel in current regulatory domain. : highest frequency attribute number currently defined : internal use

See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122 for more information on the FCC description of the relaxations allowed by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and NL80211_FREQUENCY_ATTR_IR_CONCURRENT.

Enumerator
__NL80211_FREQUENCY_ATTR_INVALID
NL80211_FREQUENCY_ATTR_FREQ
NL80211_FREQUENCY_ATTR_DISABLED
NL80211_FREQUENCY_ATTR_NO_IR
__NL80211_FREQUENCY_ATTR_NO_IBSS
NL80211_FREQUENCY_ATTR_RADAR
NL80211_FREQUENCY_ATTR_MAX_TX_POWER
NL80211_FREQUENCY_ATTR_DFS_STATE
NL80211_FREQUENCY_ATTR_DFS_TIME
NL80211_FREQUENCY_ATTR_NO_HT40_MINUS
NL80211_FREQUENCY_ATTR_NO_HT40_PLUS
NL80211_FREQUENCY_ATTR_NO_80MHZ
NL80211_FREQUENCY_ATTR_NO_160MHZ
NL80211_FREQUENCY_ATTR_DFS_CAC_TIME
NL80211_FREQUENCY_ATTR_INDOOR_ONLY
NL80211_FREQUENCY_ATTR_IR_CONCURRENT
NL80211_FREQUENCY_ATTR_NO_20MHZ
NL80211_FREQUENCY_ATTR_NO_10MHZ
__NL80211_FREQUENCY_ATTR_AFTER_LAST
NL80211_FREQUENCY_ATTR_MAX

Definition at line 2889 of file nl80211-new.h.

◆ nl80211_hidden_ssid

enum nl80211_hidden_ssid

enum nl80211_hidden_ssid - values for NL80211_ATTR_HIDDEN_SSID : do not hide SSID (i.e., broadcast it in Beacon frames) : hide SSID by using zero-length SSID element in Beacon frames : hide SSID by using correct length of SSID element in Beacon frames but zero out each byte in the SSID

Enumerator
NL80211_HIDDEN_SSID_NOT_IN_USE
NL80211_HIDDEN_SSID_ZERO_LEN
NL80211_HIDDEN_SSID_ZERO_CONTENTS

Definition at line 4419 of file nl80211-new.h.

◆ nl80211_if_combination_attrs

enum nl80211_if_combination_attrs

enum nl80211_if_combination_attrs – interface combination attributes

: (reserved) : Nested attributes containing the limits for given interface types, see &enum nl80211_iface_limit_attrs. : u32 attribute giving the total number of interfaces that can be created in this group. This number doesn't apply to interfaces purely managed in software, which are listed in a separate attribute NL80211_ATTR_INTERFACES_SOFTWARE. : flag attribute specifying that beacon intervals within this group must be all the same even for infrastructure and AP/GO combinations, i.e. the GO(s) must adopt the infrastructure network's beacon interval. : u32 attribute specifying how many different channels may be used within this group. : u32 attribute containing the bitmap of supported channel widths for radar detection. : u32 attribute containing the bitmap of supported regulatory regions for radar detection. : number of attributes : highest attribute number

Examples: limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2 => allows an AP and a STA that must match BIs

numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8 => allows 8 of AP/GO

numbers = [ #{STA} <= 2 ], channels = 2, max = 2 => allows two STAs on different channels

numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4 => allows a STA plus three P2P interfaces

The list of these four possiblities could completely be contained within the NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate that any of these groups must match.

"Combinations" of just a single interface will not be listed here, a single interface of any valid interface type is assumed to always be possible by itself. This means that implicitly, for each valid interface type, the following group always exists: numbers = [ #{<type>} <= 1 ], channels = 1, max = 1

Enumerator
NL80211_IFACE_COMB_UNSPEC
NL80211_IFACE_COMB_LIMITS
NL80211_IFACE_COMB_MAXNUM
NL80211_IFACE_COMB_STA_AP_BI_MATCH
NL80211_IFACE_COMB_NUM_CHANNELS
NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS
NL80211_IFACE_COMB_RADAR_DETECT_REGIONS
NUM_NL80211_IFACE_COMB
MAX_NL80211_IFACE_COMB

Definition at line 4322 of file nl80211-new.h.

◆ nl80211_iface_limit_attrs

enum nl80211_iface_limit_attrs

enum nl80211_iface_limit_attrs - limit attributes : (reserved) : maximum number of interfaces that can be chosen from this set of interface types (u32) : nested attribute containing a flag attribute for each interface type in this set : number of attributes : highest attribute number

Enumerator
NL80211_IFACE_LIMIT_UNSPEC
NL80211_IFACE_LIMIT_MAX
NL80211_IFACE_LIMIT_TYPES
NUM_NL80211_IFACE_LIMIT
MAX_NL80211_IFACE_LIMIT

Definition at line 4266 of file nl80211-new.h.

◆ nl80211_iftype

enum nl80211_iftype

enum nl80211_iftype - (virtual) interface types

: unspecified type, driver decides : independent BSS member : managed BSS member : access point : VLAN interface for access points; VLAN interfaces are a bit special in that they must always be tied to a pre-existing AP type interface. : wireless distribution interface : monitor interface receiving all frames : mesh point : P2P client : P2P group owner : P2P device interface type, this is not a netdev and therefore can't be created in the normal ways, use the NL80211_CMD_START_P2P_DEVICE and NL80211_CMD_STOP_P2P_DEVICE commands to create and destroy one : Outside Context of a BSS This mode corresponds to the MIB variable dot11OCBActivated=true : NAN device interface type (not a netdev) : highest interface type number currently defined : number of defined interface types

These values are used with the NL80211_ATTR_IFTYPE to set the type of an interface.

Enumerator
NL80211_IFTYPE_UNSPECIFIED
NL80211_IFTYPE_ADHOC
NL80211_IFTYPE_STATION
NL80211_IFTYPE_AP
NL80211_IFTYPE_AP_VLAN
NL80211_IFTYPE_WDS
NL80211_IFTYPE_MONITOR
NL80211_IFTYPE_MESH_POINT
NL80211_IFTYPE_P2P_CLIENT
NL80211_IFTYPE_P2P_GO
NL80211_IFTYPE_P2P_DEVICE
NL80211_IFTYPE_OCB
NL80211_IFTYPE_NAN
NUM_NL80211_IFTYPES
NL80211_IFTYPE_MAX

Definition at line 2438 of file nl80211-new.h.

◆ nl80211_key_attributes

enum nl80211_key_attributes

enum nl80211_key_attributes - key attributes : invalid : (temporal) key data; for TKIP this consists of 16 bytes encryption key followed by 8 bytes each for TX and RX MIC keys : key ID (u8, 0-3) : key cipher suite (u32, as defined by IEEE 802.11 section 7.3.2.25.1, e.g. 0x000FAC04) : transmit key sequence number (IV/PN) for TKIP and CCMP keys, each six bytes in little endian : flag indicating default key : flag indicating default management key : the key type from enum nl80211_key_type, if not specified the default depends on whether a MAC address was given with the command using the key or not (u32) : A nested attribute containing flags attributes, specifying what a key should be set as default as. See &enum nl80211_key_default_types. : internal : highest key attribute

Enumerator
__NL80211_KEY_INVALID
NL80211_KEY_DATA
NL80211_KEY_IDX
NL80211_KEY_CIPHER
NL80211_KEY_SEQ
NL80211_KEY_DEFAULT
NL80211_KEY_DEFAULT_MGMT
NL80211_KEY_TYPE
NL80211_KEY_DEFAULT_TYPES
__NL80211_KEY_AFTER_LAST
NL80211_KEY_MAX

Definition at line 3764 of file nl80211-new.h.

◆ nl80211_key_default_types

enum nl80211_key_default_types

enum nl80211_key_default_types - key default types : invalid : key should be used as default unicast key : key should be used as default multicast key : number of default types

Enumerator
__NL80211_KEY_DEFAULT_TYPE_INVALID
NL80211_KEY_DEFAULT_TYPE_UNICAST
NL80211_KEY_DEFAULT_TYPE_MULTICAST
NUM_NL80211_KEY_DEFAULT_TYPES

Definition at line 3734 of file nl80211-new.h.

◆ nl80211_key_type

enum nl80211_key_type

enum nl80211_key_type - Key Type : Group (broadcast/multicast) key : Pairwise (unicast/individual) key : PeerKey (DLS) : number of defined key types

Enumerator
NL80211_KEYTYPE_GROUP
NL80211_KEYTYPE_PAIRWISE
NL80211_KEYTYPE_PEERKEY
NUM_NL80211_KEYTYPES

Definition at line 3702 of file nl80211-new.h.

◆ nl80211_mesh_power_mode

enum nl80211_mesh_power_mode

enum nl80211_mesh_power_mode - mesh power save modes

: The mesh power mode of the mesh STA is not known or has not been set yet. : Active mesh power mode. The mesh STA is in Awake state all the time. : Light sleep mode. The mesh STA will alternate between Active and Doze states, but will wake up for neighbor's beacons. : Deep sleep mode. The mesh STA will alternate between Active and Doze states, but may not wake up for neighbor's beacons.

- internal use - highest possible power save level

Enumerator
NL80211_MESH_POWER_UNKNOWN
NL80211_MESH_POWER_ACTIVE
NL80211_MESH_POWER_LIGHT_SLEEP
NL80211_MESH_POWER_DEEP_SLEEP
__NL80211_MESH_POWER_AFTER_LAST
NL80211_MESH_POWER_MAX

Definition at line 3253 of file nl80211-new.h.

◆ nl80211_mesh_setup_params

enum nl80211_mesh_setup_params

enum nl80211_mesh_setup_params - mesh setup parameters

Mesh setup parameters. These are used to start/join a mesh and cannot be changed while the mesh is active.

: Internal use

: Enable this option to use a vendor specific path selection algorithm or disable it to use the default HWMP.

: Enable this option to use a vendor specific path metric or disable it to use the default Airtime metric.

: Information elements for this mesh, for instance, a robust security network ie, or a vendor specific information element that vendors will use to identify the path selection methods and metrics in use.

: Enable this option if an authentication daemon will be authenticating mesh candidates.

: Enable this option if an authentication daemon will be securing peer link frames. AMPE is a secured version of Mesh Peering Management (MPM) and is implemented with the assistance of a userspace daemon. When this flag is set, the kernel will send peer management frames to a userspace daemon that will implement AMPE functionality (security capabilities selection, key confirmation, and key management). When the flag is unset (default), the kernel can autonomously complete (unsecured) mesh peering without the need of a userspace daemon.

: Enable this option to use a vendor specific synchronization method or disable it to use the default neighbor offset synchronization

: Enable this option if userspace will implement an MPM which handles peer allocation and state.

: Inform the kernel of the authentication method (u8, as defined in IEEE 8.4.2.100.6, e.g. 0x1 for SAE). Default is no authentication method required.

: highest possible mesh setup attribute number

: Internal use

Enumerator
__NL80211_MESH_SETUP_INVALID
NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL
NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC
NL80211_MESH_SETUP_IE
NL80211_MESH_SETUP_USERSPACE_AUTH
NL80211_MESH_SETUP_USERSPACE_AMPE
NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC
NL80211_MESH_SETUP_USERSPACE_MPM
NL80211_MESH_SETUP_AUTH_PROTOCOL
__NL80211_MESH_SETUP_ATTR_AFTER_LAST
NL80211_MESH_SETUP_ATTR_MAX

Definition at line 3456 of file nl80211-new.h.

◆ nl80211_meshconf_params

enum nl80211_meshconf_params

enum nl80211_meshconf_params - mesh configuration parameters

Mesh configuration parameters. These can be changed while the mesh is active.

: internal use

: specifies the initial retry timeout in millisecond units, used by the Peer Link Open message

: specifies the initial confirm timeout, in millisecond units, used by the peer link management to close a peer link

: specifies the holding timeout, in millisecond units

: maximum number of peer links allowed on this mesh interface

: specifies the maximum number of peer link open retries that can be sent to establish a new peer link instance in a mesh

: specifies the value of TTL field set at a source mesh point.

: whether we should automatically open peer links when we detect compatible mesh peers. Disabled if or are set.

: the number of action frames containing a PREQ that an MP can send to a particular destination (path target)

: how frequently to refresh mesh paths (in milliseconds)

: minimum length of time to wait until giving up on a path discovery (in milliseconds)

: The time (in TUs) for which mesh points receiving a PREQ shall consider the forwarding information from the root to be valid. (TU = time unit)

: The minimum interval of time (in TUs) during which an MP can send only one action frame containing a PREQ reference element

: The interval of time (in TUs) that it takes for an HWMP information element to propagate across the mesh

: whether root mode is enabled or not

: specifies the value of TTL field set at a source mesh point for path selection elements.

: The interval of time (in TUs) between root announcements are transmitted.

: Advertise that this mesh station has access to a broader network beyond the MBSS. This is done via Root Announcement frames.

: The minimum interval of time (in TUs) during which a mesh STA can send only one Action frame containing a PERR element.

: set Mesh STA as forwarding or non-forwarding or forwarding entity (default is TRUE - forwarding entity)

: RSSI threshold in dBm. This specifies the threshold for average signal strength of candidate station to establish a peer link.

: maximum number of neighbors to synchronize to for 11s default synchronization method (see 11C.12.2.2)

: set mesh HT protection mode.

: highest possible mesh configuration attribute

: The time (in TUs) for which mesh STAs receiving a proactive PREQ shall consider the forwarding information to the root mesh STA to be valid.

: The interval of time (in TUs) between proactive PREQs are transmitted.

: The minimum interval of time (in TUs) during which a mesh STA can send only one Action frame containing a PREQ element for root path confirmation.

: Default mesh power mode for new peer links. type &enum nl80211_mesh_power_mode (u32)

: awake window duration (in TUs)

: If no tx activity is seen from a STA we've established peering with for longer than this time (in seconds), then remove it from the STA's list of peers. You may set this to 0 to disable the removal of the STA. Default is 30 minutes.

: internal use

Enumerator
__NL80211_MESHCONF_INVALID
NL80211_MESHCONF_RETRY_TIMEOUT
NL80211_MESHCONF_CONFIRM_TIMEOUT
NL80211_MESHCONF_HOLDING_TIMEOUT
NL80211_MESHCONF_MAX_PEER_LINKS
NL80211_MESHCONF_MAX_RETRIES
NL80211_MESHCONF_TTL
NL80211_MESHCONF_AUTO_OPEN_PLINKS
NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES
NL80211_MESHCONF_PATH_REFRESH_TIME
NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT
NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT
NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL
NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME
NL80211_MESHCONF_HWMP_ROOTMODE
NL80211_MESHCONF_ELEMENT_TTL
NL80211_MESHCONF_HWMP_RANN_INTERVAL
NL80211_MESHCONF_GATE_ANNOUNCEMENTS
NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL
NL80211_MESHCONF_FORWARDING
NL80211_MESHCONF_RSSI_THRESHOLD
NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR
NL80211_MESHCONF_HT_OPMODE
NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT
NL80211_MESHCONF_HWMP_ROOT_INTERVAL
NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL
NL80211_MESHCONF_POWER_MODE
NL80211_MESHCONF_AWAKE_WINDOW
NL80211_MESHCONF_PLINK_TIMEOUT
__NL80211_MESHCONF_ATTR_AFTER_LAST
NL80211_MESHCONF_ATTR_MAX

Definition at line 3371 of file nl80211-new.h.

◆ nl80211_mfp

enum nl80211_mfp

enum nl80211_mfp - Management frame protection state : Management frame protection not used : Management frame protection required

Enumerator
NL80211_MFP_NO
NL80211_MFP_REQUIRED

Definition at line 3715 of file nl80211-new.h.

◆ nl80211_mntr_flags

enum nl80211_mntr_flags

enum nl80211_mntr_flags - monitor configuration flags

Monitor configuration flags.

: reserved

: pass frames with bad FCS : pass frames with bad PLCP : pass control frames : disable BSSID filtering : report frames after processing. overrides all other flags. : use the configured MAC address and ACK incoming unicast packets.

: internal use : highest possible monitor flag

Enumerator
__NL80211_MNTR_FLAG_INVALID
NL80211_MNTR_FLAG_FCSFAIL
NL80211_MNTR_FLAG_PLCPFAIL
NL80211_MNTR_FLAG_CONTROL
NL80211_MNTR_FLAG_OTHER_BSS
NL80211_MNTR_FLAG_COOK_FRAMES
NL80211_MNTR_FLAG_ACTIVE
__NL80211_MNTR_FLAG_AFTER_LAST
NL80211_MNTR_FLAG_MAX

Definition at line 3221 of file nl80211-new.h.

◆ nl80211_mpath_flags

enum nl80211_mpath_flags

enum nl80211_mpath_flags - nl80211 mesh path flags

: the mesh path is active : the mesh path discovery process is running : the mesh path contains a valid SN : the mesh path has been manually set : the mesh path discovery process succeeded

Enumerator
NL80211_MPATH_FLAG_ACTIVE
NL80211_MPATH_FLAG_RESOLVING
NL80211_MPATH_FLAG_SN_VALID
NL80211_MPATH_FLAG_FIXED
NL80211_MPATH_FLAG_RESOLVED

Definition at line 2751 of file nl80211-new.h.

◆ nl80211_mpath_info

enum nl80211_mpath_info

enum nl80211_mpath_info - mesh path information

These attribute types are used with NL80211_ATTR_MPATH_INFO when getting information about a mesh path.

: attribute number 0 is reserved : number of queued frames for this destination : destination sequence number : metric (cost) of this mesh path : expiration time for the path, in msec from now : mesh path flags, enumerated in &enum nl80211_mpath_flags; : total path discovery timeout, in msec : mesh path discovery retries : highest mesh path information attribute number currently defind : internal use

Enumerator
__NL80211_MPATH_INFO_INVALID
NL80211_MPATH_INFO_FRAME_QLEN
NL80211_MPATH_INFO_SN
NL80211_MPATH_INFO_METRIC
NL80211_MPATH_INFO_EXPTIME
NL80211_MPATH_INFO_FLAGS
NL80211_MPATH_INFO_DISCOVERY_TIMEOUT
NL80211_MPATH_INFO_DISCOVERY_RETRIES
__NL80211_MPATH_INFO_AFTER_LAST
NL80211_MPATH_INFO_MAX

Definition at line 2778 of file nl80211-new.h.

◆ nl80211_nan_dual_band_conf

enum nl80211_nan_dual_band_conf

enum nl80211_nan_dual_band_conf - NAN dual band configuration

Defines the NAN dual band mode of operation

: device default mode : 2.4GHz mode : 5GHz mode

Enumerator
NL80211_NAN_BAND_DEFAULT
NL80211_NAN_BAND_2GHZ
NL80211_NAN_BAND_5GHZ

Definition at line 4966 of file nl80211-new.h.

◆ nl80211_nan_func_attributes

enum nl80211_nan_func_attributes

enum nl80211_nan_func_attributes - NAN function attributes : invalid : &enum nl80211_nan_function_type (u8). : 6 bytes of the service ID hash as specified in NAN spec. This is a binary attribute. : relevant if the function's type is publish. Defines the transmission type for the publish Service Discovery Frame, see &enum nl80211_nan_publish_type. Its type is u8. : relevant if the function is a solicited publish. Should the solicited publish Service Discovery Frame be sent to the NAN Broadcast address. This is a flag. : relevant if the function's type is subscribe. Is the subscribe active. This is a flag. : relevant if the function's type is follow up. The instance ID for the follow up Service Discovery Frame. This is u8. : relevant if the function's type is follow up. This is a u8. The requestor instance ID for the follow up Service Discovery Frame. : the MAC address of the recipient of the follow up Service Discovery Frame. This is a binary attribute. : is this function limited for devices in a close range. The range itself (RSSI) is defined by the device. This is a flag. : strictly positive number of DWs this function should stay active. If not present infinite TTL is assumed. This is a u32. : array of bytes describing the service specific info. This is a binary attribute. : Service Receive Filter. This is a nested attribute. See &enum nl80211_nan_srf_attributes. : Receive Matching filter. This is a nested attribute. It is a list of binary values. : Transmit Matching filter. This is a nested attribute. It is a list of binary values. : The instance ID of the function. Its type is u8 and it cannot be 0. : NAN function termination reason. See &enum nl80211_nan_func_term_reason.

: internal : highest NAN function attribute

Enumerator
__NL80211_NAN_FUNC_INVALID
NL80211_NAN_FUNC_TYPE
NL80211_NAN_FUNC_SERVICE_ID
NL80211_NAN_FUNC_PUBLISH_TYPE
NL80211_NAN_FUNC_PUBLISH_BCAST
NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE
NL80211_NAN_FUNC_FOLLOW_UP_ID
NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID
NL80211_NAN_FUNC_FOLLOW_UP_DEST
NL80211_NAN_FUNC_CLOSE_RANGE
NL80211_NAN_FUNC_TTL
NL80211_NAN_FUNC_SERVICE_INFO
NL80211_NAN_FUNC_SRF
NL80211_NAN_FUNC_RX_MATCH_FILTER
NL80211_NAN_FUNC_TX_MATCH_FILTER
NL80211_NAN_FUNC_INSTANCE_ID
NL80211_NAN_FUNC_TERM_REASON
NUM_NL80211_NAN_FUNC_ATTR
NL80211_NAN_FUNC_ATTR_MAX

Definition at line 5065 of file nl80211-new.h.

◆ nl80211_nan_func_term_reason

enum nl80211_nan_func_term_reason

enum nl80211_nan_func_term_reason - NAN functions termination reason

Defines termination reasons of a NAN function

: requested by user : timeout : errored

Enumerator
NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST
NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED
NL80211_NAN_FUNC_TERM_REASON_ERROR

Definition at line 5013 of file nl80211-new.h.

◆ nl80211_nan_function_type

enum nl80211_nan_function_type

enum nl80211_nan_function_type - NAN function type

Defines the function type of a NAN function

: function is publish : function is subscribe : function is follow-up

Enumerator
NL80211_NAN_FUNC_PUBLISH
NL80211_NAN_FUNC_SUBSCRIBE
NL80211_NAN_FUNC_FOLLOW_UP
__NL80211_NAN_FUNC_TYPE_AFTER_LAST
NL80211_NAN_FUNC_MAX_TYPE

Definition at line 4981 of file nl80211-new.h.

◆ nl80211_nan_match_attributes

enum nl80211_nan_match_attributes

enum nl80211_nan_match_attributes - NAN match attributes : invalid : the local function that had the match. This is a nested attribute. See &enum nl80211_nan_func_attributes. : the peer function that caused the match. This is a nested attribute. See &enum nl80211_nan_func_attributes.

: internal : highest NAN match attribute

Enumerator
__NL80211_NAN_MATCH_INVALID
NL80211_NAN_MATCH_FUNC_LOCAL
NL80211_NAN_MATCH_FUNC_PEER
NUM_NL80211_NAN_MATCH_ATTR
NL80211_NAN_MATCH_ATTR_MAX

Definition at line 5129 of file nl80211-new.h.

◆ nl80211_nan_publish_type

enum nl80211_nan_publish_type

enum nl80211_nan_publish_type - NAN publish tx type

Defines how to send publish Service Discovery Frames

: publish function is solicited : publish function is unsolicited

Enumerator
NL80211_NAN_SOLICITED_PUBLISH
NL80211_NAN_UNSOLICITED_PUBLISH

Definition at line 4999 of file nl80211-new.h.

◆ nl80211_nan_srf_attributes

enum nl80211_nan_srf_attributes

enum nl80211_nan_srf_attributes - NAN Service Response filter attributes : invalid : present if the include bit of the SRF set. This is a flag. : Bloom Filter. Present if and only if &NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary. : index of the Bloom Filter. Mandatory if &NL80211_NAN_SRF_BF is present. This is a u8. : list of MAC addresses for the SRF. Present if and only if &NL80211_NAN_SRF_BF isn't present. This is a nested attribute. Each nested attribute is a MAC address. : internal : highest NAN SRF attribute

Enumerator
__NL80211_NAN_SRF_INVALID
NL80211_NAN_SRF_INCLUDE
NL80211_NAN_SRF_BF
NL80211_NAN_SRF_BF_IDX
NL80211_NAN_SRF_MAC_ADDRS
NUM_NL80211_NAN_SRF_ATTR
NL80211_NAN_SRF_ATTR_MAX

Definition at line 5104 of file nl80211-new.h.

◆ nl80211_packet_pattern_attr

enum nl80211_packet_pattern_attr

enum nl80211_packet_pattern_attr - packet pattern attribute : invalid number for nested attribute : the pattern, values where the mask has a zero bit are ignored : pattern mask, must be long enough to have a bit for each byte in the pattern. The lowest-order bit corresponds to the first byte of the pattern, but the bytes of the pattern are in a little-endian-like format, i.e. the 9th byte of the pattern corresponds to the lowest-order bit in the second byte of the mask. For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where xx indicates "don't care") would be represented by a pattern of twelve zero bytes, and a mask of "0xed,0x01". Note that the pattern matching is done as though frames were not 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked first (including SNAP header unpacking) and then matched. : packet offset, pattern is matched after these fixed number of bytes of received packet : number of attributes : max attribute number

Enumerator
__NL80211_PKTPAT_INVALID
NL80211_PKTPAT_MASK
NL80211_PKTPAT_PATTERN
NL80211_PKTPAT_OFFSET
NUM_NL80211_PKTPAT
MAX_NL80211_PKTPAT

Definition at line 3942 of file nl80211-new.h.

◆ nl80211_plink_state

enum nl80211_plink_state

enum nl80211_plink_state - state of a mesh peer link finite state machine

: initial state, considered the implicit state of non existant mesh peer links : mesh plink open frame has been sent to this mesh peer : mesh plink open frame has been received from this mesh peer : mesh plink confirm frame has been received from this mesh peer : mesh peer link is established : mesh peer link is being closed or cancelled : all frames transmitted from this mesh plink are discarded : number of peer link states : highest numerical value of plink states

Enumerator
NL80211_PLINK_LISTEN
NL80211_PLINK_OPN_SNT
NL80211_PLINK_OPN_RCVD
NL80211_PLINK_CNF_RCVD
NL80211_PLINK_ESTAB
NL80211_PLINK_HOLDING
NL80211_PLINK_BLOCKED
NUM_NL80211_PLINK_STATES
MAX_NL80211_PLINK_STATES

Definition at line 4355 of file nl80211-new.h.

◆ nl80211_pmksa_candidate_attr

enum nl80211_pmksa_candidate_attr

enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates : invalid number for nested attributes : candidate index (u32; the smaller, the higher priority) : candidate BSSID (6 octets) : RSN pre-authentication supported (flag) : number of PMKSA caching candidate attributes (internal) : highest PMKSA caching candidate attribute (internal)

Enumerator
__NL80211_PMKSA_CANDIDATE_INVALID
NL80211_PMKSA_CANDIDATE_INDEX
NL80211_PMKSA_CANDIDATE_BSSID
NL80211_PMKSA_CANDIDATE_PREAUTH
NUM_NL80211_PMKSA_CANDIDATE
MAX_NL80211_PMKSA_CANDIDATE

Definition at line 4457 of file nl80211-new.h.

◆ nl80211_probe_resp_offload_support_attr

enum nl80211_probe_resp_offload_support_attr

enum nl80211_probe_resp_offload_support_attr - optional supported protocols for probe-response offloading by the driver/FW. To be used with the NL80211_ATTR_PROBE_RESP_OFFLOAD attribute. Each enum value represents a bit in the bitmap of supported protocols. Typically a subset of probe-requests belonging to a supported protocol will be excluded from offload and uploaded to the host.

: Support for WPS ver. 1 : Support for WPS ver. 2 : Support for P2P : Support for 802.11u

Enumerator
NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS
NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2
NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P
NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U

Definition at line 4684 of file nl80211-new.h.

◆ nl80211_protocol_features

enum nl80211_protocol_features

enum enum nl80211_protocol_features - nl80211 protocol features : nl80211 supports splitting wiphy dumps (if requested by the application with the attribute NL80211_ATTR_SPLIT_WIPHY_DUMP. Also supported is filtering the wiphy dump by NL80211_ATTR_WIPHY, NL80211_ATTR_IFINDEX or NL80211_ATTR_WDEV.

Enumerator
NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP

Definition at line 4817 of file nl80211-new.h.

◆ nl80211_ps_state

enum nl80211_ps_state

enum nl80211_ps_state - powersave state : powersave is disabled : powersave is enabled

Enumerator
NL80211_PS_DISABLED
NL80211_PS_ENABLED

Definition at line 3845 of file nl80211-new.h.

◆ nl80211_radar_event

enum nl80211_radar_event

enum nl80211_radar_event - type of radar event for DFS operation

Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace about detected radars or success of the channel available check (CAC)

: A radar pattern has been detected. The channel is now unusable. : Channel Availability Check has been finished, the channel is now available. : Channel Availability Check has been aborted, no change to the channel status. : The Non-Occupancy Period for this channel is over, channel becomes usable.

Enumerator
NL80211_RADAR_DETECTED
NL80211_RADAR_CAC_FINISHED
NL80211_RADAR_CAC_ABORTED
NL80211_RADAR_NOP_FINISHED

Definition at line 4785 of file nl80211-new.h.

◆ nl80211_rate_info

enum nl80211_rate_info

enum nl80211_rate_info - bitrate information

These attribute types are used with NL80211_STA_INFO_TXRATE when getting information about the bitrate of a station. There are 2 attributes for bitrate, a legacy one that represents a 16-bit value, and new one that represents a 32-bit value. If the rate value fits into 16 bit, both attributes are reported with the same value. If the rate is too high to fit into 16 bits (>6.5535Gbps) only 32-bit attribute is included. User space tools encouraged to use the 32-bit attribute and fall back to the 16-bit one for compatibility with older kernels.

: attribute number 0 is reserved : total bitrate (u16, 100kbit/s) : mcs index for 802.11n (u8) : 40 MHz dualchannel bitrate : 400ns guard interval : total bitrate (u32, 100kbit/s) : highest rate_info number currently defined : MCS index for VHT (u8) : number of streams in VHT (u8) : 80 MHz VHT rate : unused - 80+80 is treated the same as 160 for purposes of the bitrates : 160 MHz VHT rate : 10 MHz width - note that this is a legacy rate and will be reported as the actual bitrate, i.e. half the base (20 MHz) rate : 5 MHz width - note that this is a legacy rate and will be reported as the actual bitrate, i.e. a quarter of the base (20 MHz) rate : internal use

Enumerator
__NL80211_RATE_INFO_INVALID
NL80211_RATE_INFO_BITRATE
NL80211_RATE_INFO_MCS
NL80211_RATE_INFO_40_MHZ_WIDTH
NL80211_RATE_INFO_SHORT_GI
NL80211_RATE_INFO_BITRATE32
NL80211_RATE_INFO_VHT_MCS
NL80211_RATE_INFO_VHT_NSS
NL80211_RATE_INFO_80_MHZ_WIDTH
NL80211_RATE_INFO_80P80_MHZ_WIDTH
NL80211_RATE_INFO_160_MHZ_WIDTH
NL80211_RATE_INFO_10_MHZ_WIDTH
NL80211_RATE_INFO_5_MHZ_WIDTH
__NL80211_RATE_INFO_AFTER_LAST
NL80211_RATE_INFO_MAX

Definition at line 2559 of file nl80211-new.h.

◆ nl80211_reg_initiator

enum nl80211_reg_initiator

enum nl80211_initiator - Indicates the initiator of a reg domain request : Core queried CRDA for a dynamic world regulatory domain. : User asked the wireless core to set the regulatory domain. : a wireless drivers has hinted to the wireless core it thinks its knows the regulatory domain we should be in. : the wireless core has received an 802.11 country information element with regulatory information it thinks we should consider. cfg80211 only processes the country code from the IE, and relies on the regulatory domain information structure passed by userspace (CRDA) from our wireless-regdb. If a channel is enabled but the country code indicates it should be disabled we disable the channel and re-enable it upon disassociation.

Enumerator
NL80211_REGDOM_SET_BY_CORE
NL80211_REGDOM_SET_BY_USER
NL80211_REGDOM_SET_BY_DRIVER
NL80211_REGDOM_SET_BY_COUNTRY_IE

Definition at line 2957 of file nl80211-new.h.

◆ nl80211_reg_rule_attr

enum nl80211_reg_rule_attr

enum nl80211_reg_rule_attr - regulatory rule attributes : attribute number 0 is reserved : a set of flags which specify additional considerations for a given frequency range. These are the &enum nl80211_reg_rule_flags. : starting frequencry for the regulatory rule in KHz. This is not a center of frequency but an actual regulatory band edge. : ending frequency for the regulatory rule in KHz. This is not a center a frequency but an actual regulatory band edge. : maximum allowed bandwidth for this frequency range, in KHz. : the maximum allowed antenna gain for a given frequency range. The value is in mBi (100 * dBi). If you don't have one then don't send this. : the maximum allowed EIRP for a given frequency range. The value is in mBm (100 * dBm). : DFS CAC time in milliseconds. If not present or 0 default CAC time will be used. : highest regulatory rule attribute number currently defined : internal use

Enumerator
__NL80211_REG_RULE_ATTR_INVALID
NL80211_ATTR_REG_RULE_FLAGS
NL80211_ATTR_FREQ_RANGE_START
NL80211_ATTR_FREQ_RANGE_END
NL80211_ATTR_FREQ_RANGE_MAX_BW
NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN
NL80211_ATTR_POWER_RULE_MAX_EIRP
NL80211_ATTR_DFS_CAC_TIME
__NL80211_REG_RULE_ATTR_AFTER_LAST
NL80211_REG_RULE_ATTR_MAX

Definition at line 3012 of file nl80211-new.h.

◆ nl80211_reg_rule_flags

enum nl80211_reg_rule_flags

enum nl80211_reg_rule_flags - regulatory rule flags

: OFDM modulation not allowed : CCK modulation not allowed : indoor operation not allowed : outdoor operation not allowed : DFS support is required to be used : this is only for Point To Point links : this is only for Point To Multi Point links : no mechanisms that initiate radiation are allowed, this includes probe requests or modes of operation that require beaconing. : maximum available bandwidth should be calculated base on contiguous rules and wider channels will be allowed to cross multiple contiguous/overlapping frequency ranges. : See &NL80211_FREQUENCY_ATTR_IR_CONCURRENT : channels can't be used in HT40- operation : channels can't be used in HT40+ operation : 80MHz operation not allowed : 160MHz operation not allowed

Enumerator
NL80211_RRF_NO_OFDM
NL80211_RRF_NO_CCK
NL80211_RRF_NO_INDOOR
NL80211_RRF_NO_OUTDOOR
NL80211_RRF_DFS
NL80211_RRF_PTP_ONLY
NL80211_RRF_PTMP_ONLY
NL80211_RRF_NO_IR
__NL80211_RRF_NO_IBSS
NL80211_RRF_AUTO_BW
NL80211_RRF_IR_CONCURRENT
NL80211_RRF_NO_HT40MINUS
NL80211_RRF_NO_HT40PLUS
NL80211_RRF_NO_80MHZ
NL80211_RRF_NO_160MHZ

Definition at line 3084 of file nl80211-new.h.

◆ nl80211_reg_type

enum nl80211_reg_type

enum nl80211_reg_type - specifies the type of regulatory domain : the regulatory domain set is one that pertains to a specific country. When this is set you can count on the ISO / IEC 3166 alpha2 country code being valid. : the regulatory set domain is the world regulatory domain. : the regulatory domain set is a custom driver specific world regulatory domain. These do not apply system-wide and are only applicable to the individual devices which have requested them to be applied. : the regulatory domain set is the product of an intersection between two regulatory domains – the previously set regulatory domain on the system and the last accepted regulatory domain request to be processed.

Enumerator
NL80211_REGDOM_TYPE_COUNTRY
NL80211_REGDOM_TYPE_WORLD
NL80211_REGDOM_TYPE_CUSTOM_WORLD
NL80211_REGDOM_TYPE_INTERSECTION

Definition at line 2980 of file nl80211-new.h.

◆ nl80211_rekey_data

enum nl80211_rekey_data

enum nl80211_rekey_data - attributes for GTK rekey offload : invalid number for nested attributes : key encryption key (binary) : key confirmation key (binary) : replay counter (binary) : number of rekey attributes (internal) : highest rekey attribute (internal)

Enumerator
__NL80211_REKEY_DATA_INVALID
NL80211_REKEY_DATA_KEK
NL80211_REKEY_DATA_KCK
NL80211_REKEY_DATA_REPLAY_CTR
NUM_NL80211_REKEY_DATA
MAX_NL80211_REKEY_DATA

Definition at line 4399 of file nl80211-new.h.

◆ nl80211_rxmgmt_flags

enum nl80211_rxmgmt_flags

enum nl80211_rxmgmt_flags - flags for received management frame.

Used by cfg80211_rx_mgmt()

: frame was answered by device/driver.

Enumerator
NL80211_RXMGMT_FLAG_ANSWERED

Definition at line 4849 of file nl80211-new.h.

◆ nl80211_scan_flags

enum nl80211_scan_flags

enum nl80211_scan_flags - scan request control flags

Scan request control flags are used to control the handling of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN requests.

: scan request has low priority : flush cache before scanning : force a scan even if the interface is configured as AP and the beaconing has already been configured. This attribute is dangerous because will destroy stations performance as a lot of frames will be lost while scanning off-channel, therefore it must be used only when really needed : use a random MAC address for this scan (or for scheduled scan: a different one for every scan iteration). When the flag is set, depending on device capabilities the and attributes may also be given in which case only the masked bits will be preserved from the MAC address and the remainder randomised. If the attributes are not given full randomisation (46 bits, locally administered 1, multicast 0) is assumed. This flag must not be requested when the feature isn't supported, check the nl80211 feature flags for the device.

Enumerator
NL80211_SCAN_FLAG_LOW_PRIORITY
NL80211_SCAN_FLAG_FLUSH
NL80211_SCAN_FLAG_AP
NL80211_SCAN_FLAG_RANDOM_ADDR

Definition at line 4726 of file nl80211-new.h.

◆ nl80211_sched_scan_match_attr

enum nl80211_sched_scan_match_attr

enum nl80211_sched_scan_match_attr - scheduled scan match attributes : attribute number 0 is reserved : SSID to be used for matching, only report BSS with matching SSID. : RSSI threshold (in dBm) for reporting a BSS in scan results. Filtering is turned off if not specified. Note that if this attribute is in a match set of its own, then it is treated as the default value for all matchsets with an SSID, rather than being a matchset of its own without an RSSI filter. This is due to problems with how this API was implemented in the past. Also, due to the same problem, the only way to create a matchset with only an RSSI filter (with this attribute) is if there's only a single matchset with the RSSI attribute. : highest scheduled scan filter attribute number currently defined : internal use

Enumerator
__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID
NL80211_SCHED_SCAN_MATCH_ATTR_SSID
NL80211_SCHED_SCAN_MATCH_ATTR_RSSI
__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST
NL80211_SCHED_SCAN_MATCH_ATTR_MAX

Definition at line 3047 of file nl80211-new.h.

◆ nl80211_sched_scan_plan

enum nl80211_sched_scan_plan

enum nl80211_sched_scan_plan - scanning plan for scheduled scan : attribute number 0 is reserved : interval between scan iterations. In seconds (u32). : number of scan iterations in this scan plan (u32). The last scan plan must not specify this attribute because it will run infinitely. A value of zero is invalid as it will make the scan plan meaningless. : highest scheduled scan plan attribute number currently defined : internal use

Enumerator
__NL80211_SCHED_SCAN_PLAN_INVALID
NL80211_SCHED_SCAN_PLAN_INTERVAL
NL80211_SCHED_SCAN_PLAN_ITERATIONS
__NL80211_SCHED_SCAN_PLAN_AFTER_LAST
NL80211_SCHED_SCAN_PLAN_MAX

Definition at line 4902 of file nl80211-new.h.

◆ nl80211_smps_mode

enum nl80211_smps_mode

enum nl80211_smps_mode - SMPS mode

Requested SMPS mode (for AP mode)

: SMPS off (use all antennas). : static SMPS (use a single antenna) : dynamic smps (start with a single antenna and turn on other antennas after CTS/RTS).

Enumerator
NL80211_SMPS_OFF
NL80211_SMPS_STATIC
NL80211_SMPS_DYNAMIC
__NL80211_SMPS_AFTER_LAST
NL80211_SMPS_MAX

Definition at line 4761 of file nl80211-new.h.

◆ nl80211_sta_bss_param

enum nl80211_sta_bss_param

enum nl80211_sta_bss_param - BSS information collected by STA

These attribute types are used with NL80211_STA_INFO_BSS_PARAM when getting information about the bitrate of a station.

: attribute number 0 is reserved : whether CTS protection is enabled (flag) : whether short preamble is enabled (flag) : whether short slot time is enabled (flag) : DTIM period for beaconing (u8) : Beacon interval (u16) : highest sta_bss_param number currently defined : internal use

Enumerator
__NL80211_STA_BSS_PARAM_INVALID
NL80211_STA_BSS_PARAM_CTS_PROT
NL80211_STA_BSS_PARAM_SHORT_PREAMBLE
NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME
NL80211_STA_BSS_PARAM_DTIM_PERIOD
NL80211_STA_BSS_PARAM_BEACON_INTERVAL
__NL80211_STA_BSS_PARAM_AFTER_LAST
NL80211_STA_BSS_PARAM_MAX

Definition at line 2596 of file nl80211-new.h.

◆ nl80211_sta_flags

enum nl80211_sta_flags

enum nl80211_sta_flags - station flags

Station flags. When a station is added to an AP interface, it is assumed to be already associated (and hence authenticated.)

: attribute number 0 is reserved : station is authorized (802.1X) : station is capable of receiving frames with short barker preamble : station is WME/QoS capable : station uses management frame protection : station is authenticated : station is a TDLS peer – this flag should only be used in managed mode (even in the flags mask). Note that the flag can't be changed, it is only valid while adding a station, and attempts to change it will silently be ignored (rather than rejected as errors.) : station is associated; used with drivers that support NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a previously added station into associated state : highest station flag number currently defined : internal use

Enumerator
__NL80211_STA_FLAG_INVALID
NL80211_STA_FLAG_AUTHORIZED
NL80211_STA_FLAG_SHORT_PREAMBLE
NL80211_STA_FLAG_WME
NL80211_STA_FLAG_MFP
NL80211_STA_FLAG_AUTHENTICATED
NL80211_STA_FLAG_TDLS_PEER
NL80211_STA_FLAG_ASSOCIATED
__NL80211_STA_FLAG_AFTER_LAST
NL80211_STA_FLAG_MAX

Definition at line 2482 of file nl80211-new.h.

◆ nl80211_sta_info

enum nl80211_sta_info

enum nl80211_sta_info - station information

These attribute types are used with NL80211_ATTR_STA_INFO when getting information about a station.

: attribute number 0 is reserved : time since last activity (u32, msecs) : total received bytes (MPDU length) (u32, from this station) : total transmitted bytes (MPDU length) (u32, to this station) : total received bytes (MPDU length) (u64, from this station) : total transmitted bytes (MPDU length) (u64, to this station) : signal strength of last received PPDU (u8, dBm) : current unicast tx rate, nested attribute containing info as possible, see &enum nl80211_rate_info : total received packet (MSDUs and MMPDUs) (u32, from this station) : total transmitted packets (MSDUs and MMPDUs) (u32, to this station) : total retries (MPDUs) (u32, to this station) : total failed packets (MPDUs) (u32, to this station) : signal strength average (u8, dBm) : the station's mesh LLID : the station's mesh PLID : peer link state for the station (see enum nl80211_plink_state) : last unicast data frame rx rate, nested attribute, like NL80211_STA_INFO_TX_BITRATE. : current station's view of BSS, nested attribute containing info as possible, see &enum nl80211_sta_bss_param : time since the station is last connected : Contains a struct nl80211_sta_flag_update. : count of times beacon loss was detected (u32) : timing offset with respect to this STA (s64) : local mesh STA link-specific power mode : peer mesh STA link-specific power mode : neighbor mesh STA power save mode towards non-peer STA : per-chain signal strength of last PPDU Contains a nested array of signal strength attributes (u8, dBm) : per-chain signal strength average Same format as NL80211_STA_INFO_CHAIN_SIGNAL. : expected throughput considering also the 802.11 header (u32, kbps) : RX packets dropped for unspecified reasons (u64) : number of beacons received from this peer (u64) : signal strength average for beacons only (u8, dBm) : per-TID statistics (see &enum nl80211_tid_stats) This is a nested attribute where each the inner attribute number is the TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames; each one of those is again nested with &enum nl80211_tid_stats attributes carrying the actual values. : aggregate PPDU duration for all frames received from the station (u64, usec) : attribute used for padding for 64-bit alignment : internal : highest possible station info attribute

Enumerator
__NL80211_STA_INFO_INVALID
NL80211_STA_INFO_INACTIVE_TIME
NL80211_STA_INFO_RX_BYTES
NL80211_STA_INFO_TX_BYTES
NL80211_STA_INFO_LLID
NL80211_STA_INFO_PLID
NL80211_STA_INFO_PLINK_STATE
NL80211_STA_INFO_SIGNAL
NL80211_STA_INFO_TX_BITRATE
NL80211_STA_INFO_RX_PACKETS
NL80211_STA_INFO_TX_PACKETS
NL80211_STA_INFO_TX_RETRIES
NL80211_STA_INFO_TX_FAILED
NL80211_STA_INFO_SIGNAL_AVG
NL80211_STA_INFO_RX_BITRATE
NL80211_STA_INFO_BSS_PARAM
NL80211_STA_INFO_CONNECTED_TIME
NL80211_STA_INFO_STA_FLAGS
NL80211_STA_INFO_BEACON_LOSS
NL80211_STA_INFO_T_OFFSET
NL80211_STA_INFO_LOCAL_PM
NL80211_STA_INFO_PEER_PM
NL80211_STA_INFO_NONPEER_PM
NL80211_STA_INFO_RX_BYTES64
NL80211_STA_INFO_TX_BYTES64
NL80211_STA_INFO_CHAIN_SIGNAL
NL80211_STA_INFO_CHAIN_SIGNAL_AVG
NL80211_STA_INFO_EXPECTED_THROUGHPUT
NL80211_STA_INFO_RX_DROP_MISC
NL80211_STA_INFO_BEACON_RX
NL80211_STA_INFO_BEACON_SIGNAL_AVG
NL80211_STA_INFO_TID_STATS
NL80211_STA_INFO_RX_DURATION
NL80211_STA_INFO_PAD
__NL80211_STA_INFO_AFTER_LAST
NL80211_STA_INFO_MAX

Definition at line 2674 of file nl80211-new.h.

◆ nl80211_sta_p2p_ps_status

enum nl80211_sta_p2p_ps_status

enum nl80211_sta_p2p_ps_status - station support of P2P PS

: station doesn't support P2P PS mechanism @NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism : number of values

Enumerator
NL80211_P2P_PS_UNSUPPORTED
NL80211_P2P_PS_SUPPORTED
NUM_NL80211_P2P_PS_STATUS

Definition at line 2504 of file nl80211-new.h.

◆ nl80211_sta_wme_attr

enum nl80211_sta_wme_attr

enum nl80211_sta_wme_attr - station WME attributes : invalid number for nested attribute : bitmap of uapsd queues. the format is the same as the AC bitmap in the QoS info field. : max service period. the format is the same as the MAX_SP field in the QoS info field (but already shifted down). : internal : highest station WME attribute

Enumerator
__NL80211_STA_WME_INVALID
NL80211_STA_WME_UAPSD_QUEUES
NL80211_STA_WME_MAX_SP
__NL80211_STA_WME_AFTER_LAST
NL80211_STA_WME_MAX

Definition at line 4435 of file nl80211-new.h.

◆ nl80211_survey_info

enum nl80211_survey_info

enum nl80211_survey_info - survey information

These attribute types are used with NL80211_ATTR_SURVEY_INFO when getting information about a survey.

: attribute number 0 is reserved : center frequency of channel : noise level of channel (u8, dBm) : channel is currently being used : amount of time (in ms) that the radio was turned on (on channel or globally) : amount of the time the primary channel was sensed busy (either due to activity or energy detect) : amount of time the extension channel was sensed busy : amount of time the radio spent receiving data (on channel or globally) : amount of time the radio spent transmitting data (on channel or globally) : time the radio spent for scan (on this channel or globally) : attribute used for padding for 64-bit alignment : highest survey info attribute number currently defined : internal use

Enumerator
__NL80211_SURVEY_INFO_INVALID
NL80211_SURVEY_INFO_FREQUENCY
NL80211_SURVEY_INFO_NOISE
NL80211_SURVEY_INFO_IN_USE
NL80211_SURVEY_INFO_TIME
NL80211_SURVEY_INFO_TIME_BUSY
NL80211_SURVEY_INFO_TIME_EXT_BUSY
NL80211_SURVEY_INFO_TIME_RX
NL80211_SURVEY_INFO_TIME_TX
NL80211_SURVEY_INFO_TIME_SCAN
NL80211_SURVEY_INFO_PAD
__NL80211_SURVEY_INFO_AFTER_LAST
NL80211_SURVEY_INFO_MAX

Definition at line 3177 of file nl80211-new.h.

◆ nl80211_tdls_operation

enum nl80211_tdls_operation

enum nl80211_tdls_operation - values for NL80211_ATTR_TDLS_OPERATION : Send a TDLS discovery request : Setup TDLS link : Teardown a TDLS link which is already established : Enable TDLS link : Disable TDLS link

Enumerator
NL80211_TDLS_DISCOVERY_REQ
NL80211_TDLS_SETUP
NL80211_TDLS_TEARDOWN
NL80211_TDLS_ENABLE_LINK
NL80211_TDLS_DISABLE_LINK

Definition at line 4476 of file nl80211-new.h.

◆ nl80211_tdls_peer_capability

enum nl80211_tdls_peer_capability

enum nl80211_tdls_peer_capability - TDLS peer flags.

Used by tdls_mgmt() to determine which conditional elements need to be added to TDLS Setup frames.

: TDLS peer is HT capable. : TDLS peer is VHT capable. : TDLS peer is WMM capable.

Enumerator
NL80211_TDLS_PEER_HT
NL80211_TDLS_PEER_VHT
NL80211_TDLS_PEER_WMM

Definition at line 4883 of file nl80211-new.h.

◆ nl80211_tid_stats

enum nl80211_tid_stats

enum nl80211_tid_stats - per TID statistics attributes : attribute number 0 is reserved : number of MSDUs received (u64) : number of MSDUs transmitted (or attempted to transmit; u64) : number of retries for transmitted MSDUs (not counting the first attempt; u64) : number of failed transmitted MSDUs (u64) : attribute used for padding for 64-bit alignment : number of attributes here : highest numbered attribute here

Enumerator
__NL80211_TID_STATS_INVALID
NL80211_TID_STATS_RX_MSDU
NL80211_TID_STATS_TX_MSDU
NL80211_TID_STATS_TX_MSDU_RETRIES
NL80211_TID_STATS_TX_MSDU_FAILED
NL80211_TID_STATS_PAD
NUM_NL80211_TID_STATS
NL80211_TID_STATS_MAX

Definition at line 2729 of file nl80211-new.h.

◆ nl80211_tx_power_setting

enum nl80211_tx_power_setting

enum nl80211_tx_power_setting - TX power adjustment : automatically determine transmit power : limit TX power by the mBm parameter : fix TX power to the mBm parameter

Enumerator
NL80211_TX_POWER_AUTOMATIC
NL80211_TX_POWER_LIMITED
NL80211_TX_POWER_FIXED

Definition at line 3915 of file nl80211-new.h.

◆ nl80211_tx_rate_attributes

enum nl80211_tx_rate_attributes

enum nl80211_tx_rate_attributes - TX rate set attributes : invalid : Legacy (non-MCS) rates allowed for TX rate selection in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with 1 = 500 kbps) but without the IE length restriction (at most NL80211_MAX_SUPP_RATES in a single array). : HT (MCS) rates allowed for TX rate selection in an array of MCS numbers. : VHT rates allowed for TX rate selection, see &struct nl80211_txrate_vht : configure GI, see &enum nl80211_txrate_gi : internal : highest TX rate attribute

Enumerator
__NL80211_TXRATE_INVALID
NL80211_TXRATE_LEGACY
NL80211_TXRATE_HT
NL80211_TXRATE_VHT
NL80211_TXRATE_GI
__NL80211_TXRATE_AFTER_LAST
NL80211_TXRATE_MAX

Definition at line 3795 of file nl80211-new.h.

◆ nl80211_txq_attr

enum nl80211_txq_attr

enum nl80211_txq_attr - TX queue parameter attributes : Attribute number 0 is reserved : AC identifier (NL80211_AC_*) : Maximum burst time in units of 32 usecs, 0 meaning disabled : Minimum contention window [a value of the form 2^n-1 in the range 1..32767] : Maximum contention window [a value of the form 2^n-1 in the range 1..32767] : Arbitration interframe space [0..255] : Internal : Maximum TXQ attribute number

Enumerator
__NL80211_TXQ_ATTR_INVALID
NL80211_TXQ_ATTR_AC
NL80211_TXQ_ATTR_TXOP
NL80211_TXQ_ATTR_CWMIN
NL80211_TXQ_ATTR_CWMAX
NL80211_TXQ_ATTR_AIFS
__NL80211_TXQ_ATTR_AFTER_LAST
NL80211_TXQ_ATTR_MAX

Definition at line 3486 of file nl80211-new.h.

◆ nl80211_txrate_gi

enum nl80211_txrate_gi

Enumerator
NL80211_TXRATE_DEFAULT_GI
NL80211_TXRATE_FORCE_SGI
NL80211_TXRATE_FORCE_LGI

Definition at line 3818 of file nl80211-new.h.

◆ nl80211_user_reg_hint_type

enum nl80211_user_reg_hint_type

enum nl80211_user_reg_hint_type - type of user regulatory hint

: a user sent the hint. This is always assumed if the attribute is not set. : the hint comes from a cellular base station. Device drivers that have been tested to work properly to support this type of hint can enable these hints by setting the NL80211_FEATURE_CELL_BASE_REG_HINTS feature capability on the struct wiphy. The wireless core will ignore all cell base station hints until at least one device present has been registered with the wireless core that has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a supported feature. : a user sent an hint indicating that the platform is operating in an indoor environment.

Enumerator
NL80211_USER_REG_HINT_USER
NL80211_USER_REG_HINT_CELL_BASE
NL80211_USER_REG_HINT_INDOOR

Definition at line 3144 of file nl80211-new.h.

◆ nl80211_wowlan_tcp_attrs

enum nl80211_wowlan_tcp_attrs

enum nl80211_wowlan_tcp_attrs - WoWLAN TCP connection parameters : invalid number for nested attributes : source IPv4 address (in network byte order) : destination IPv4 address (in network byte order) : destination MAC address, this is given because route lookup when configured might be invalid by the time we suspend, and doing a route lookup when suspending is no longer possible as it might require ARP querying. : source port (u16); optional, if not given a socket and port will be allocated : destination port (u16) : data packet payload, at least one byte. For feature advertising, a u32 attribute holding the maximum length of the data payload. : data packet sequence configuration (if desired), a &struct nl80211_wowlan_tcp_data_seq. For feature advertising it is just a flag : data packet token configuration, see &struct nl80211_wowlan_tcp_data_token and for advertising see &struct nl80211_wowlan_tcp_data_token_feature. : data interval in seconds, maximum interval in feature advertising (u32) : wake packet payload, for advertising a u32 attribute holding the maximum length : Wake packet payload mask, not used for feature advertising. The mask works like but on the TCP payload only. : number of TCP attributes : highest attribute number

Enumerator
__NL80211_WOWLAN_TCP_INVALID
NL80211_WOWLAN_TCP_SRC_IPV4
NL80211_WOWLAN_TCP_DST_IPV4
NL80211_WOWLAN_TCP_DST_MAC
NL80211_WOWLAN_TCP_SRC_PORT
NL80211_WOWLAN_TCP_DST_PORT
NL80211_WOWLAN_TCP_DATA_PAYLOAD
NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ
NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN
NL80211_WOWLAN_TCP_DATA_INTERVAL
NL80211_WOWLAN_TCP_WAKE_PAYLOAD
NL80211_WOWLAN_TCP_WAKE_MASK
NUM_NL80211_WOWLAN_TCP
MAX_NL80211_WOWLAN_TCP

Definition at line 4188 of file nl80211-new.h.

◆ nl80211_wowlan_triggers

enum nl80211_wowlan_triggers

enum nl80211_wowlan_triggers - WoWLAN trigger definitions : invalid number for nested attributes : wake up on any activity, do not really put the chip into a special state – works best with chips that have support for low-power operation already (flag) Note that this mode is incompatible with all of the others, if any others are even supported by the device. : wake up on disconnect, the way disconnect is detected is implementation-specific (flag) : wake up on magic packet (6x 0xff, followed by 16 repetitions of MAC addr, anywhere in payload) (flag) : wake up on the specified packet patterns which are passed in an array of nested attributes, each nested attribute defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern. Each pattern defines a wakeup packet. Packet offset is associated with each pattern which is used while matching the pattern. The matching is done on the MSDU, i.e. as though the packet was an 802.3 packet, so the pattern matching is done after the packet is converted to the MSDU.

In NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute carrying a &struct nl80211_pattern_support.

When reporting wakeup. it is a u32 attribute containing the 0-based index of the pattern that caused the wakeup, in the patterns passed to the kernel when configuring. : Not a real trigger, and cannot be used when setting, used only to indicate that GTK rekeying is supported by the device (flag) : wake up on GTK rekey failure (if done by the device) (flag) : wake up on EAP Identity Request packet (flag) : wake up on 4-way handshake (flag) : wake up when rfkill is released (on devices that have rfkill in the device) (flag) : For wakeup reporting only, contains the 802.11 packet that caused the wakeup, e.g. a deauth frame. The frame may be truncated, the attribute contains the original length. : Original length of the 802.11 packet, may be bigger than the attribute if the packet was truncated somewhere. : For wakeup reporting only, contains the 802.11 packet that caused the wakeup, e.g. a magic packet. The frame may be truncated, the attribute contains the original length. : Original length of the 802.3 packet, may be bigger than the attribute if the packet was truncated somewhere. : TCP connection wake, see DOC section "TCP connection wakeup" for more details. This is a nested attribute containing the exact information for establishing and keeping alive the TCP connection. : For wakeup reporting only, the wakeup packet was received on the TCP connection : For wakeup reporting only, the TCP connection was lost or failed to be established : For wakeup reporting only, the TCP connection ran out of tokens to use for data to send to the service : wake up when a configured network is detected. This is a nested attribute that contains the same attributes used with . It specifies how the scan is performed (e.g. the interval, the channels to scan and the initial delay) as well as the scan results that will trigger a wake (i.e. the matchsets). This attribute is also sent in a response to , indicating the number of match sets supported by the driver (u32). : nested attribute containing an array with information about what triggered the wake up. If no elements are present in the array, it means that the information is not available. If more than one element is present, it means that more than one match occurred. Each element in the array is a nested attribute that contains one optional NL80211_ATTR_SSID attribute and one optional NL80211_ATTR_SCAN_FREQUENCIES attribute. At least one of these attributes must be present. If NL80211_ATTR_SCAN_FREQUENCIES contains more than one frequency, it means that the match occurred in more than one channel. : number of wake on wireless triggers : highest wowlan trigger attribute number

These nested attributes are used to configure the wakeup triggers and to report the wakeup reason(s).

Enumerator
__NL80211_WOWLAN_TRIG_INVALID
NL80211_WOWLAN_TRIG_ANY
NL80211_WOWLAN_TRIG_DISCONNECT
NL80211_WOWLAN_TRIG_MAGIC_PKT
NL80211_WOWLAN_TRIG_PKT_PATTERN
NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED
NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE
NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST
NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE
NL80211_WOWLAN_TRIG_RFKILL_RELEASE
NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211
NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN
NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023
NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN
NL80211_WOWLAN_TRIG_TCP_CONNECTION
NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH
NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST
NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS
NL80211_WOWLAN_TRIG_NET_DETECT
NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS
NUM_NL80211_WOWLAN_TRIG
MAX_NL80211_WOWLAN_TRIG

Definition at line 4070 of file nl80211-new.h.

◆ nl80211_wpa_versions

enum nl80211_wpa_versions

Enumerator
NL80211_WPA_VERSION_1
NL80211_WPA_VERSION_2

Definition at line 3720 of file nl80211-new.h.

◆ plink_actions

enum plink_actions

enum nl80211_plink_action - actions to perform in mesh peers

: perform no action : start mesh peer link establishment : block traffic from this mesh peer : number of possible actions

Enumerator
NL80211_PLINK_ACTION_NO_ACTION
NL80211_PLINK_ACTION_OPEN
NL80211_PLINK_ACTION_BLOCK
NUM_NL80211_PLINK_ACTIONS

Definition at line 4377 of file nl80211-new.h.

Function Documentation

◆ attribute()

struct nl80211_sta_flag_update __attribute__ ( (packed) )

Variable Documentation

◆ attribute

struct fft_sample_ath10k __attribute__

◆ band

__u8 band

Definition at line 128 of file nl80211-new.h.

◆ delta

__s8 delta

Definition at line 129 of file nl80211-new.h.

◆ mask

__u32 mask

Definition at line 128 of file nl80211-new.h.

◆ max_delay

__u32 max_delay

Definition at line 130 of file nl80211-new.h.

◆ max_pattern_len

__u32 max_pattern_len

Definition at line 130 of file nl80211-new.h.

◆ max_patterns

__u32 max_patterns

Definition at line 128 of file nl80211-new.h.

◆ max_pkt_offset

__u32 max_pkt_offset

Definition at line 131 of file nl80211-new.h.

◆ max_rules

__u32 max_rules

Definition at line 128 of file nl80211-new.h.

◆ min_pattern_len

__u32 min_pattern_len

Definition at line 129 of file nl80211-new.h.

◆ pat

struct nl80211_pattern_support pat

Definition at line 129 of file nl80211-new.h.

◆ set

__u32 set

Definition at line 129 of file nl80211-new.h.

SENF Extensible Network Framework

Classes

Macros

Enumerations

Functions

Variables

Macro Definition Documentation

◆ __NL80211_WOWLAN_PKTPAT_INVALID

◆ MAX_NL80211_WOWLAN_PKTPAT

◆ NL80211_ATTR_AKM_SUITES

◆ NL80211_ATTR_AUTH_TYPE

◆ NL80211_ATTR_BSS_BASIC_RATES

◆ NL80211_ATTR_CIPHER_SUITE_GROUP

◆ NL80211_ATTR_CIPHER_SUITES_PAIRWISE

◆ NL80211_ATTR_FEATURE_FLAGS [1/2]

◆ NL80211_ATTR_FEATURE_FLAGS [2/2]

◆ NL80211_ATTR_FRAME

◆ NL80211_ATTR_HT_CAPABILITY

◆ NL80211_ATTR_IE

◆ NL80211_ATTR_IFACE_SOCKET_OWNER

◆ NL80211_ATTR_KEY

◆ NL80211_ATTR_KEYS

◆ NL80211_ATTR_MESH_PARAMS

◆ NL80211_ATTR_MGMT_SUBTYPE

◆ NL80211_ATTR_REASON_CODE

◆ NL80211_ATTR_REG_INITIATOR

◆ NL80211_ATTR_REG_TYPE

◆ NL80211_ATTR_SCAN_GENERATION

◆ NL80211_ATTR_SCHED_SCAN_MATCH_SSID

◆ NL80211_ATTR_SSID

◆ NL80211_ATTR_WIPHY_CHANNEL_TYPE

◆ NL80211_ATTR_WIPHY_FREQ

◆ NL80211_ATTR_WIPHY_TXQ_PARAMS

◆ NL80211_ATTR_WPA_VERSIONS

◆ NL80211_BAND_ATTR_HT_CAPA

◆ NL80211_CMD_ASSOCIATE

◆ NL80211_CMD_AUTHENTICATE

◆ NL80211_CMD_CONNECT

◆ NL80211_CMD_DEAUTHENTICATE

◆ NL80211_CMD_DISASSOCIATE

◆ NL80211_CMD_GET_MESH_PARAMS

◆ NL80211_CMD_REG_BEACON_HINT

◆ NL80211_CMD_REG_CHANGE

◆ NL80211_CMD_SET_BSS

◆ NL80211_CMD_SET_MESH_PARAMS

◆ NL80211_CMD_SET_MGMT_EXTRA_IE

◆ NL80211_CQM_TXE_MAX_INTVL

◆ NL80211_CRIT_PROTO_MAX_DURATION

◆ NL80211_FREQUENCY_ATTR_GO_CONCURRENT

◆ NL80211_FREQUENCY_ATTR_MAX_TX_POWER

◆ NL80211_FREQUENCY_ATTR_NO_IBSS

◆ NL80211_FREQUENCY_ATTR_NO_IR

◆ NL80211_FREQUENCY_ATTR_PASSIVE_SCAN

◆ NL80211_GENL_NAME

◆ NL80211_HT_CAPABILITY_LEN

◆ NL80211_KCK_LEN

◆ NL80211_KEK_LEN

◆ NL80211_MAX_NR_AKM_SUITES

◆ NL80211_MAX_NR_CIPHER_SUITES

◆ NL80211_MAX_SUPP_HT_RATES

◆ NL80211_MAX_SUPP_RATES

◆ NL80211_MAX_SUPP_REG_RULES

◆ NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE

◆ NL80211_MIN_REMAIN_ON_CHANNEL_TIME

◆ NL80211_MULTICAST_GROUP_CONFIG

◆ NL80211_MULTICAST_GROUP_MLME

◆ NL80211_MULTICAST_GROUP_NAN

◆ NL80211_MULTICAST_GROUP_REG

◆ NL80211_MULTICAST_GROUP_SCAN

◆ NL80211_MULTICAST_GROUP_TESTMODE

◆ NL80211_MULTICAST_GROUP_VENDOR

◆ NL80211_NAN_FUNC_SERVICE_ID_LEN

◆ NL80211_NAN_FUNC_SERVICE_SPEC_INFO_MAX_LEN

◆ NL80211_NAN_FUNC_SRF_MAX_LEN

◆ NL80211_REPLAY_CTR_LEN

◆ NL80211_RRF_GO_CONCURRENT

◆ NL80211_RRF_NO_HT40

◆ NL80211_RRF_NO_IBSS

◆ NL80211_RRF_NO_IR

◆ NL80211_RRF_NO_IR_ALL